2. ABSTRACT
Monitoring is very important in Industries.
Monitoring is done by sensor with most accuracy and
reliability.
In industry, maintenance officer send an command to the
PSoC chip via GSM.
PSoC decodes the commands and control the industrial
devices through relays.
3. OBJECTIVE
To deliver an uninterrupted output.
To reduce the maintenance cost and to optimize critical monitoring
system.
To allow easy use of mobiles in order to control industrial
machineries simultaneously.
To provide necessary data related to industry to a maintenance
officer located anywhere at any time.
4. EXISTING SYSTEM
RF Based System
-short distance communication
Wired technology
- Difficult to monitoring & long construction time
Wireless technology
-High cost and high power consumption
5. PROPOSED SYSTEM
We propound GSM BASED INDUSTRIAL
AUTOMATION SYSTEM.
The design of Stand alone embedded system can monitor and
control various process, equipment and critical systems.
The Systems are controlled by the mobile phone by sending
Commands via SMS.
GSM modem provides the communication media between the
authority and the system.
9. PSoC MICROCONTROLLER
It is an 8 bit microcontroller architecture.
In PSoC we have an additional peripheral units such as
operational amplifier, filter, D/A & A/D Converters in an
in-built manner we get the chip in small size
It reduce the power consumption.
Automatic code writing for accessing all the peripherals
and it will operate at low voltage supply -1V.
10. GSM MODEM
Global System for Mobile Communication (GSM) is a
wireless modem used for communicate computer with the
GSM network.
It requires SIM(Subscriber Identity Module) to activate
communication with network.
GSM needs AT commands to perform the operation such
as receive, send, delete, search, add SMS in a SIM.
11. RELAY
Relay is an Electromechanical device mostly used in
industrial automation.
It provide electronic to electrical interfacing.
It is used to switch on or off electrical circuits.
12. SENSORS
Sensors are sophisticated devices which is used to detect
and response to electrical or optical signal.
The sensor converts the physical parameters in to a signal
which is to be measured electrically.
Sensors are used in industrial process control,
measurement, monitoring and also used in aircraft,
medical products, automobiles etc.
13. APPLICATION
This project can be implemented in Home Automation
System.
Industrial Sensor processing and control.
Remote operations in Industries.
15. CONCLUSION
The GSM network is used to help the user to control the
system from a distant area by sending secret code.
Critical sensor monitoring by using wireless are the
challenges faced by the industries.
By this method we can easily made an interact with the
device and the user.