1. Semi-Finished Engineering Plastic Products.

2. TECAPEEK. The high-temperature plastic
with outstanding mechanical properties.
The hydrolysis resistance of TECAPEEK
extends to over 200° C. TECAPEEK insulates
electrically even at high voltages.
Electrical engineering and medical technology Gear wheel
as well as mechanical engineering and aerospa- TECAPEEK:
ce benefit from the outstanding load-bearing Torque transmission,
strength of TECAPEEK high-temperature
application, high sur-
face loads.
| Continuous operating temperature up to +
260° C and briefly even up to + 300° C
| Outstanding mechanical properties even at
high temperatures
| Outstanding resistance to chemicals Cam guide
TECAPEEK PVX:
| Hydrolysis resistance even above + 200° C Automation and robo-
tics, very good sliding
TECAPEEK
| Electrically insulating even with high volta- friction values, high
ges resistance to chemi-
cals.
| Excellent sliding properties
| Resistant to high-energy radiation
TECAPEEK TECAPEEK MT black Transport pinion
Continuous operating temperature Hydrolysis-resistant, autoclavable semi- TECAPEEK MT:
up to + 260° C. Outstanding mecha- finished product with approvals for Suitable for use with
nical properties even at high tempe- medical technology. foodstuffs, resistant to
ratures. sterilisation, dimensional-
TECAPEEK ELS ly stable.
TECAPEEK GF 30 defined electrical conductivity, carbon
Glassfibre-reinforced semi-finished fibre reinforced providing high strength,
product with enhanced strength. with approvals for use in semi-conductor
Excellent resistance to chemicals. technology and the electronics industry.
TECAPEEK CF 30 black TECAPEEK HT
Very high strength values thanks to very high abrasion and wear resistance,
the addition of carbon fibres. Enhan- high load-bearing capacity in static and
ced abrasion resistance. dynamic conditions, excellent chemical
resistance.
TECAPEEK PVX black
Very good sliding and friction values. TECAPEEK TF 10
Suitable for bearing parts subject to Very good sliding and friction propertics,
high loads. suitable for soft mating partners.
Electrically insulating. 43

3. Rods Tolerance TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK
to DIN GF 30 CF 30 PVX MT ELS TF 10 HT
mm black black black* black
DIN-Abbreviation PEEK PEEK GF 30 PEEK CF 30 PEEK PEEK PEEK CF PEEK TF 10 PEK
Density (g/cm3) 1,32 1,49 1,44 1,48 1,32 1,44 1,35 1,32
Diameter
Ø mm kg / m kg / m kg / m kg / m kg / m kg / m kg / m kg / m
5 +0,4 0,029 0,032 0,031 0,032 0,029 0,031 0,029 0,029
6 +0,1 0,040 0,046 0,044 0,045 0,040 0,044 0,041 0,040
