Berthing etc-test 1

2. . We are going to drop sb anchor.
“ ”.
. Drop starboard anchor!
6 shackles must be put in the water.
“ ”.
1

3. . We are going to heave anchor.
. Start heaving port anchor.
. Anchor is loose from the ground.
. There are 3 shackles left to come in.
. Anchor has been fastened.
“ ”.
“ ”.
“ ”.
“ ”.
“ ”.
2

5. Ships are made are made fast to
by (A), (B), (C)
and (D).
A)……... B)……...
D)…..
C)….. C)…..

6. . We are going to berth on port side.
“ .”
. Fasten the lines forward and aft.
“ ”.
. Keep tension on the springs.
“ ”.

7. To prevent the h or s from being
fouled, the line is led through a .

9. 3
When the vessel is due to leave,
c orders are given by
the pilot or by the mate.
6

10. 3
When leaving berth the first orders are:
“ !:
”.
7

11. s
Casting off the headline:
s
8
“ the headline!”
“ the headline!”

12. 3
Write down the standard casting-off order
when you let go all but the essential lines:
9
““

13. 3
Write down the standard casting-off orders
when you let go your headline:
10
“ “

14. Write down the standard casting-off orders
when you let go your fore spring:
11
““

15. 3
Write down the standard casting-off orders
when you let go your aft spring and breastline:
12
“
“
“
“

16. 3
Write down the standard casting-off orders
when you let go your sternline:
13
“ “

17. “Propeller ;
starboard fifteen - ahead!”

18. “M , slow ahead!”

19. “Half ahead; s ”

20. sound
The helmorder “ ” is given to reduce
the amount of rudder and hold.

21. After an alteration of course the helm order
“ ”
is given to reduce the vessel’s swing rapidly.

22. The helmorder “ !” is given stop the swing
of the vessel’s head in a turn