This is a presentation giving a light introduction to open source hardware and the Make movement.

1. Arduino and
Raspberry Pi
An introduction to making and the make
movement.

2. What is an Arduino?

3. How are Arduinos being used?

4. Arduino Starter Kit

5. Getting started with Arduino
http://www.ladyada.net/learn/arduino/lesson1.html
/*
Blink
Turns on an LED on for one second, then off for one
second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH
is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by
making the voltage LOW
delay(1000); // wait for a second
}

6. Arduino demo
Let’s try it!

7. Resources for Arduino
http://youtube.com
http://ladyada.net
http://arduino.cc

8. What is a Raspberry Pi?

9. How are Raspberry Pis being used?

10. How are Raspberry Pis being used?

11. How are Raspberry Pis being used?

12. Take a look at this
http://makezine.com/2013/04/14/47-raspberry-
pi-projects-to-inspire-your-next-build/

13. How do I get started with Raspberry
Pi?

14. How do I get started with Raspberry
Pi?

15. Resources for Raspberry Pi
http://www.raspberrypi.org/faqs
http://en.wikipedia.org/wiki/Raspberry_Pi
http://ivanx.com/raspberrypi/

16. Raspberry Pi Demo
Let’s try it!

17. Thanks!
lemasney@gmail.com
http://lemasney.com
John LeMasney