8 0,071 0,081 0,078 0,080 0,071 0,078 0,073 0,071
+0,5
+0,5
9 0,090 0,098 0,098 0,090
+0,1
+0,1
10 0,110 0,124 0,120 0,123 0,110 0,120 0,112 0,11
11 0,14 0,15 0,151 0,14
12 0,16 0,18 0,18 0,18 0,16 0,178 0,17 0,16
13 0,19 0,19
14 +0,9 0,22 0,22
15 +0,2 0,25 0,28 0,27 0,28 0,25 0,27 0,26 0,25
16 0,28 0,32 0,31 0,32 0,28 0,31 0,29 0,28
18 0,36 0,40 0,39 0,40 0,36 0,39 0,36 0,36
19 0,40 0,45 0,43 0,44 0,40 0,43 0,40
20 +1,1 +0,2 0,44 0,50 0,48 0,50 0,44 0,48 0,45 0,44
22 0,53 0,60 0,58 0,60 0,53 0,58 0,55 0,53
25 +1,2 0,68 0,77 0,75 0,77 0,68 0,75 0,70 0,68
28 +0,2 0,85 0,96 0,93 0,96 0,85 0,93 0,87 0,85
30 0,98 1,10 1,07 1,10 0,98 1,07 1,00 0,98
32 +1,3 1,11 1,26 1,21 1,25 1,11 1,21 1,14 1,11
36 +0,2 1,40 1,58 1,53 1,57 1,40 1,53 1,43 1,40
40 +1,5 +0,2 1,73 1,95 1,89 1,94 1,73 1,89 1,77 1,73
45 +1,7 2,19 2,39 2,46 2,19 2,39 2,19
50 +0,3 2,70 3,04 2,94 3,02 2,70 2,94 2,76 2,70
56 +2,0 +0,3 3,39 3,69 3,80 3,39 3,69 3,39
60 +2,3 3,90 4,40 4,25 4,37 3,90 4,25 3,98 3,90
65 +0,3 4,56 5,14 4,66 4,56
70 +2,5 +0,3 5,29 5,97 5,77 5,93 5,29 5,77 5,41 5,29
80 +3,0 +0,4 6,92 7,81 7,55 7,76 6,92 7,55 7,08 6,92
90 +3,4 +0,5 8,77 9,89 9,56 9,83 9,56 8,96 8,77
100 +3,8 +0,6 10,83 12,22 11,81 12,14 10,83 11,81 11,07 10,83
110 +4,2 +0,7 13,11 13,11 13,11
120 +4,6 15,61 15,61 15,61
125 +0,8 16,91 16,91 16,91
TECAPEEK
135 +5,4 19,79 19,79 19,79
140 +0,9 21,24 21,24
150 +5,8 +1,0 24,40 24,40 24,40
165 +6,3 +1,1 29,50
180 +7,4 +1,2 35,21
200 +8,5 +1,3 43,53
*Also available in pigmented form. = Stock item
The specified kg/m weights are purely arithmetic figures.
Weight on delivery will deviate from the figures given = Non-stock item – special production
above. Stock lengths 3000 mm, other delivery lengths
possible, also available planed.
All figures given without obligation.
44

4. Plates Tolerance TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK TECAPEEK
to DIN GF 30 CF 30 PVX MT ELS TF 10 HT
(mm) black black black* black
DIN-Abbreviation PEEK PEEK GF 30 PEEK CF 30 PEEK PEEK PEEK CF PEEK TF 10 PEK
Density (g/cm3) 1,32 1,49 1,44 1,48 1,32 1,44 1,35 1,32
Size
mm kg / m kg / m kg / m kg / m kg / m kg / m kg / m kg / m
5 x 300 2,27 2,54 2,27 2,27
5 x 500 +0,7 3,70
6 x 300 +0,2 2,68 3,03 3,01 2,68 2,74 3,70
6 x 500 - 4,38 4,95 4,78 4,92 4,38 4,78 4,48 2,68
8 x 300 3,56 4,01 3,99 3,56 3,64 4,38
8 x 500 +0,9 5,81 6,56 6,34 6,52 5,81 6,34 5,94 3,56
10 x 300 +0,2 4,39 4,95 4,92 4,39 4,49 5,81
10 x 500 7,17 8,10 7,82 8,04 7,17 7,82 7,33 4,39
12 x 300 5,36 6,05 6,01 5,36 5,49 7,17
12 x 500 8,77 9,90 9,57 9,83 8,77 9,57 8,97 5,36
16 x 300 7,03 7,93 7,88 7,03 7,19 8,77
