SlideShare una empresa de Scribd logo
1 de 21
Descargar para leer sin conexión
Inspection Metrology
By
Prof N D Sadaphal
Assistant Professor
Sanjivani College of Engineering,
Kopargaon (Maharashtra State) 423601
Mechanical Engineering
20-10-2016
1
Inspection Metrology
Measurement - a procedure in which an unknown
quantity is compared to a known standard, using an
accepted and consistent system of units
Metrology – the science of measurement
1
 Accuracy – how closely the measured value agrees with the
true value
 Precision – a measure of the repeatability of the measurement
process
 Rule of 10 – the measuring instrument must be ten time more precise
than the specified tolerance.
 Resolution(L.C.)– the smallest variation of the variable that
can be detected
 Speed of response – how long the instrument takes
to measure the variable
 Others: operating range, reliability, cost
2
Characteristics of Measuring Instruments
20-10-2016
2
(a) High accuracy but low precision, (b) low accuracy but
high precision, and (c) high accuracy and high precision
(a) (b) (c)
3
• Automated inspection can be defined as the automation of one or more of
the steps involved in the inspection procedure.
• There are a number of alternative ways in which automated or semi-
automated inspection can be implemented:
1. Automated presentation of parts by an automatic handling system
with a human operator will performing the examination and
decision steps.
2. Automated examination and decision by an automatic inspection
machine, with manual loading (presentation) of parts into the
machine.(bottle filling plant)
3. Completely automated inspection system in which parts
presentation, examination, and decision are all performed
automatically.
Automated Inspection
4
20-10-2016
3
Where and When to Inspect
• Inspection can be performed at any of several places in
production:
1. Receiving inspection, when raw materials and parts are
received from suppliers.
2. At various stages of manufacturing, and
3. Before shipment to the customer.
5
Off-Line and On-Line Inspection
• The timing of the inspection procedure in relation to the
manufacturing process is an important consideration in
quality control.
• Two alternative situations can be distinguished:
1. Off-line inspection.
2. On-line inspection.
6
20-10-2016
4
Off-Line Inspection
• Off-line inspection is performed away from the manufacturing
process, and there is generally a time delay between processing
and inspection.
• Manual inspection is common.
7
On-Line Inspection
• The alternative to off-line inspection is on-line inspection, in
which the procedure is performed when the parts are made,
either as
 An integral step in the processing or assembly operation,
or
 Immediately afterward.
• Two on-line inspection procedures can be distinguished:
 On-line/in-process.
 On-line/post-process.
8
20-10-2016
5
On-Line/ in-process Inspection
• This is achieved by performing the inspection procedure during the
manufacturing operation.
• As the parts are being made, the inspection procedure is measuring
or gauging the parts simultaneously.
• Technologically, automated on-line/in-process insection of the
product is usually difficult and expensive to implement, As an
alternative, on-line/ post-process procedures are often used. 9
On-Line/ post-process Inspection
• The measurement or gauging procedure is accomplished
immediately following the production process.
• Even though it follows the process, it is still considered an on-
line method because it is integrated with the manufacturing
workstation, and the results of the inspection can immediately
influence the production operation of the next part.
10
20-10-2016
6
Contact and Non-contact Inspection Techniques
• Inspection techniques can be divided into two broad categories:
1. Contact Inspection.
2. Non-contact Inspection.
• In contact inspection, physical contact is made between the
object and the measuring or gauging instrument.
• In non-contact inspection no physical contact is made.
11
 Laser light beam is:
 Highly monochromatic - the light has a single wave length
 Highly collimated - the light rays are parallel
 These properties have motivated many applications in
measurement and inspection
Lasers Metrology
12
20-10-2016
7
Fig: Scanning laser system for measuring diameter of cylindrical workpart;
Time of interruption of light beam is proportional to diameter D.
Scanning Laser Systems
13
1. Laser beam deflected by a rotating mirror to sweeps a beam of
light past an object.
2. Photodetector on far side of the object senses the light beam during
its sweep except for the short time while it is interrupted by the
object.
3. This time period can be measured quickly with great accuracy.
4. A microprocessor system measures the time interruption related
to the size of the object in the path of the laser, and converts it to a
linear dimension.
Scanning Laser Systems
14
20-10-2016
8
Inspection Techniques
• Conventional techniques and CMMs compete with each other in the
measurement and inspection of part dimensions. The general application
ranges for the different types are presented in the PQ chart below
15
Coordinate Measuring Machines (CMM)
• Coordinate metrology is concerned with the measurement of the
actual shape and dimensions of an object and comparing these
with the desired shape and dimensions.
• In this connection, coordinate metrology consists of the
