3. • To extract the oil from Cucurbita moschata Decne seeds • To produce liquid soap from Cucurbita moschata Decne seed oil • To test the quality of liquid soap Objective
4. Experiments 1. Extraction of the oil from Cucurbita moschata Decne seeds by Soxhlet extractor 3. Test the quality of liquid soap 2. Production of liquid soap Measure the foam capacity Measure the pH value Test the ability of emulsifying paraffin oil Studying the reaction of liquid soap with Ca 2+ , Mg 2+ and Fe 3+ Studying the reaction of liquid soap with inorganic acid Measuring the satisfaction of using the liquid soap Experiments
6. Results Table 1. Show the character and quantity of Cucurbita moschata Decne seed oil The oil is liquid and quite sticky. It has green-brown colors 235.8 770 picture Physical characteristic of the oil Quantity of the oil ( ml ) Weight of the seeds (g)
7. 2. Production of liquid soap Oils Dissolve KOH in water The oils were mixed from the formulas
8. Table 2. Show the ratio of Cucurbita moschata Decne seed oil to other oils that used to produce liquid soap ( % by mass ) 2. Production of liquid soap 100 - - 50 50 - 40 30 30 Pumpkin seed oil - 100 - 50 - 50 30 40 30 Palm oil - - 100 - 50 50 30 30 40 Coconut oil 9 8 7 6 5 4 3 2 1 formula Oils
10. Measure the foam capacity Measure the pH value Test the ability of emulsifying paraffin oil Studying the reaction of liquid soap with Ca 2+ , Mg 2+ and Fe 3+ Studying the reaction of liquid soap with inorganic acid Measure the satisfactions by using liquid soaps 3. Test the quality of liquid soap 3. Test the quality of liquid soap
11. Weighed liquid soap from each formula 5 g Dissolve in 50 ml - DO water Test the quality of liquid soap Liquid soap solutions Preparation of the solution of liquid soap
12. Add each solution of liquid soap into test tube, 4 ml per tube Shake each test tube Observe and write down the results Measure the foam capacity
13. Results of measuring foam capacity Chart 1. Show the results of measuring foam capacity
14. Measure the pH value of each solution of liquid soap by pH - meter The pH value of each solution was written down Adjust pH meter by buffer solution Measure the pH value
15. Results of measuring the pH value pH formulas Chart 2. Show the results of measuring the pH value
16. Add paraffin oil into two test tubes, 10 drops per tube Add the solution of the 1 st formula of liquid soap into test tubes, 5 ml per tube then shake The results of testing the ability of emulsifying paraffin oil were observed and written down Do this experiment to each solution of liquid soap Test the ability of emulsifying paraffin oil
17. Results of emulsifying paraffin oil test Table 3. Show the results of emulsifying paraffin oil test The solution has clear yellow color, there is the oil layer between the foam and the solution 1.75 mm high Formula 3 The solution has light yellow color, it is turbid, there is the oil layer between the foam and the solution 3 mm high Formula 2 The solution has clear yellow color, there is the oil layer between the foam and the solution 2 mm high Formula 1 The solution has no color, there is the oil layer on the surface 5 mm high. It separates obviously DO water The results Formula
18. Results of emulsifying paraffin oil test The solution has white color, it is turbid, there is the oil layer between the foam and the solution 2.5 mm high Formula 4 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 2 mm high Formula 6 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 2 mm high Formula 7 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 2 mm high Formula 8 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 1.5 mm high Formula 5 The results Formula
19. Results of emulsifying paraffin oil test The solution has white color, it is turbid, there is the oil layer between the foam and the solution 1.5 mm high Formula 12 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 1.5 mm high Formula 11 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 2.5 mm high Formula 10 The solution has white color, it is turbid, there is the oil layer between the foam and the solution 1.75 mm high Formula 9 The results Formula
20. Liquid soap solution Paraffin oil Studying the reaction of liquid soap with Ca 2+ , Mg 2+ and Fe 3+ The results were written down CaCl 2 MgCl 2 FeCl 3 The results were written down
21. Results Table 4. Show the results of studying the reaction of liquid soap with Ca 2+ , Mg 2+ and Fe 3+ there is a big piece of brick-red dregs. there are turbid white dregs. there are turbid white dregs. 3 there are turbid orange dregs. there are turbid white dregs. there are turbid white dregs. 4 there are turbid orange dregs. there are soft yellow dregs. there are soft yellow dregs. 5 there is a big piece of brick-red dregs. there are turbid white dregs. there are turbid white dregs. 2 there are turbid orange dregs. there are soft yellow dregs. there are turbid white dregs. 6 there is a big piece of brown-red dregs. there is no dreg in the tube. there are white dregs. 1 1 % FeCl 3 1 % MgCl 2 1 % CaCl 2 Reagents Formula
