1. Rubber Products
The Definition of Rubber Products
Rubber product refers to the natural and synthetic rubber as raw materials to have the
production of various rubber products, activities, including the use of waste rubber production
and rubber products.
General Rubber
Refers to replace some or all natural rubber using plastic, such as styrene butadiene rubber,
butadiene rubber, isoprene rubber, and it is mainly used in the manufacture of rubber
product. The demand of general rubber is large, and it is the main variety of synthetic rubber.
Styrene butadiene rubber is composed of butadiene and styrene copolymer made, and its
production is the largest in all general synthetic rubber. Butadiene rubber is made by solution
polymerization of butadiene, and polybutadiene rubber has excellent cold resistance, wear
resistance and elasticity. Ethylene propylene rubber has good aging resistance performance.
Butadiene rubber majority for the production of tires, but little part is used in the manufacture
of cold products, cushioning material, such as rubber overshoes and adhesive tape. The tear
resistance variation, wet skid resistance of Butadiene rubber is not good. Ethylene propylene
rubber takes ethylene and propylene as main raw materials, aging resistance, electrical
insulation and resistance to ozone outstanding performance. Many custom rubber products
are made of this material. A large number of Ethylene propylene can be used in oil filling and
filling of carbon black products in lower prices, but the ethylene-propylene rubber chemical
stability is good, with abrasion resistance, elasticity, resistance to oil and styrene butadiene
rubber. The range of uses in Ethylene propylene rubber are very wide, it can be used as a
tire sidewall rubber strip and the inner tube, and automotive parts, and it also can be used for
wire, cable sheathing and high pressure, high pressure insulating materials. It can produce
shoes, health supplies and other light products. Chloroprene rubber, with chloroprene as
main raw materials, through homopolymerization and small amounts of other monomers
copolymerized. Such as high tensile strength, heat resistance, light fastness, excellent aging
resistance, oil resistance is superior to natural rubber, styrene-butadiene rubber, butadiene
rubber. With strong resistance and excellent resistance to flame spread properties, chemical
stability in good water resistance.
The Introduction of PVC
PVC color is yellowish and translucent, shiny. Transparency is better than polyethylene. With
the additive dosage, it can be divided into soft, hard PVC products. The soft product is tough

2. and it feels sticky. Many pvc charms have also come to our daily life. Hard products hardness
is higher than that of low density polyethylene, polypropylene and below, in which there will
be a whitening phenomenon. Products: sheet metal, pipes, common soles, toys, doors and
windows, cable jacket, such as stationery. It is also a use of a chlorine atom substituted
polyethylene in a hydrogen atom of polymeric materials.
The article is come from:http://fashion.jewellryboxes.net/custom-rubber-products/rubber-
products.htm