evaluation of the location, orientation, dimensions, and geometry
of the part or object.
• A Coordinate Measuring Machine (CMM) is an
electromechanical system designed to perform coordinate
metrology.
16
20-10-2016
9
Coordinate Measuring Machines
• A CMM consists of a constant probe that can be positioned in 3D
space relative to the surface of a workpart, and the x, y, and z
coordinates of the probe can be accurately and precisely recorded to
obtain dimensional data concerning the part geometry
17
18
Video 1
Video 2
Video 3
20-10-2016
10
19
(a) Single tip (b) multiple tip probes
Coordinate Measuring Machines
• CMM is composed of the following components:
 Probe head and probe
 Mechanical structure that provides motion to probe in three
Cartesian axes
 displacement transducers to measure the coordinate values of
each axis.
 Drive system and control unit to move each of the three axes
20
20-10-2016
11
CMM Mechanical Structure
(a) Cantilever (b) Moving bridge (c) Fixed bridge
21
22
20-10-2016
12
CMM Mechanical Structure
(d) Horizontal Arm (e) Gantry (f) Column
23
24
20-10-2016
13
CMM Controls
• The methods of operating and controlling a CMM can be classified
into four main categories:
1. Manual drive,
2. Manual drive with computer-assisted data processing,
3. Motor drive with computer-assisted data processing, and
4. Direct Computer Control with computer-assisted data processing
(DCC CMM).
25
•Higher productivity - a CMM can perform complex inspection procedures in
much less time than traditional manual methods.
•Greater inherent accuracy and precision than conventional methods.
•Reduced human error.
•Versatility - a CMM is a general purpose machine that can be used to
inspect a variety of part configurations.
CMM Advantages
26
20-10-2016
14
27
In human being vision system
Eye – senses the image.
Brain- analysis the information & take the action on the basis of
analysis.
Machine vision system
• It gives accurate result & take timely corrective action to control
the process.
• Mass Production.
28
Machine vision for Inspection
• 3D system
Only for special purpose Application
include 3D analysis of scenes.
• 2D system
--- Most commonly using system.
--- For measuring dimensions of parts.
 Verifying presence of components.
 Checking features of Flat or semi flat
surfaces.
20-10-2016
15
29
1. Image acquisition and digitization
2. Image processing and analysis
3. Interpretation
Functions of Machine Vision:-
30
1. Image acquisition system- capture of image by video camera &
dividing it into very small elements called as pixel.
digitization system- store the image data for subsequent analysis.
2. Image processing and analysis – involves segmentation (edge
location), Thresholding.
Edge location -Determining location of boundaries of object.
Thresholding –conversion of each pixel level into binary value.
3. Interpretation- it concerned with recognizing the object or
pattern recognition.
identify the object & comparing it with predefined models,
20-10-2016
16
Image acquisition system-
capture of image/video -(image acquisition)
then digitize it by ADC( Analog to digital converter) and store
analysis.
(dividing it into very small elements called as pixel.)
 There are mainly five categories of lighting systems.
 Front lighting
 Back lighting
 Side lighting
 Structured lighting
 Strobe Lighting.
31
Front lighting:
-Light source is located at the same side of the camera.
-Produces a reflected light from the object that allow inspection of
surface features.
Back lighting:
-Light source is placed between behind the object being viewed by the
camera.
-This create dark image of the object that contrasts sharply with the
light background.
-This type is used for inspect parts dimension and distinguish between
part outlines.
32
dark image/Silhouette
20-10-2016
17
33
Side lighting
-Light source is placed at the side of the surface to be illuminated.
-For finding out surface irregularities, flaws, defects on the surface.
Structured lighting
-Projection of special light pattern onto the object.
-Usually planer sheet of highly focused light are used.
34
20-10-2016
18
 Strobe Lighting.
 - The scene is illuminated by short pulse of high
intensity light which causes moving object appear to be
stationary.
35
It involves segmentation (consist of two different technique)
 Thresholding
 Edge detection
Thresholding-
-Conversion of each pixel intensity level into a binary value,
representing black or white.
-There is a threshold value of intensity
-If the value of the pixel intensity of the image is less than the
threshold value then the pixel value is Zero(Black) otherwise One(
White).
36
20-10-2016
19
Edge detection
-Determines the location of boundaries between an object and its
surroundings in an image.
37
-It concerned with recognizing the object or pattern recognition.
- Identify the object & comparing it with predefined models
 Template matching:-
 Compare one or more feature of an image with the
corresponding feature of model or template stored in
computer memory.
 Feature Weighting.
 Several features like area, length and perimeter are combined
into a single measure by assigning a weight to each feature
according to the relative importance in the identifying the
object.
 The score of the object in the image is compared with the
score of the image in the computer memory to achieve proper
identification.
38
20-10-2016
20
 Inspection  Identification
39