16 x 500 11,49 12,97 12,53 12,88 11,49 12,53 11,75 7,03
16 x 1000 ** 22,31
18 x 500 +1,5 12,85 14,50 14,02 14,41 12,85 14,02 13,14 11,49
20 x 300 +0,3 8,69 9,81 9,74 8,69 8,89 12,85
20 x 500 14,21 16,04 15,50 15,93 14,21 15,50 14,53 8,69
20 x 1000 ** 27,59
22 x 500 15,57 17,57 16,98 17,45 15,57 16,98 15,92 14,21
25 x 300 10,77 12,16 12,07 10,77 11,01 15,57
25 x 500 17,61 19,87 19,21 19,74 17,61 19,21 18,01 10,77
25 x 1000 ** 34,19
30 x 300 13,10 14,78 14,69 13,10 13,40 17,61
30 x 500 21,41 24,17 23,36 24,01 21,41 23,36 21,90 13,10
30 x 1000 ** 41,38
32 x 500 22,77 25,71 25,53 22,77 23,29 21,41
36 x 500 25,49 22,77
40 x 300 +2,5 17,26 19,48 18,82 19,35 17,26 18,82 17,65 25,49
40 x 500 +0,5 28,21 31,85 30,78 31,63 28,21 28,85 17,26
40 x 1000 ** 54,78
45 x 500 31,61 35,68 35,44 31,61 30,78 32,33 28,21
50 x 300 21,41 24,17 23,36 24,01 21,41 23,36 21,90 31,61
50 x 500 35,01 39,52 38,19 39,25 35,01 38,19 35,81 21,41
60 x 300 25,78 29,10 25,78 26,37 35,01
+3,5
TECAPEEK
60 x 500 42,15 47,26 42,15 25,78
+0,5
70 x 300 29,94 33,79 30,62 42,15
80 x 300 34,41 38,84 35,19
+5,0
80 x 500 54,62
+0,5
100 x 300 42,72
*Also available in pigmented form. = Stock item
The specified kg/m weights are purely arithmetic figures.
Weight on delivery will deviate from the figures given = Non-stock item – special production
above. Stock lengths 3000 mm, other delivery lengths
possible, also available planed.
All figures given without obligation.
45

5. Tubes TECAPEEK
DIN-Abbreviation PEEK
Density (g/cm3) 1,32
Tolerance to DIN -0,3 -0,3 -0,3 -0,5
mm -3,0 -3,9 -5,0 -5,0
Diameter 25 30 36 40 45 50 54 60 70 75
Ø (mm)
40 1,17
45 1,62
+2,5 50 2,13 1,85 1,44
+0,8 56 2,81 2,53 2,12 1,81
60 3,31 3,03 2,62 2,31
65 3,97 3,69 3,28 2,97 2,53
70 4,73 4,44 4,04 3,73 3,29 2,80
75 5,50 5,22 4,81 4,50 4,06 3,57 3,14
+3,0
80 6,04 5,30 4,98 4,88 4,39 3,96 3,26
+0,8
85 5,63 5,32 5,76 5,27 4,84 4,13
90 6,51 6,19 6,78 6,29 5,16 3,84
100 7,53 7,22 8,80 8,31 7,88 7,18 5,86 5,12
+3,6 110 9,55 9,24 11,03 10,54 10,11 9,40 8,09 7,34
+1,2 120 12,97 11,84 10,52 9,78
125 14,91 14,42 14,00 13,29 11,98 11,23 10,43
130 15,78 14,64 13,33 12,58
135 17,18 16,75 16,05 14,74
+4,5
140 18,64 18,21 17,51 16,19
+1,5
150 21,90 21,47 20,76 19,45
165
+5,4 180
+1,8 200
210
230
+6,0 250
+2,0 280
300
360
25 30 36 40 45 50 54 60 70 75
TECAPEEK
= Outside = Stock item
= Inside = Non-stock item – special production
The specified kg/m weights are purely arithmetic figures. Weight on delivery will deviate from
the figures given above. Stock lengths 3000 mm, other delivery lengths possible, also available
ground. All figures given without obligation.
