solar power plant for domestic and industrial purpose. kindly find attached case study for your kind information.

1. Made Company,
by, Chintan Lobel Solar Power System
Gandhi www.lobelpower.com
09327007854
Site: Madurai, India
Plant Size : 1.5 KW

2. Presentation . . .
Solar energy is one of the main source of
energy available abundant in India. This
presentation is based on Installation of Solar
Photovoltaic System for a residence.
The Project . . .
To get electricity at non electrified hours and
save huge amount of money and carbon
dioxide by using renewable source of
energy.

3. Preparing for Installation
Site Visit : Before planning, it is essential
to visit the site and obtain the specific data
needed to design and install the system.

4. Step 1 : Preparation of system Installation
 Work Crew briefed on PV procedure
and safety Hazards.
 Component delivery scheduled.
 Component safely stored until
Installation.

5. Step 2 : Delivery of Mounting Structure
1. Height of House
2. Bringing Structure at
Roof
3. Structure at Roof

6. Step 3 Foundation of Mounting Structure
1. Foundation Material
2. Working with Foundation Materials

7. Step 4 Foundation Started on Roof
1. Gripping on Roof 2. Attaching Cement Bases
3. Making Area Wet and Clean 4. Putting Cement to Attach Base with Roof

8. 5. Cement Preparation
6. Cement Filling
9. Final base and
7. Cement Settlement 8. Filling of Cement Foundation shape

9.  Above given were the pictures for foundation process.
 Before fitting panels on structure, It needs to dry up for
whole night and continuously needs water spray to
harden up the cement and make foundation strong.
 During spare time, checking wirings and accessories.

10. Step 6 : Panels Fittings Started
1. Taking First Panes to Fit
2. First Panel on Structure
3. Fitting of Panels on Another
Structure

11. Step 7 : Checking Panels Inbuilt Wiring and
Junction Box
1. Checking Panels Wiring
2. Panels Junction Box 3. Junction Box Internal View

12. Step 8 : Wiring Connection of Panels
1. Panels Connectors
2. Extending Panels Wires
3. Connecting Panels into Series 4. Connecting Each Two’s into
Connection (Set of Two’s) Parallel

13. 5. Fixing All Wires Together with J-Locks along Structure and Panels
6. Yellow Wire Taken as Positive and Blue as Negative and Sending Wires
Down from Roof to Main Board

14. Step 9 : Connecting Batteries, Charge
Controller, Inverter and Panels with Main
Board
1. Blue Solar
2. Charge Controller With
Switch, Yellow MCB Switch
Switches
and White Main Board
Switch 3. Connecting Inverter
with
Switch, Batteries, and
Charge controller
5. Charge Controller
showing Green Light
4. Batteries, Each set of Two’s as Batteries in
in series and then in Parallel Charging Mode

15. Step 10 : Inspecting and Checking Readings
of Whole System
2. Whole Electrical
1. Final Roof - Morning System - Taking
Readings
3. Roof at Afternoon
4. Sunset Readings and Outputs

16. System Design
Whole system is designed in a way to use electricity in
Four ways,
 First we can use Solar Photovoltaic electricity and then
government grid electricity.
 First we use government grid electricity and then stored
Photovoltaic electricity from the batteries.
 Only Solar Photovoltaic generated electricity without any
consumption from government grid electricity.
 Shut down whole Solar PV plant and only use only govt.
electricity i.e. this may useful at the time of maintenance
and repairing of the system.

17. To Conclude
Presently the residence is having 24 hours
electricity with the investment of £3000.
 It is expected to save £45 every month from
this PV system which gives a rough payback
period of 6 years.
 According to International Carbon Bank
(ICBE) 0.75 tons of CO2 will be reduced per
year.
Thank You.