Más contenido relacionado

La actualidad más candente

Group technology
Group technologyGroup technology
Group technologyjntuhcej
 
Fluid power automation unit 1 introduction
Fluid power automation  unit 1 introductionFluid power automation  unit 1 introduction
Fluid power automation unit 1 introductionDineshS158
 
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.pptfahamkhan7
 
Comparators, Surface Flatness, Surface Roughness,
Comparators, Surface Flatness, Surface Roughness, Comparators, Surface Flatness, Surface Roughness,
Comparators, Surface Flatness, Surface Roughness, AFAQAHMED JAMADAR
 
Cnc, dnc & adaptive control
Cnc, dnc & adaptive controlCnc, dnc & adaptive control
Cnc, dnc & adaptive controlparabajinkya0070
 
Cnc axis and motion nomenclature
Cnc axis and motion nomenclatureCnc axis and motion nomenclature
Cnc axis and motion nomenclaturemeet shah
 
DNC machines tools
DNC machines toolsDNC machines tools
DNC machines toolsjntuhcej
 
CNC part programming
CNC part programmingCNC part programming
CNC part programmingjntuhcej
 
Interchangeability & selective assembly
Interchangeability & selective assemblyInterchangeability & selective assembly
Interchangeability & selective assemblyKumar Chirra
 
gauges, Metrology, Types of gauges
gauges, Metrology, Types of gaugesgauges, Metrology, Types of gauges
gauges, Metrology, Types of gaugesRaju D
 
COMPONENTS OF CIM
COMPONENTS OF CIM COMPONENTS OF CIM
COMPONENTS OF CIM manimaran m
 
Computer aided manufacturing
Computer aided manufacturingComputer aided manufacturing
Computer aided manufacturingGulfaraz alam
 
Intro to CAD/CAM/CIM
Intro to CAD/CAM/CIMIntro to CAD/CAM/CIM
Intro to CAD/CAM/CIMAbhay Gore
 
Computer aided quality control
Computer aided quality controlComputer aided quality control
Computer aided quality controlAhmad Bajwa
 

La actualidad más candente (20)

Group technology
Group technologyGroup technology
Group technology
 
Fluid power automation unit 1 introduction
Fluid power automation  unit 1 introductionFluid power automation  unit 1 introduction
Fluid power automation unit 1 introduction
 
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt
6 CHAPTER SIX - COMPUTER AIDED INSPECTION.ppt
 
Comparators, Surface Flatness, Surface Roughness,
Comparators, Surface Flatness, Surface Roughness, Comparators, Surface Flatness, Surface Roughness,
Comparators, Surface Flatness, Surface Roughness,
 
Cnc, dnc & adaptive control
Cnc, dnc & adaptive controlCnc, dnc & adaptive control
Cnc, dnc & adaptive control
 
Nc part programming
Nc part programmingNc part programming
Nc part programming
 
Cnc axis and motion nomenclature
Cnc axis and motion nomenclatureCnc axis and motion nomenclature
Cnc axis and motion nomenclature
 
NC, CNC & DNC Machine
NC, CNC & DNC Machine NC, CNC & DNC Machine
NC, CNC & DNC Machine
 
CNC Machines and its Components
CNC Machines and its ComponentsCNC Machines and its Components
CNC Machines and its Components
 
DNC machines tools
DNC machines toolsDNC machines tools
DNC machines tools
 
CNC part programming
CNC part programmingCNC part programming
CNC part programming
 