46

6. -0,5 -2,5 Tolerance
-8,5 -8,5
80 90 100 110 125 130 150 175 180 200 290 Diameter
Ø mm
40
45
50
56
60
65
70
75
80
85
90
4,32 100
6,55 4,79 110
8,98 7,23 5,27 120
10,43 8,68 6,72 125
11,79 10,03 8,07 130
13,19 11,44 9,48 7,31 135
14,65 12,90 10,94 8,77 140
17,91 16,15 14,20 12,03 8,39 7,07 11,78 150
22,92 21,17 19,21 17,04 13,40 12,08 19,80 165
28,39 26,64 24,68 22,52 18,88 17,56 24,31 180
36,42 34,67 32,71 30,54 26,91 25,59 33,60 12,13 200
37,21 35,05 31,41 30,09 43,71 16,63 210
46,50 44,34 40,70 60,45 24,1 16,33 230
56,62 54,45 50,82 72,64 34,22 26,45 250
50,95 43,18 280
63,15 55,37 300
51,67 360
80 90 100 110 125 130 150 175 180 200 290
TECAPEEK
47

7. Tubes TECAPEEK
PVX
black
DIN-Abbreviation PEEK
Density (g/cm3) 1,48
Tolerance to DIN -0,3 -0,3 -0,3 -0,5 -0,5
mm -3,0 -3,9 -5,0 -5,0 -5,0
Diameter 25 30 32 36 40 45 50 54 60 70
Ø (mm)
40 1,37
45 1,88
+2,5 50 2,45 2,17 1,73
+0,8 56 3,22 2,93 2,49
60 3,77 3,48 3,35 3,05 2,71
65 4,23 3,79 3,45 3,02
70 5,07 4,94 4,64 4,3 3,87 3,4
75 5,8 5,5 5,16 4,73 4,27 3,81
+3,0
78 6,05 5,71 5,28 4,81
+0,8
80 6,43 6,09 5,66 5,19 4,73 3,97
85 7,07 6,64 6,17 5,71 4,95
90 7,78 7,32 6,1 4,67
+3,6
100 9,58 9,12 8,37 6,93
+1,2
110 12,08 11,62 10,86 9,43
120 14,81 13,59 12,16
125 16,44 15,98 15,22 13,79
130
+4,5
135
+1,5
140
150
+5,4 165
+1,8 180
185
200
+6,0
210
+2,0
230
250
25 30 32 36 40 45 50 54 60 70
= Outside = Stock item
TECAPEEK
= Inside = Non-stock item – special production
The specified kg/m weights are purely arithmetic figures. Weight on delivery will deviate from
the figures given above. Stock lengths 3000 mm, other delivery lengths possible, also available
ground. All figures given without obligation.
48

8. -0,5 -0,5 -0,5 -2,5 Tolerance
-5,0 -5,8 -5,8 -8,5
75 80 90 100 110 125 130 150 175 180 200 Diameter
Ø (mm)
40
45
50
56
60
65
70
75
78
80
85
90
6,12 5,25 100
8,62 7,75 5,84 110
11,35 10,48 8,57 6,51 120
12,98 12,11 10,2 8,14 125
14,49 13,62 11,71 9,66 130
15,2 13,29 11,23 9,2 135
16,83 14,92 12,87 10,83 140
20,33 18,41 16,36 14,33 10,39 8,96 150
22,14 20,1 16,16 14,73 165
28,28 26,25 22,3 20,88 14,57 180
16,91 185
35,44 31,5 30,07 23,77 14,98 200
34,92 28,62 210
39,04 28,25 19,67 230
50,38 39,6 31,02 250
75 80 90 100 110 125 130 150 175 180 200
TECAPEEK
49

9. TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
VE
SIN L® S
TE
TE
TE
TE
TE
TE
TE
TE
TE
TE
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
CA
SP
TIM P1
TR
E
FL
FL
MI
MI
MI
RI M
NA
FIN
DU MP
FO
FO
F I N AD
FIN P
RA E
NY
PE
PE
PE
SO
SO
SO
FL
FL
ID
ON
ON
ON
ON DF
ON
D6
D4
D1 6
EK
EK
I
RM
RM
N
T
L
N
N
N
RP
EP
EP
EP
E
P
S
AB
6,
1,
HT
PT
ET
PV
PC
ET
AH
6
12
S
FE
FE
,P
TF
BT
E
Cupric sulphate 10% + + + + + + + + + + + + - + + + +
Linseed oil + + + + + + + + + + + + + + + + +
Methanol + + + (+) + + + + + + (+) + - + + + + + + (+) +
Methyl ethyl ketone + + + + + - (+) - + + (+) (+) + + + + - (+) + (+) + + + - -
Methylene chloride + - - - + + + (+) (+) (+) - - + - (+) (+) - (+) -
Milk + + + + + + + + + + + + + + + +
Lactic acid, aqueous solution 90% + + (+) + + - - (+) + + - + + - -
Lactic acid, aqueous solution 10% + + + + + + + + + + + + (+) + + + +
Sodium bisulphite, aqueous solution 10% + + + + + + + + + + + + + - - + + +
