1. VOLUME 2
DESIGN AND MANUFACTURING OF
HYDRAULIC CYLINDERS
Q.S. Khan
B.E. (Mech.)
TANVEER PUBLICATIONS
Hydro-Electic Machinery Premises
12-A, Ram-Rahim Uduog Nagar, Bus Stop Lane, L.B.S. Marg,
Sonapur, Bhandup (west), Mumbai - 400 078 (India)
E-mail: hydelect@vsnl.com
www. Tanveerpublication.com
Tel : 022-25965930,25964075-8108000222
2. Introduction to Hydraulic Cylinder 8.1 to 8.6
8.1 Definition types of Hydraulic cylinder
8.1.1 Components of Hydraulic Cylinder
8.2 Classification of Hydraulic Cylinder 8.6 to 8.19
8.2.1 Classification based on body construction of hydraulic cylinder
8.3 Classification based on operating feature of Hydraulic cylinder
8.4 Design of Hydraulic Cylinder 8.20 to 8.51
8.4.1. Importance of Safe Design
8.4.2. Design of Cylinder tube
8.4.3. Capacity Hydraulic Cylinder
8.4.4. Working Pressure
8.4.5. Theoretical Design of main shell or Cylinder tube
8.4.6. Design of thin Cylinder
8.3.7. Thin Spherical Shells
8.4.8. Design of thick Cylinder
8.4.9. Design of Cylinder End-plug (Cover plate)
8.4.10. Practical way of Seletion of Cylinder tube
8.4.11. Inside diameter of Cylinder as per isi standard
8.4.12. ID of Cylinder as per preferred number
8.4.13. ID of Cylinder as per availability of seamless pipe
8.4.14. ID of Cylinder as per Seal
8.4.15. Manufacturing of Cylinder tube
8.5. Piston Rod
8.5.1. Piston
8.6. Guide-Bush
8.7. Gland-Bush
8.8. End-Plug
8.9. Flanges Welded to Cylinder-Tube
8.10. Seal Plates
8.11. Cylinder Cushions
CONTENTS