Interchangeability & selective assembly
Interchangeability & selective assemblyInterchangeability & selective assembly
Interchangeability & selective assembly
 
gauges, Metrology, Types of gauges
gauges, Metrology, Types of gaugesgauges, Metrology, Types of gauges
gauges, Metrology, Types of gauges
 
Apt programming
Apt programmingApt programming
Apt programming
 
Unit 2.1 cim
Unit 2.1 cimUnit 2.1 cim
Unit 2.1 cim
 
COMPONENTS OF CIM
COMPONENTS OF CIM COMPONENTS OF CIM
COMPONENTS OF CIM
 
Computer aided manufacturing
Computer aided manufacturingComputer aided manufacturing
Computer aided manufacturing
 
Intro to CAD/CAM/CIM
Intro to CAD/CAM/CIMIntro to CAD/CAM/CIM
Intro to CAD/CAM/CIM
 
Lecture 3 Computer - Aided Manufacturing (CAM)
Lecture 3 Computer - Aided Manufacturing (CAM)Lecture 3 Computer - Aided Manufacturing (CAM)
Lecture 3 Computer - Aided Manufacturing (CAM)
 
Computer aided quality control
Computer aided quality controlComputer aided quality control
Computer aided quality control
 

Destacado

Surface roughness 200708
Surface roughness 200708Surface roughness 200708
Surface roughness 200708Chandru Gowda
 
L9 slope deflection method
L9 slope deflection methodL9 slope deflection method
L9 slope deflection methodDr. OmPrakash
 
Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.Darshan Panchal
 
Ch 27 interference & wave nature of light online
Ch 27 interference & wave nature of light onlineCh 27 interference & wave nature of light online
Ch 27 interference & wave nature of light onlineScott Thomas
 
Surface finish measurement (mechanical measurement and metrology)
Surface finish measurement (mechanical measurement and metrology)Surface finish measurement (mechanical measurement and metrology)
Surface finish measurement (mechanical measurement and metrology)Navroz Navodia
 
Metrology and Measurements unit 2
Metrology and Measurements unit 2Metrology and Measurements unit 2
Metrology and Measurements unit 2Gopinath Guru
 
Linear metrology...2
Linear metrology...2Linear metrology...2
Linear metrology...2Nouman Ali
 
Chapter 7 measurement of surface finish
Chapter 7 measurement of surface finishChapter 7 measurement of surface finish
Chapter 7 measurement of surface finishVISHALM580
 
LINEAR and ANGULAR Measurement
LINEAR and ANGULAR MeasurementLINEAR and ANGULAR Measurement
LINEAR and ANGULAR MeasurementDhruv Parekh
 
LinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-PresentedLinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-PresentedSlideShare
 

Destacado (17)

Ch10
Ch10Ch10
Ch10
 
Surface roughness 200708
Surface roughness 200708Surface roughness 200708
Surface roughness 200708
 
L9 slope deflection method
L9 slope deflection methodL9 slope deflection method
L9 slope deflection method
 
Utsav mmm
Utsav mmmUtsav mmm
Utsav mmm
 
Surface Texture: The Perception
Surface Texture: The PerceptionSurface Texture: The Perception
Surface Texture: The Perception
 
Ch05
Ch05Ch05
Ch05
 
Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.
 
Mechanical measurement
Mechanical measurementMechanical measurement
Mechanical measurement
 
Ch 27 interference & wave nature of light online
Ch 27 interference & wave nature of light onlineCh 27 interference & wave nature of light online
Ch 27 interference & wave nature of light online
 
Surface finish measurement (mechanical measurement and metrology)
Surface finish measurement (mechanical measurement and metrology)Surface finish measurement (mechanical measurement and metrology)
Surface finish measurement (mechanical measurement and metrology)
 
Metrology and Measurements unit 2
Metrology and Measurements unit 2Metrology and Measurements unit 2
Metrology and Measurements unit 2
 
Linear metrology...2
Linear metrology...2Linear metrology...2
Linear metrology...2
 
Introduction to Metrology
Introduction to MetrologyIntroduction to Metrology
Introduction to Metrology
 
Chapter 7 measurement of surface finish
Chapter 7 measurement of surface finishChapter 7 measurement of surface finish
Chapter 7 measurement of surface finish
 
LINEAR and ANGULAR Measurement
LINEAR and ANGULAR MeasurementLINEAR and ANGULAR Measurement
LINEAR and ANGULAR Measurement
 
