Question: OBD Abritus cottages. Ezs programmer, What is the procedure for what to do first? Answer: do dash and ezs manually and job done. or you can do only dash by obd with breaking of the com between IC and EZS. I have done all manually with xprog. its similar as w169 Be aware: Take a look in Ezs with MB Star or any Diag tool. ezs only show 1.7xxxxxxkm if you change mileage in ezs. if you do only dash Original mileage stay in ezs device only break sync between dash and ezs Question two: Real mileage is not shown in Ezs. Perhaps a new Ezs ( or Virgin dump)…solve problem…??? I post my dump here: EZS w245 1695451908 04156921 3028074331406141 Real mileage is about 165k km Working solution advised: Write EIS dump i post, disconnect ELV , write correct value in dashboard, connect EIS and dashboard , activate the keys ( by insert them ) connect ELV, done. With this solution EZS will has the same value as in dash, is not a trick I have renew the EIS , it’s “virgin” mode , that’s mean no KM values no VIN (VIN can be written with DAS as well ) I made this procedure more than 50 times till now. Every time working great Finally solved With the advised solution: All is working like a charm. real mileage is shown in Ezs. Every key was inserted 15 seconds, then they are automatically recognized, as you said mileage is Ok, and VIN is virgin….it can be written with MB STAR DAS.  http://www.mbstarshop.com/wholesale/best-quality-mb-star-c3-diagnosis-pro-trucks-cars.html Today I have learnt that nothing is impossible. It is just to find correct answer !!! I got the answer from an experienced technician, and writing Ezs in Virgin mode is the solution. BTW, I praise him genius, he said modestly he is not genius, i just have expensive tools … name of the tool he has: MI , Necpro, DS and many other. Mercedes

1. Guide: Mercedes B-class W245
EZS programmer and OBD
Abritus cottages
Question:
OBD Abritus cottages. Ezs programmer, What is the procedure for what to do
first?
Answer:
do dash and ezs manually and job done.
or you can do only dash by obd with breaking of the com between IC and
EZS.
I have done all manually with xprog.
its similar as w169
Be aware:
Take a look in Ezs with MB Star or any Diag tool.
ezs only show 1.7xxxxxxkm if you change mileage in ezs.
if you do only dash Original mileage stay in ezs
device only break sync between dash and ezs
Question two:
Real mileage is not shown in Ezs. Perhaps a new Ezs ( or Virgin dump)…
solve problem…???

2. I post my dump here:
EZS w245
1695451908
04156921
3028074331406141
Real mileage is about 165k km
Working solution advised:
Write EIS dump i post, disconnect ELV , write correct value in dashboard,
connect EIS and dashboard , activate the keys ( by insert them ) connect
ELV, done.
With this solution EZS will has the same value as in dash, is not a trick I have
renew the EIS , it’s “virgin” mode , that’s mean no KM values no VIN (VIN can
be written with DAS as well )
I made this procedure more than 50 times till now. Every time working great
Finally solved With the advised solution:
All is working like a charm. real mileage is shown in Ezs.
Every key was inserted 15 seconds, then they are automatically recognized,
as you said mileage is Ok, and VIN is virgin….it can be written with MB STAR
DAS.
http://www.mbstarshop.com/wholesale/best-quality-mb-star-c3-diagnosis-
pro-trucks-cars.html

3. Today I have learnt that nothing is impossible. It is just to find correct
answer !!! I got the answer from an experienced technician, and writing Ezs in
Virgin mode is the solution.
BTW, I praise him genius, he said modestly he is not genius, i just have
expensive tools …
name of the tool he has: MI , Necpro, DS and many other.
Mercedes