This document provides a summary of the Bureau of Indian Standards' publication of the public safety standard IS/ISO/PAS 17002 (2004) on conformity assessment and confidentiality principles and requirements.
The summary includes:
1) The publication aims to promote transparency and accountability in public authorities by making the public safety standard available to the public, particularly disadvantaged communities and those in education.
2) The standard establishes principles and requirements for managing confidential information obtained during conformity assessment activities in order to balance confidentiality needs with transparency requirements.
3) The standard contains 5 clauses outlining the scope, norms, terms, principles, and requirements related to confidentiality for conformity assessment bodies and accreditation bodies to follow
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Is.iso.pas.17002.2004[1]
1. Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to
information for citizens to secure access to information under the control of public authorities,
in order to promote transparency and accountability in the working of every public authority,
and whereas the attached publication of the Bureau of Indian Standards is of particular interest
to the public, particularly disadvantaged communities and those engaged in the pursuit of
education and knowledge, the attached public safety standard is made available to promote the
timely dissemination of this information in an accurate manner to the public.
इंटरनेट मानक
“!ान $ एक न' भारत का +नम-ण”
Satyanarayan Gangaram Pitroda
“Invent a New India Using Knowledge”
“प0रा1 को छोड न' 5 तरफ”
Jawaharlal Nehru
“Step Out From the Old to the New”
“जान1 का अ+धकार, जी1 का अ+धकार”
Mazdoor Kisan Shakti Sangathan
“The Right to Information, The Right to Live”
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”
Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”
“Invent a New India Using Knowledge”
है”ह”ह
IS/ISO/PAS 17002 (2004): Conformity assessment
confidentiality principles and requirements [MSD 10: Social
Responsibility]
2.
3.
4. ISIISOIPAS 17002:2004
Indian standard
CONFORMITY ASSESSMENT — CONFIDENTIALITY —
PRINCIPLES AND REQUIREMENTS
I(Y3 03.120.20
@ BIS 2007
BUREAU OF INDIAN STAN!3ARDS
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002
August 2007 Price Group 2
5. National Mirror Committee of CASCO, IRD 1
NATIONAL FOREWORD
This Indian Standard which is identical with lSO/PAS 17002:2004 ‘Conformity assessment — Confidentiality
— Principles and requirements’ issued by the International Organization for Standardization (ISO) was adopted
by the Bureau of Indian Standards on the recommendation of the NationahMirror Committee of CASCO and
approval of the Director General, Bureau of Indian Standards under Rule 8(3)C of BE Ru/es, 1987.
The text of lSO/PAS Standard has been approved as suitable for publication as an Indian Standard without
deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is
particularly drawn to the following:
a)
b)
Wherever the words ‘International Standard’ appear referring to this standard, they should be read as
‘Indian Standard’.
Comma (,) has been used as a decimal marker while in’ Indian Standards, the current practice is to
use a point (.) as the decimal marker.
6. lS/lSO/PAS 17002:2004
Introduction
In 2001 the ISO Council asked its policy committee on conformity assessment (lSO/CASCO) to study and
prepare a group of common elements for application in future ISO documents on conformity assessment.
Subsequent to this request, lSO/CASCO approved the formation of Working Group 23, Common elements in
/SO//EC Standards for conformity assessment activities, to undertake this task.
The working group has identified several common elements, including among others
— impartiality,
— confidentiality,
— complaints and appeals,
— management systems,
This Publicly Available Specification (PAS) addresses the “confidentiality” element that occurs in many of the
lSO/lEC Guides and International Standards on conformity assessment.
The PAS covers the agreed principles that give substance to the element of confidentiality, and also provides
requirements clauses intended to be included in future lSO/lEC International Standards on conformity
assessment.
This PAS is intended to apply to the drafling of documents on conformity assessment by lSO/CASCO.
Clause 4 (Principles) contains statements that are intended to orientate lSO/CASCO working groups in their
task of creating requirements to address confidentiality in their documents.
The requirements to be inserted into future lSO/CASCO documents that cover the common element of
“confidentiality are detailed in Clause 5. lSO/CASCO has adopted a common structure for the presentation of
requirements. Requirements should be grouped under one or more of the following headings:
a) General requirements;
b) Structural requirements;
c) Resource requirements;
d) Process requirements;
e) Management system requirements.
As such, each of the common elements will have requirements related to it grouped under one or more of the
headings shown above.
This PAS is not intended to become a future International Standard, At the end of three years after the date of
publication, it is expected this PAS will be withdrawn and its contents incorporated as appropriate in relevant
lSO/CASCO normative and guidance documents.
7. lS/lSO/PAS 17002:2004
Indian Standard
CONFORMITY ASSESSMENT — CONFIDENTIALITY —
PRINCIPLES AND REQUIREMENTS
1 Scope
This Publicly Available Specification (PAS) contains principles and requirements for the element of
confidentiality as it relates to conformity assessment.
It is an internal tool for use in the ISO standards development process by lSO/CASCO working groups when
addressing the element of confidentiality in the preparation of their documents.