Sodium carbonate, aqueous solution 10% (+) + + + + + + + + + + + + + (+) + + + +
Sodium chloride, aqueous solution 10% + + + + + + + + + + + + + + + + + + + + + + + +
Sodium nitrate, aqueous solution 10% + + + + + + + + + + + + + +
Sodium thiosulphate 10% + + + + + + + + + + + +
Soda Iye, aqueous 50% - + + - + + + + + + + + - + - + - + + + +
Soda Iye, aqueous 5% (+) + + + + + + + + + + - + + - + + +
Nitrobenzene + - + + (+) (+) (+) - + (+) (+) + + -
Oxalic acid, aqueous solution 10% (+) + + + + + + + + (+) (+) + + + - (+) + + + +
Ozone 2) (+) + + + - - - - - - (+)
Paraffin oil + + + + + + + + + + + + + + + + + +
Perchlorethylene + - - + + (+) (+) - (+) (+) + + - - (+)
Petroleum + + + + + + + - + + + + + (+) +
Phenol, aqueous solution + + + + + - - - - + - - - + + (+)
Phosphoric acid, concentrated (+) + + + + + + + - - - - + + + +
Phosphoric acid, aqueous solution 10% - (+) + + + + + - - - - + + (+) - + +
Propanol + + + + + - + + + + + + + +
Pyridine - - - + + + + + + - (+) + (+) (+) (+) -
Pyridine 3 solution, aqueous solution + + + + - + -
Salicylc acid + + + + + + + + (+) +
Nitric acid, aqueous solution 2% + + + - + + + + + + + + - - - - - + + - - + + + -
Hydrochloric acid, aqueous solution 36% - + + + + (+) + + + - - - - + + - - - + + + +
Hydrochloric acid, aqueous solution 2% + + + + + + + + + + + - - (+) + + + - - + + + +
Sulphur dioxide + (+) + + + + + + - + + + + (+) -
Sulphuric acid, concentrated 98% - - - - - - + + (+) + - - - - - + - - - + (+) - -
Sulphuric acid, aqueous solution 2% + + + + + + + + + + + + - - - + + - + - + + + +
Hydrogen sulphide, saturated + + + + + + + (+) + - + + - +
Soap solution, aqueous solution - (+) + + + + + + + + + + + + + + +
Silicone oils + + + + + + + + + + + + + + + + +
Soda solution, aqueous solution 10% (+) + + + + + + + + + + + +
Edible fats, Edible oils + + + + + + + + + + + + + +
Styrene + + + + + + - + (+) (+) -
Tar + + + + + (+) (+) (+) + +
Carbon tetrachloride + + (+) + + + + + - + - + + (+) - - - -
Tetrahydrofurane + + + - + + + + + + + - - - (+) - (+) (+) -
Tetralin + + + + + - + + + - (+) -
Ink + + + + + + + + + + + +
Toluene + + + + (+) - (+) - + + + (+) + + + + - - (+) + + + (+) -
Transformer oil + + + + + + + + + + + (+) + + + (+) + +
Triethanolamine - + + + + + - + - + + +
Trichlorethylene + + + - - + + - (+) (+) (+) - - - - - (+) - - -
Trilon B, aqueous solution 10% + + + + +
TECHNICAL
Vaseline + + + + + + + + + + + + + + + (+) +
Wax, molten + + + + + + + + + + + + + + + + (+) (+) +
Water, cold + + + + + + + + + + + + + + + + + + + + + + + + +
Water, warm - + + - (+) (+) (+) + + + (+) (+) (+) (+) (+) + - (+) - + + + +
Hydrogen peroxide, aqueous solution 30% - (+) (+) + (+) + + + + - - - - + + - - + + +
Hydrogen peroxide, aqueous solution 0,5% + + + + + + + - - - - + + + (+) + + + +
Wine, Brandy + + + + + + + + + + + + + + + +
Tartaric acid + + + + + + + + + + (+) (+) + + + +
Xylene + + + + + (+) + - + + (+) + + (+) - - (+) + + - - - -
Zink chloride, aqueous solution 10% + + + + + + + + + + (+) (+) (+) + + - + + + +
+ = Resistant (+) = Limited resistance - = Not resistant (also dependent on concentration, time and temperature)
75

10. Mechanical properties
0,
24
), 2
(r D
ENSINGER High-temperature plastics.