22. Results there is no dregs. there are soft yellow dregs. there are soft yellow dregs. 9 there are turbid orange dregs. there is no dregs. there is no dregs. 10 there are turbid orange dregs. there are turbid white dregs. there are turbid white dregs. 11 there are turbid orange dregs. there are turbid white dregs. there are turbid white dregs. 8 there are turbid orange dregs. there are turbid white dregs. there is no dregs. 12 there are orange dregs. there are white dregs. there are white dregs. 7 1 % FeCl 3 1 % MgCl 2 1 % CaCl 2 Reagents Formula
23. Results Table 5. Show the results of studying the reaction of liquid soap with Ca 2+ , Mg 2+ and Fe 3+ then with paraffin oil there is oil layer. there is a round piece of fat and dregs. there is oil layer. 3 there is a round piece of fat and dregs. there is oil layer. there is no oil layer. 4 there is a round piece of fat and dregs. there is oil layer. there is oil layer. 5 there is a round piece of fat and dregs. there is a round piece of fat and dregs. there is oil layer. 2 there is a round piece of fat and dregs. there is oil layer. there is oil layer. 1 1 % FeCl 3 1 % MgCl 2 1 % CaCl 2 Reagents Formula
24. Results there is oil layer. there is a round piece of fat and dregs. there is a round piece of fat and dregs. 6 there is oil layer. there is oil layer. there is oil layer. 9 there is oil layer. there is oil layer. there is oil layer. 10 there is oil layer. there is oil layer. there is oil layer. 11 there is a round piece of fat and dregs. there is oil layer. there is oil layer. 8 there is oil layer. there is oil layer. there is oil layer. 12 there is a round piece of fat and dregs. there is no oil layer. there is oil layer. 7 1 % FeCl 3 1 % MgCl 2 1 % CaCl 2 Reagents Formula
26. Results Table 6. Show the results of studying the reaction of liquid soap with inorganic acid there is no flame. dissolved in KOH there are dregs. 3 there is no flame. there is no dregs. there is no dregs. 4 there is no flame. there is no dregs. there is no dregs. 5 there is flame when burned. dissolved in KOH there are dregs. 2 there is no flame. quite dissolved in KOH there are dregs. 6 there is no flame. dissolved in KOH there are dregs. 1 Burning Add KOH Add HCl Process Formula
27. Results there is no flame. dissolved in KOH there are dregs. 9 there is no flame. dissolved in KOH there are dregs. 10 there is no flame. dissolved in KOH there are dregs. 11 there is flame when burned. dissolved in KOH there are dregs. 8 there is no flame. dissolved in KOH there are dregs. 12 there is no flame. quite dissolved in KOH there are dregs. 7 Burning Add KOH Add HCl Process Formula
28. Measuring the satisfactions of using the liquid soaps Measuring the satisfactions of using the liquid soaps by 90 MWIT students with questionnaires, then the results were analyzed by SPSS 11.5 Section 1, Inquire the samples about personal information. Section 2, Inquire the samples about the satisfactions when using the liquid soaps such as produced foam, smell, colors and cleaning. Questionnaires
29. Results Chart 3. Show the ages of samples Chart 4. Show the personal ailment of samples
30. Results Table 7. Show the behavior of buying soap of samples 191 (100) 7 (3.66) 20 (10.47) 43 (22.51) 33 (17.28) 8 (4.19) 69 (36.13) 11 (5.76) Frequency ( % ) Total Others Price Cleaning Advertisement Foam Smell Color
31. Table 8. Show the standard of satisfied levels of liquid soaps Measuring the satisfaction of using the liquid soaps 3.50 - 4.00 2.50 - 3. 4 9 1.50 - 2. 4 9 1.00 - 1. 49 good quality and great satisfactions good quality and good satisfactions good quality and fairly good satisfactions bad quality and not satisfy points the level of satisfactions
32. Chart 5. Show the averaged satisfactions of using the liquid soaps Results
33. Conclusion - From the extraction of oil in pumpkin seeds oil, the oil content is about 30.6 % - From the experiments, the formula 10 has the most foam capacity in compare with all the liquid soap and the formula 9 has the most foam capacity in compare with 9 formulas produced liquid soap. - The formula 5, 11, 12 has the most ability to emulsify paraffin oil. As the paraffin oil is lipid with composed in dirt.
34. Conclusion - From the experiment of measuring pH value, the formula 7 has the least pH value in compare with 9 formulas produced liquid soap, which is 9.73. - From the measuring of satisfactions value of using liquid soap, the formula 7 , 8 and 9 satisfied the samples respectively.