2. z
Contents
• Green Housing Purposes
• Project details
• Site and Design
• Elements of Design
• SUN
• Air
• Water
• Earth
• Solar Energy
• Building Materials
3. z
Learning Outcomes
• To learn the Application of Green Energy Housing systems in Practical.
• To learn the requirements for a green housing system.
• To learn the direction of Sunlight, Air and Water system in an energy
efficient buildings.
• To learn the building materials for a green housings and its sources.
4. z
Uses less energy, water, natural resources
Generates less waste
Healthier for people living in it
Energy saved= 30-40% per day
Enhanced indoor air quality, light and ventilation
Potable water saving upto 20-30%
High productivity of occupants
Minimum generation of non-degradable waste
Lower operating costs and increase asset value
Green Housing Purposes
5. z
The Energy and resources institute earlier known
as Tata Energy Resources Institute
Project details
Site location
Site includes
: 30 km south of Delhi, in northern Haryana at GUAL PAHARI
: Forestry , Micro propagation technology park (MTP) , Patchy greens, Retreat centre ,
Golf range , Golf Course
Site area
Climate
Building type
Architects
: 36 hectares
: Composite
: Institutional
: Sanjay Prakash and Teri
Year of start/completion :1997–2000
Cost of the project Civil works : Rs 23.6 million; Electrical works - Rs 2.5 million
Cost of various technologies : Rs 18.54 million
"Sustainability was the back bone of the entire design concept and it was communicated to the architect
that the building should incorporate all possible elements of Passive Solar Architecture and Low Energy
Cooling systems" says Mili Majumdar.
6.
7. z
GEOMETRY OF THE BLOCK
•The north block is made slightly
concave towards the front. South
forms a hybrid convex surface
facing the winter sun.
•The point of the south block
broadly falls on the surface of
large imaginary cones that
generated the slightly free
geometry & this allow the
architecture to break away the
grid iron apporach normally
associated with solar
architecture.
8. Site and Design
• The linear geometry of the site with a narrow frontage and an aspect ratio of almost 1:3 dictated the strong
linear axis in the design.
• The logical sequence of positioning the three distinct functioning zones in a hierarchy of public access to restricted
entry formed the other key consideration in design development.
• Placing the commercial block at the front was the most logical choice in exploiting the commercial potential of
the frontage of the site.
• The functional core also coincides with the geometric central part of the linear site. The residential zone comes
up from the rear forming the last zone in the linearsequence.
• That the design responds to orientation and climatic factors, is but an obvious fact.
• The north line is at a slight angle to the linear axis of the site and the design takes full advantage of this orientation
in the composition of the built and open spaces and in creating wind flows through the complex as also lighting
and shading of the spaces.
Site Plan and Ground Floor Layout (bottom)
1 Commercial Block, 2 Classrooms, 3, 4 Laboratories, 5,6 administrative block, 6
accounts, 7 dining hall, 8 hostel, 9, 10, courts, 11 Open AirTheatre
9. Elements of Design
The Sun, Sky, Air, Water and Earth shape the nature of architecture which emerges on this site. The process of continuous
dialogue between the architect and TERI and the engagement of TERI in the design process augmented the thrust on
climate responsive design in a large way.
10. SUN
• Passive solar design is an important feature in the design of this
building.
• The planning and orientation of spaces and building blocks ensures
glare free daylight in all regularly occupied spaces.
• All the linear blocks are oriented in the East-West direction with
shorter facades facing the sun.
• Most of the south west facing walls are kept blank in order to protect
the building from the harsh south west solar radiations.
• Where the south west walls have openings, they are protected by
means of pergolas or projecting balconies.
• The east, west and south facades of the building have minimum
glazing
11. Air
• The predominant wind direction is taken into account in
designing the open spaces.
• The central atrium acts as an air funnel defined by the other
buildings.
• The opening oriented in the prevailing wind direction
catches the outside air and channelizes it through a narrow
stretch of the block before releasing it into the central court
area.
• The architect's experience of design in hot dry areas,
particularly in earlier projects in Hyderabad made him
confident of the effectiveness of this design feature in
cooling the ambient temperatures of the enclosed areas.