/2 TM
6,
, 25
39 S
20 D: A
nd =
21 D
)) 8,
st
ou v
t
)) 7 TM
(a 3
gr 2
es
te
st ptu th: rpy:ISO (s) , ISO re
Material standard values.
A AS 08 D 6
d m
h
(k 1 S
7) t
o
9
8) al
))
6 SO : A
an /m
ith ru ren Cha EN 456785 , Sh
08 8,
0
e
(a
17 ur
00
52 l
17 M
17 63
45 I d
si
d 5N
)
lo tre 53 EN, Izo
43 D 9/1
O ex
7)
D ST
O n
r1
D D
IS r te
52
en ,0
IN M 3
IS r fl
M (A
IN IN 9
te
D T 20
M M
D D 17
rd = 0
9)
O
af
EN fte
EN fte
ST T
), S O
ST k
EN ld
IS
)
47
A rea
(a : A S
us
h
h
ha p
IN a
IN a
5 l I
r 1 1%
IN ie
gt
el :
0
l, n
78 w on
7, k (
D ity
ity
io
53
7, b
D y
00
ee io
ad n
ev
D ck tati
te r
8, at
52 at
52 ea
8, tic
0, tic
st i), IN
af fo
st rict
IN
pr
ct 0 ( (D
TM), R en
O br
g
63 th
on SO th
63 as
79 as
D
D
ic s
n it
on f f
Im : AS (d ind
o
pa 18 ce
as
lim
D ng
ng
at re
D el
D el
2,
IS at
/s t o
im O n
79
M tre
EN tre
l
M of
of
h IS ta
ns
rs 05 al
EN n
ga ld
m n
tc N sis
io
Co tio
he 3 5 (b
D
tio
ST us
ST us
6 ie
ST s
IN s
I
on ie
IN t
ST y
no E re
ot 5 ss
(A sile
D ile
0, fic
D ga
M
M
el y
(A sit
(A ul
(A ul
di
w ep
IN e
IN t
(c ar
e
D pac
D rdn
ns
ef
od
od
on
en
m
n
e
e
Te
Te
Cr
W
a
M
M
El
Ti
D
H
Works- DIN- additives Service EZ EB HK an µ V Works-
and/or temperature S R R B/1000 1/1000
nomenclature abbreviation g/cm3 MPa MPa % MPa MPa MPa kJ/m2 MPa MPa – µ/km nomenclature
colour °C long term
SINTIMID SINTIMID
PI black 300 1,34 116 9 4000 4000 75 12 0,8
PUR HT PUR HT
SINTIMID SINTIMID
PI CS 15 15% graphite, black 300 1,42 97 2,8 4000 4000 88(d) 26(i) 0,27
15G 15G
SINTIMID SINTIMID
PI CS 40 40% graphite, black 300 1,57 65 2,2 80(d)
40G 40G
SINTIMID 15% graphite, 10% SINTIMID
PI CS 15 TF 10 300 1,48 77 2,9 85(d)
PVX PTFE, black PVX
SINTIMID SINTIMID
PI PTFE 30 30% PTFE 260 1,51 82 4,1 84(d)
30P 30P
SINTIMID SINTIMID
PTFE + PI Polyimid P84, brown 260 1,85 15 200 65(d)
8000 8000
TECAPEEK TECAPEEK
PEK 260 1,3 2110 20 3800 4100 108(r) .
