1. BORE WELL SUBMERSIBLE PUMP SETS
SAER submersible pumps are renowned for their high efficiency and reliability throughout the range.
Made entirely of corrosion-resistant stainless steel, SAER submersible pumps are ideal for a wide variety
of applications.
SAER Submersible pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency
during periods of high demand, provide low long-term costs and high operating reliability regardless of
the application.
RADIAL SUBMERSIBLE ELECTRIC PUMPS
Operation Condition:Max Head
: 955 M (3133 ft.)
Max Capacity
: 210m3/Hr
Pumps size
: 4" 6" 8" 10"
Temp of Pumped Liquid: 0oC to 40oC
RPM
: 2900
Maximum immersion depth: 200 m under liquid level
Max pressure
: 22 bar
Grain size of silt: 200gm/m3
Pumps Construction:Impellers
: Polycarbonate loaded with fiber glass.
Diffusers
: Noryl (techno polymer) loaded with fiber glass.
Shaft
: AISI431 stainless steel (on request, AISI316), with grooved profile.
Outlet and suction support: Brass or coated carbon steel (on request stainless steel AISI304)
External shell
: Stainless steel AISI304.
Other Materials Available on offer:Carbon Steel, Brass, SS-316, SS-304, Noryl, Cast Iron
Features:Complete unit of pump with electric motor oil bath range CL95

2. Hydraulic part to be connected with 4" submersible motors with coupling following NEMA MG1-18.388
The FS 98 series uses axial sliding floating impellers, which avoid the jam up of the pump even with the
presence of sand.
Outlet complete with non-return ball valve.
Driving bushings in anti-wear rubber.
Components realized with particular materials which assure a high wear resistance.
This pump is an ideal solution in pumping water with suspended sand particles up to 300 g/m3.
APPLICATION
Suitable for lifting, pressurizing and distribution in
Civil and industrial installations
Autoclave and cistern inlets
Washing plants
Irrigation systems
Draws from wells of min. diameter of 104 mm, tanks or natural basins.
INSTALLATION
Vertical / horizontal (depending on power).
SPECIAL VERSIONS
Range XFS98 with inlet and outlet in stainless steel AISI304 precision castings.

3. SEMI-AXIAL SUBMERSIBLE ELECTRIC PUMPS
Operation Condition:Max Head
: 388M (1273ft)
Max Capacity
: 725m3/hr
Pump Size
: 6", 8", 10", 12", 14"
Temp of Pumped Liquid: 0oC to 35oC
Frequency
: 50 Hz
Rpm
: 2900
Maximum immersion depth: 300 m under liquid level
Max pressure
: 45 bar
Grain size silt
: 300gm/m3
Pumps Construction:Impellers
: Cast iron EN-GJL-250 (brass for model K and X) or FeG450 steel.

4. Diffusers
: Cast iron EN-GJL-250 or FeG450 steel.
Shaft
: AISI431 stainless steel, with grooved profile.
Outlet
: Cast iron EN-GJL-250 or FeG450 steel.
Suction support : Cast iron EN-GJL-250 or FeG450 steel.
Materials Available:Carbon Steel, Brass, SS-316, Duplex Steel, Cast Iron
Features:Complete unit of pump with electric motor.
SP hydraulic part to be connected with 4" submersible motors with coupling following NEMA MG118.388 or 6" submersible motors with coupling following NEMA MG1-18.401- 18.413
Semi axial impellers.
Outlet complete with non-return valve.
Pump equipped with counter trust ring in anti-wear resin. Diffuser complete with wear ring in anti-wear
rubber.
Driving bushings in anti-wear rubber with metallic shell.
Components realized with particular materials which assure a high wear resistance.
INSTALLATION - Vertical.
SPECIAL VERSIONS
XS and XVS Series entirely made of stainless steel
SB series made of marine bronze (up to max 25 bar)
Different tensions
Version for horizontal installation.
APPLICATION
Suitable for lifting, pressurizing and distribution in
Civil and industrial installations,
Autoclave and cistern inlets,

5. Washing plants,
Irrigation systems.
Draws from wells of min. diameter of 158 mm, tanks or natural basins.
If you want to more info please visit our web site: http://www.emerge-india.com