• The central atrium is also proposed to be covered with an
automatic adjustable louvers system (Vergola).
• The angle of the louvers can be adjusted to block the solar
radiations during summer and to allow ample sunlight during
winter.
• The system is further proposed to be integrated with photo
voltaic panels.
• The louvers if kept closed can effectively prevent rain water
from entering the atrium during the rainy season.
12. Sky
• Maximum use of daylight and use of light sensors to regulate the use of
artificial lighting in the interiors is another key design strategy.
• In areas where daylight is available, fixtures have been fitted with continuous
dimming electronic ballasts.
• These fixtures are controlled by light sensors which respond to available light
conditions and automatically regulate the connected fixtures to achieve the
desired level of uniform illumination required.
• In areas with non- uniform illumination, occupancy sensors that can turn off
the lights when the space is unoccupied have been installed.
• This kind of a lighting system has a potential of saving 70% lighting energy
demand.
• Use of efficient double glazing window units help significantly reduce the heat
gained through window glazing in the summers and the heat lost in the winters
without compromising on the day lighting integration and the levels of visual
comfort.
13. z
Water
• Water and waste management systems are important features of the building
design.
• All buildings in the campus have been provided with low flow fixtures such as
dual flush toilets, low flow taps and sensor taps that result in 25% savings in
water use.
• The waste water generated from the hostel block is treated through efficient
biological processes using a combination of micro organisms and bio-media
filter.
• This treatment system requires less area and low energy.
• The treated water meets the prescribed standards for landscape irrigation.
Rainwater harvesting is also an important concept which contributes to
efficient water management.
• The average annual rainfall of Delhi is 611mm.
• Rainwater run off from the roof and the site are tapped to recharge the
aquifer.
• This enhances the sustainable yield in areas where over development has
depleted the aquifer.
• The excess surface water is also conserved and stored for future
requirements. The quality of existing ground water is also improved through
dilution.
D E T A I L S O F R E C H A R G E T R E N C H C U M B O R E V V E L L
14. Earth
• The campus is equipped with three types of cooling systems (i)Variable Refrigerant Volume
system (VRV), (ii) Earth Air Tunnel (EAT) and (iii) Thermal Mass Storage
• The VRV system is proposed for the peripheral commercial block and the administrative
block of the institute.
• This state-of-the-art air conditioning system, which is similar to a split AC is highly efficient
under partial loading conditions and beneficial to areas with varying occupancy. It allows
customized control of individual zones eliminating the use of chilled water piping, ducting
and plant room.
• The use of Earth Air Tunnel gives an energy saving of nearly 50% as compared to the
conventional system
• Thermal mass storage used for cooling the classrooms and labs involves storing energy when
available and using it when required. Here, cooling of thermal mass is done during night.
• This cool thermal mass is used to cool air in day time. This system gives an energy saving of
up to 40%
15. z
BASIC DESIGN VECTORS
• SolarEnergy
• Tointegrate functionality of building with energy applications.
•Tominimize energy demand in the building through architectural intervention. (eg. Passive concepts such as solar
radiation, lattice work for shading, insulation and landscaping).
• Tomeet the space conditioning and lighting demands through
energy efficient system.
•Tomeet the electric energy demands using renewable energy sources
Solar lights used in gardens Solar street lights
16. z
DESIGN FEATURES
•Building Materials
• Roof insulated with vermiculite concrete and china mosaic white finish.
• Insulated walls using expanded polystyrene insulation.
Vermiculite concrete China mosaic white finish polystyrene insulation skylights
•Shading devices and fenestration have been designed to cut off summer
sun & let in winter sun.
• Glare free day lights used through specially designed skylights.
17. • Building designed as such wind direction can be redirected.
• Deciduous trees used in the south to shade the building in summers.
• in winters these shed their leaves thus letting in winter sun
• Building oriented along east west axis so as to have maximum exposure
along north-south.
• South side partially sunk into ground to reduce heat gains and loses.
• East and west devoid of opening are shaded