Don't know how to install LED flexible strips? Never mind, here's an easy step-by-step beginner's guide for you! Check out these simple 7 steps and do it yourself now!

1. How to Install LED Flexible Strips ?
Single Color Non-waterproff LED Strip

2. Step 1
If you look closely at
the strip, there is a
line that can be cut
about every 2 inches.
Between every two
lines, there is a
complete circuit.

3. Step 2
Then, you can go
ahead and begin to cut
the strip. Use a pair of
scissors to cut the
LED strip along with
the line. You can have
the strip as small as 2
inches, or as long as
16.4 feet.

4. Step 3 (How to connect
two LED strips)
Kindly use connector to
connect two LED strips
together. Make sure you
connect the positive signs of
the two strips together, and the
negative signs together.

5. Step 4
Use a connector with the DC
plug to connect the LED strip
to the power supply. Make
sure that the red line is in the
direction with positive.

6. Step 5
This LED strip uses 12V
DC, so you can use a 12V
DC adapter to this project.

7. Step 7
Now you can light the sections
of under cabinet in your room,
or a couple of picture frames
on the wall, or whatever you
can think of.