JUKI RS-1 SMT Machine 24VDC 4 input Channels SMT Vibration Feeder Model Number: S-JVF02 1. 4 Input Channel 2. Voltage: 24VDC 3. Model Compatible: RS-1 Features Direct control by machine. Both the amplitude as well as the frequency can be adjusted on the vibration tube  FEEDER. This allows an optimal adjustment of the infeed to the set-up components. The vibration starts automatically by removing the components and stops automatically after a set length of time. This ensures that sufficient components are always available.

1. Product Manual
Ｓ－ＪＶＦ０２ Ｖｉｂｅ Ｆｅｅｄｅｒ

2. Product manual for installation, set-up and part list
Ｓ－ＪＶＦ０２ Ｖｉｂｅ Ｆｅｅｄｅｒ
Ｓｈｅｎｚｈｅｎ Ｓｏｕｔｈｅｒｎ Ｍａｃｈｉｎｅｒｙ Ｓａｌｅｓ ａｎｄ Ｓｅｒｖｉｃｅ Ｃｏ．，Ｌｔｄ
Room 1806 ,block 3,Jinyun COFCO, Qianjing 2 Road ,Baoan District,Shenzhen City, China
www.smthelp.com

3. 1
Ｓｔｅｐ １： ｐｕｔ ｕｐ ｔｈｅ ｈａｎｄｌｅｂａｒ
Ｓｔｅｐ ２： ａｉｍｅｄ ａｔ ｔｈｅ ａｌｉｇｎｍｅｎｔ ｈｏｌｅ
Installation

4. 1 Installation
Ｓｔｅｐ ３： ａｉｍｅｄ ａｔ ｔｈｅ ｃｏｎｎｅｃｔｏｒ
Ｓｔｅｐ ４： ｒｅｌｅａｓｅ ｔｈｅ ｈａｎｄｌｅｂａｒ ａｎｄ ｌｏｃｋ ｉｎ ｔｈｅ ｆｅｅｄｅｒ ｂａｎｋ

5. ２ Ｓｅｔ－ｕｐ
Ａｓ ｓｈｏｗｎ ｉｎ ｔｈｅ ｆｉｇｕｒｅ：
1,The end of tube should above the support frame , and fixed by locating ring
2,Middle part of tube should under the leaf sping and being in the pressure
３，Ｔｈｅ ｆｒｏｎｔ－ｅｎｄ ｏｆ ｔｕｂｅ ｓｈｏｕｌｄ ｆｉｘｅｄ ｂｙ ｌｏｃａｔｉｎｇ ｐｉｅｃｅ， ｔｈｅｎ ｃｕｔ ｏｆｆ ｔｈｅ ｔｏｐ ｆａｃｅ ｏｆ ｎｏｚｚｌｅ ｐｉｃｋｉｎｇ ａｒｅａ ｏｎ ｔｕｂｅ
４．Ｐｏｗｅｒ ｏｎ
５，Ｔｅｓｔ ａｎｄ ｇｅｔ ｔｈｅ ｃｏｒｒｅｃｔ ｆｒｅｑｕｅｎｃｙ ａｎｄ ｐｏｗｅｒ ｓｅｔｔｉｎｇ ｔｏ ｒｕｎ ｃｏｍｐｏｎｅｎｔｓ ｓｍｏｏｔｈ ａｎｄ ｓｐｅｅｄｙ
Ｆｉｎｉｓｈｅｄ

6. ３ Ｐａｒｔ ｌｉｓｔ

7. ｗｗｗ．ｓｍｔｈｅｌｐ．ｃｏｍ
Room 1806 ,block 3,Jinyun COFCO,
Shenzhen City, China
ＥＮＤ
ｉｎｆｏ＠ｓｍｔｈｅｌｐ．ｃｏｍ
Ｑｉａｎｊｉｎｇ ２ Ｒｏａｄ ，Ｂａｏａｎ Ｄｉｓｔｒｉｃｔ，