Mechanical measurements and Measurement systems
Mechanical measurements and Measurement systemsMechanical measurements and Measurement systems
Mechanical measurements and Measurement systems
 
LinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-PresentedLinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-Presented
 

Similar a Inspection metrology

COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptxCOMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptxDr.M BALA THEJA
 
Inspection Principles and practices, Inspection technologies.pptx
Inspection Principles and practices, Inspection technologies.pptxInspection Principles and practices, Inspection technologies.pptx
Inspection Principles and practices, Inspection technologies.pptxSonuSteephen
 
Precision measurement technology and application based on machine vision
Precision measurement technology and application based on machine visionPrecision measurement technology and application based on machine vision
Precision measurement technology and application based on machine visionIJRES Journal
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring  Machine (CMM)Coordinate Measuring  Machine (CMM)
Coordinate Measuring Machine (CMM)RajabhauMatePatil1
 
Automated Laser Scanning System For Reverse Engineering And Inspection
Automated Laser Scanning System For Reverse Engineering And InspectionAutomated Laser Scanning System For Reverse Engineering And Inspection
Automated Laser Scanning System For Reverse Engineering And InspectionJennifer Daniel
 
Automatic vision based inspection of railway track
Automatic vision based inspection of railway trackAutomatic vision based inspection of railway track
Automatic vision based inspection of railway trackeSAT Journals
 
Automatic vision based inspection of railway track
Automatic vision based inspection of railway trackAutomatic vision based inspection of railway track
Automatic vision based inspection of railway trackeSAT Publishing House
 
APPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMMAPPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMMSajid Sheikh
 
I0333043049
I0333043049I0333043049
I0333043049theijes
 
traffic jam detection using image processing
traffic jam detection using image processingtraffic jam detection using image processing
traffic jam detection using image processingMalika Alix
 
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...IRJET Journal
 
IRJET- Automatic Object Sorting Machine
IRJET- Automatic Object Sorting MachineIRJET- Automatic Object Sorting Machine
IRJET- Automatic Object Sorting MachineIRJET Journal
 
Measurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.comMeasurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.comEr. Bade Bhausaheb
 
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...xavier_sa
 
Probing Systems seminar
Probing Systems seminarProbing Systems seminar
Probing Systems seminarAUSTIN MOSES
 
Traffic jam detection using image processing
Traffic jam detection using image processingTraffic jam detection using image processing
Traffic jam detection using image processingSai As Sharman
 
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdfDvbRef1
 

Similar a Inspection metrology (20)

COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptxCOMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
 
Inspection Principles and practices, Inspection technologies.pptx
Inspection Principles and practices, Inspection technologies.pptxInspection Principles and practices, Inspection technologies.pptx
Inspection Principles and practices, Inspection technologies.pptx
 
Precision measurement technology and application based on machine vision
Precision measurement technology and application based on machine visionPrecision measurement technology and application based on machine vision
Precision measurement technology and application based on machine vision
 
Machine vision amk mtmr final
Machine vision amk  mtmr final Machine vision amk  mtmr final
Machine vision amk mtmr final
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring  Machine (CMM)Coordinate Measuring  Machine (CMM)
Coordinate Measuring Machine (CMM)
 
Automated Laser Scanning System For Reverse Engineering And Inspection
Automated Laser Scanning System For Reverse Engineering And InspectionAutomated Laser Scanning System For Reverse Engineering And Inspection
Automated Laser Scanning System For Reverse Engineering And Inspection
 
Automatic vision based inspection of railway track
Automatic vision based inspection of railway trackAutomatic vision based inspection of railway track
Automatic vision based inspection of railway track
 
Automatic vision based inspection of railway track
Automatic vision based inspection of railway trackAutomatic vision based inspection of railway track
Automatic vision based inspection of railway track
 
APPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMMAPPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMM
 
T03301030107
T03301030107T03301030107
T03301030107
 
I0333043049
I0333043049I0333043049
I0333043049
 
traffic jam detection using image processing
traffic jam detection using image processingtraffic jam detection using image processing
traffic jam detection using image processing
 
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...
IRJET- In-Situ Monitoring for Fatigue Crack Detection using Control System an...
 
IRJET- Automatic Object Sorting Machine
IRJET- Automatic Object Sorting MachineIRJET- Automatic Object Sorting Machine
IRJET- Automatic Object Sorting Machine
 
Measurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.comMeasurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.com
 
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...
Camera Analytics System (Based on IEEE topic Camera Selection for adaptive hu...
 
