1. 1

2. 2

3. Introduction
Desktop
with PCI 802.11 LAN card
Network
connectivity
to the
legacy Access Point Laptop
wired LAN with PCMCIA 802.11 LAN card
Provides network connectivity over wireless media
An Access Point (AP) is installed to act as Bridge between
Wireless and Wired Network
The AP is connected to wired network and is equipped
with antennae to provide wireless connectivity
3

4. LAN Technologies
Range ( Distance between Access Point and WLAN client)
depends on structural hindrances and RF gain of the
antenna at the Access Point
To service larger areas, multiple APs may be installed with
a 20-30% overlap
A client is always associated with one AP and when the
client moves closer to another AP, it associates with the
new AP (Hand-Off)
Three flavors:
802.11b
802.11a
802.11g 4

5. • Difficult media Difficult media
–interference and noise
–quality varies over space and time
–shared with Unwanted 802.11 devices
–shared with non-802 devices (unlicensed spectrum: microwave
ovens, microwave ovens, bluetooth bluetooth, etc., , etc.,)
•Full connectivity cannot be assumed
–Hidden node problem Hidden node problem
•Multipinternational regulatory requirements
•Mobility
–variation in link reliability
–batteryusage: requires power management
–want seamlessconnections
.Power management
•Security
–no physical boundaries
5

6. 1.802.11 a
2.802.11b
3.802.11g
6

7.  The bit rate for the original IEEE 802.11 standard is
2 Mbps using the FHSS transmission scheme and the
S-Band Industrial, Scientific, and Medical (ISM)
frequency band, which operates in the frequency range
of 2.4 to 2.5 GHz. However, under less-than-ideal
conditions, a lower bit rate speed of 1 Mbps is used.
7

8. IEEE 802.11a (the first standard to be ratified, but just now
being widely sold and deployed) operates at a bit rate as high
as 54 Mbps and uses the C-Band ISM, which operates in the
frequency range of 5.725 to 5.875 GHz. Instead of
DSSS, 802.11a uses OFDM, which allows data to be
transmitted by subfrequencies in parallel and provides greater
resistance to interference and greater throughput. This higher-
speed technology enables wireless LAN networking to perform
better for video and conferencing applications.
8

9. The major enhancement to IEEE 802.11 by IEEE 802.11b is the
standardization of the physical layer to support higher bit rates. IEEE
802.11b supports two additional speeds, 5.5 Mbps and 11 Mbps, using the
S-Band ISM. The DSSS transmission scheme is used in order to provide the
higher bit rates. The bit rate of 11 Mbps is achievable in ideal conditions. In
less-than-ideal conditions, the slower speeds of 5.5 Mbps, 2 Mbps, and 1
Mbps are used.
Note
802.11b uses the same frequency band as that used by microwave
ovens, cordless phones, baby monitors, wireless video cameras, and
Bluetooth devices.
9

10. IEEE 802.11g operates at a bit rate as high as 54 Mbps, but uses the S-Band
ISM and OFDM. 802.11g is also backward-compatible with 802.11b and
can operate at the 802.11b bit rates and use DSSS. 802.11g wireless
network adapters can connect to an 802.11b wireless AP, and 802.11b
wireless network adapters can connect to an 802.11g wireless AP. Thus,
802.11g provides a migration path for 802.11b networks to a frequency-
compatible standard technology with a higher bit rate. Existing 802.11b
wireless network adapters cannot be upgraded to 802.11g by updating the
firmware of the adapter — they must be replaced. Unlike migrating from
802.11b to 802.11a (in which all the network adapters in both the wireless
clients and the wireless APs must be replaced at the same time), migrating
from 802.11b to 802.11g can be done incrementally.
Like 802.11a, 802.11g uses 54 Mbps in ideal conditions and the slower
speeds of 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, and 6 Mbps in
less-than-ideal conditions
10

11.  The IEEE 802.11 protocol is a network access technology for providing
connectivity between wireless stations and wired networking
infrastructures.
 By deploying the IEEE 802.11 protocol and associated technologies, you
enable the mobile user to travel to various places — meeting rooms,
hallways, lobbies, cafeterias, classrooms, and so forth — and still have
access to networked data. Also, beyond the corporate workplace, you
enable access to the Internet and even corporate sites can be made available
through public wireless ―hot spot‖ networks. Airports, restaurants, rail
stations, and common areas throughout cities can be configured to provide
this service.
 This section provides an in-depth view of how IEEE 802.11 works,
including the architecture, related protocols, and technologies.
11

12. 12

13. 13

14.  Doctors and nurses in hospitals are more productive because hand-held or notebook
computers with wireless LAN capability deliver patient information instantly.
 Consulting or accounting audit engagement teams or small workgroups increase
productivity with quick network setup.
 Network managers in dynamic environments minimize the overhead of moves, adds, and
changes with wireless LANs, thereby reducing the cost of LAN ownership.
 Training sites at corporations and students at universities use wireless connectivity to
facilitate access to information, information exchanges, and learning.
 Network managers installing networked computers in older buildings find that wireless
LANs are a cost-effective network infrastructure solution.
 Retail store owners use wireless networks to simply frequent network reconfiguration.
 Trade show and branch office workers minimize setup requirements by installing
preconfigured wireless LANs needing no local MIS support.
 Warehouse workers use wireless LANs to exchange information with central databases and
increase their productivity.
 Network managers implement wireless LANs to provide backup for mission-critical
applications running on wired networks.
 Senior executives in conference rooms make quicker decisions because they have real-time
information at their fingertips.
14

15.  Mobility-Wireless LAN systems can provide LAN users with access to real-
time information anywhere in their organization. This mobility supports
productivity and service opportunities not possible with wired networks.
 Installation Speed and Simplicity-Installing a wireless LAN system can be fast
and easy and can eliminate the need to pull cable through walls and ceilings.
 Installation Flexibility-Wireless technology allows the network to go where
wire cannot go.
 Reduced Cost-of-Ownership-While the initial investment required for wireless
LAN hardware can be higher than the cost of wired LAN hardware, overall
installation expenses and life-cycle costs can be significantly lower. Long-term
cost benefits are greatest in dynamic environments requiring frequent
moves, adds, and changes.
 Scalability-Wireless LAN systems can be configured in a variety of topologies
to meet the needs of specific applications and installations. Configurations are
easily changed and range from peer-to-peer networks suitable for a small
number of users to full infrastructure networks of thousands of users that allows
roaming over a broad area.
15

16. 16