This Publicly Available Specification is not a stand-alone normative document to be used directly in conformity
assessment activities,
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
lSO/lEC 17000, Conformity assessment — Vocabulary and general principles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in lSO/lEC 17000 apply.
NOTE The use of the term “body” in this PAS means either an accreditationbody or a conformity assessment body
as defined in lSO/lEC 17000.
4 Principles of confidentiality
4.1 To gain access to the information needed to conduct effective conformity assessment activities, the
body needs to provide confidence that confidential information will not be disclosed.
4.2 All organizations and individuals have the right to have protected any proprietary information that they
provide.
4.3 Managing the balance between confidentiality and public disclosure related requirements affects
stakeholders’ trust and their perception of value in the conformity assessment activities being performed.
NOTE It is intended that there will be a separate PAScoveringthe commonelementof publicdisclosure.
8. lS/lSO/PAS 17002:2004
5 Requirements for confidentiality
5,1 General
In developing this PAS it was recognised that there are varying degrees of specificity that lSO/CASCO
working groups should consider. As a result the requirements in this clause are categorized into three levels of
specificity as follows.
a) Obligatory: these are specific drafted requirements that shall be used by lSO/CASCO working groups
where the element has to be addressed, without modification, except for substitution of more specific
terms. For example, the phrase “Conformity assessment activities shall be undertaken impartially”, may
be substituted more specifically with “Management system certification activities shall be undertaken
impartially”. Justification is required from LSO/CASCO working groups that do not use these requirements
when dealing with the relevant common element.
b) Recommended: these are drafted requirements that working groups should use if they wish to have a
greater degree of specification. Modification is permissible.
c) Suggested: these are considerations that could be taken into account in the drafting of requirements by
the.ISOIGASGO working group.
By providing for these different levels of specificity, the PAS achieves the lSO/CASCO intent to have an
agreed statement on elements that are common to all conformity assessment activities, and at the same time
maintains some flexibility for specific wording by individual lSO/CASCO working groups.
5.2 General requirements
9
The following requirements are obligatory.
a)
b)
c)
5.3
The body shall be responsible, through legally enforceable commitments, for the management of all
information obtained or created during the performance of conformity assessment activities, The body
shall inform the client, in advance, of the information it intends to place in the public domain. Except for
information that the client makes publicly available, or when agreed between the body and the client (e.g.
for the purpose of responding to complaints), all other information is considered proprietary information
and shall be regarded as confidential.
information, the client or in~vidual
information provided.
Information about the client obtained
shall be treated as confidential.
Resource requirements
concerned shall, unless
from sources other than
When the body is required by law or authorized by contractual arrangements to release confidential
prohibited by law, be notified of the
the client (e.g. complainant, regulators)
5.3.1 Obligatory requirements
Personnel, including any committee members, contractors, personnel of external bodies, or individuals acting
on the body’s behalf, shall keep confidential all information obtained or created during the performance of the
body’s conformity assessment activities, except as required by law.
5.3.2 Recommended requirements
The body shall have available and use facilities for the secure handling (e.g. postage, e-mailing, record
destruction) of confidential information (e.g. documents, records) and objects of conformity assessment (e.g.
product samples),
2
10. , -..&.— J-”-- ——— ____
./,
—.— -
-1
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of /rrdian Standards Act, 1986 to promote
harmonious development of the activities of standardization, marking and quality certification of
goods and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of the these publications may be reproduced in
any form without the prior permission in writing of BIS. This does not preclude the free use, in the
course of implementing the standard, of necessary details, such as symbols and sizes, type or grade
designations. Enquiries relating to copyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are
also reviewed periodically; a standard alongwith amendments is reaffirmed when such review indicates
that no changes are needed; if the review indicates that changes are needed, it is taken up for revision.
Users of Indian Standards should ascertain that they are in possession of
edition by referring to the latest issue of ‘BIS Catalogue’ and ‘Standards:
This Indian Standard has been developed from Dot: No. IRD 1 (005).
Amendments Issued Since Publication
the latest amendments or
?
Monthly Additions’.
Amend No. Date of Issue Text Affected
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002
Telephones :23230131, 23233375, 23239402 Website : www. bis.org.in
Regional Offices : Telephones
{
2323’7617
23233841
{
23378499,23378561
23378626,23379120
{
2603843
2609285
{
22541216,22541442
22542519,22542315
{
28329295,28327858
28327891,28327892
-.
Central
Eastern
Northern
Southern
Western
Branches
: Manak Bhavan, 9 Bahadur Shah Zafar Marg
NEW DELHI 110002
1/14 C.I.T. Scheme Vll M, V.I.P. Road, Kankurgachi
KOLKATA 700054
: SCO 335-336, Sector 34-A, CHANDIGARH 160022
: C.I.T. Campus, IV Cross Road, CHENNAI 600113
: Manakalaya, E9 MlDC, Marol, Andheri (East)
MUMBAI 400093
A
: AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FARIDABAD.
GHAZIABAD. GtJWAHAT1. HYDERABAD. JAIPUR. KANPUR. LUCKNOW. NAGPUR.
PARWANOO. PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM. VISAKHAPATNAM.
Printed at Shri Gane.$h Associates, DeI~