HT HT
TECAPEEK PEEK also in black** 260 1,32 95 25 3000 4100 M99 o. Br. 0,30-0,38 TECAPEEK
TECAPEEK TECAPEEK
PEEK GF 30 30% glass fibre 260 1,49 180 2,5 9500 10000 M103 60 36 0,38-0,46
GF 30 GF 30
TECAPEEK 30% carbon fibre, TECAPEEK
PEEK CF 30 260 1,40 215 1,5 18500 20000 255 35
CF 30 black CF 30
TECAPEEK 10% carbon fibre, TECAPEEK
PEEK 260 1,48 130 1,5 9500 8100 208 30 0,11
PVX PTFE, graphite, black PVX
TECAPEEK TECAPEEK
PEEK coloured 260 1,32 95 20 3000 4100 M99(r) o. Br. 0,30-0,38
MT MT
TECAPEEK TECAPEEK
PEEK black 260 1,32 95 20 3000 4100 M99(r) o. Br. 0,30-0,38
MT sw MT sw
TECAPEEK TECAPEEK
PEEK CF carbon fibre, black 260 1,44 175 1 15500 M105 30
ELS ELS
TECAPEEK TECAPEEK
PEEK TF 10 PTFE 260 1,35 80 15 3000 n. b.
TF 10 TF 10
TECAFLON TECAFLON
PTFE 260 2,18 25 > 50 700 30 o. Br. 5 1,58 0,08-0,10 21
PTFE PTFE
TECATRON PPS 230 1,35 75 4 3700 3600 190 50 TECATRON
TECATRON TECATRON
PPS black 230 1,35 75 4 3700 3600 190 50
MT sw MT sw
TECATRON TECATRON
PPS GF 40 40% glass fibre 230 1,65 185 1,9 14000 13000 320 45
GF 40 GF 40
TECATRON 10% carbon fibre, TECATRON
PPS 230 1,54 115 1,5 10000 203 20 0,21 0,69
PVX PTFE, graphite, black PVX
TECASON TECASON
PES translucent 180 1,37 90 40 2700 148 o. Br. 20
E E
TECASON TECASON
PPSU black 170 1,29 70 > 50 2350 2600 31 o. Br.(k)
P P
TECASON TECASON
PPSU black 170 1,29 70 > 50 2350 2600 31 o. Br.
P MT sw P MT sw
TECAPEI PEI translucent 170 1,27 105 > 50 3200 3300 140 4 TECAPEI
TECAPEI TECAPEI
PEI GF 30 30% glass fibre 170 1,51 165 2 9500 9000 165 40
GF 30 GF 30
TECAPEI TECAPEI
PEI coloured 170 1,27 105 3200 3300 140 4
MT MT
TECASON TECASON
PSU translucent 160 1,24 80 > 50 2600 147 o. Br. 42 22 0,4
S S
TECAFLON TECAFLON
E/TFE 150 1,73 45 40 800 60(d) o. Br. 0,4
TECHNICAL
ETFE ETFE
DATA
TECAFLON TECAFLON
PVDF 150 1,77 50 > 30 2000 2000 80 o. Br. 34 3 0,3
PVDF PVDF
TECAFLON 8% carbon fibre, TECAFLON
PVDF CF 8 150 1,78 93 1 6000 6000 0,23
PVDF CF 8 black PVDF CF 8
The information corresponds with current knowledge, and indicates our pro- Tests are carried out in a standard atmosphere of 23° C 50 RH according to DIN
ducts and possible applications. We cannot give you a legally binding guaran- 50 014.
tee of the physical properties or the suitability for a specific application. We reserve the right to make technical alterations.
Existing commercial patents are to be taken into account. A definite quality
guarantee is given in our general conditions of sale.
76