Cmm 3
Cmm 3Cmm 3
Cmm 3
 
Probing Systems seminar
Probing Systems seminarProbing Systems seminar
Probing Systems seminar
 
Traffic jam detection using image processing
Traffic jam detection using image processingTraffic jam detection using image processing
Traffic jam detection using image processing
 
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf
53_36765_ME591_2012_1__1_1_Mechatronics System Design.pdf
 

Más de nilesh sadaphal

Bsaic Mechanical Engineering_Design Fundamentals
Bsaic Mechanical Engineering_Design FundamentalsBsaic Mechanical Engineering_Design Fundamentals
Bsaic Mechanical Engineering_Design Fundamentalsnilesh sadaphal
 
Introduction to Mechanical Engineering_BME_Unit 1
Introduction to Mechanical Engineering_BME_Unit 1Introduction to Mechanical Engineering_BME_Unit 1
Introduction to Mechanical Engineering_BME_Unit 1nilesh sadaphal
 
Unit 2 2 design consideration
Unit 2 2 design considerationUnit 2 2 design consideration
Unit 2 2 design considerationnilesh sadaphal
 
Total Quality Management (TQM)
Total Quality Management (TQM)Total Quality Management (TQM)
Total Quality Management (TQM)nilesh sadaphal
 
Acceptance sampling (SQC)
Acceptance sampling (SQC)Acceptance sampling (SQC)
Acceptance sampling (SQC)nilesh sadaphal
 
2.3 limit,fits,tolerance & gauges
2.3 limit,fits,tolerance & gauges2.3 limit,fits,tolerance & gauges
2.3 limit,fits,tolerance & gaugesnilesh sadaphal
 
Comparators and its type
Comparators and its typeComparators and its type
Comparators and its typenilesh sadaphal
 

Más de nilesh sadaphal (15)

Bsaic Mechanical Engineering_Design Fundamentals
Bsaic Mechanical Engineering_Design FundamentalsBsaic Mechanical Engineering_Design Fundamentals
Bsaic Mechanical Engineering_Design Fundamentals
 
Introduction to Mechanical Engineering_BME_Unit 1
Introduction to Mechanical Engineering_BME_Unit 1Introduction to Mechanical Engineering_BME_Unit 1
Introduction to Mechanical Engineering_BME_Unit 1
 
Unit 3 sheetmetal
Unit 3 sheetmetalUnit 3 sheetmetal
Unit 3 sheetmetal
 
Unit 3 forging
Unit 3 forgingUnit 3 forging
Unit 3 forging
 
Unit 2 1 engg materials
Unit 2 1 engg materialsUnit 2 1 engg materials
Unit 2 1 engg materials
 
Unit 2 2 design consideration
Unit 2 2 design considerationUnit 2 2 design consideration
Unit 2 2 design consideration
 
Metrology of threads
Metrology of threadsMetrology of threads
Metrology of threads
 
Interferometers
InterferometersInterferometers
Interferometers
 
Total Quality Management (TQM)
Total Quality Management (TQM)Total Quality Management (TQM)
Total Quality Management (TQM)
 
Acceptance sampling (SQC)
Acceptance sampling (SQC)Acceptance sampling (SQC)
Acceptance sampling (SQC)
 
Quality & Quality tools
Quality & Quality toolsQuality & Quality tools
Quality & Quality tools
 
Metrology of threads
Metrology of threadsMetrology of threads
Metrology of threads
 
2.3 limit,fits,tolerance & gauges
2.3 limit,fits,tolerance & gauges2.3 limit,fits,tolerance & gauges
2.3 limit,fits,tolerance & gauges
 
Comparators and its type
Comparators and its typeComparators and its type
Comparators and its type
 
Measurement standards
 Measurement standards Measurement standards
Measurement standards
 

Último

Online electricity billing project report..pdf
Online electricity billing project report..pdfOnline electricity billing project report..pdf
Online electricity billing project report..pdfKamal Acharya
 
Block diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptBlock diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptNANDHAKUMARA10
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptDineshKumar4165
 
Minimum and Maximum Modes of microprocessor 8086
Minimum and Maximum Modes of microprocessor 8086Minimum and Maximum Modes of microprocessor 8086
Minimum and Maximum Modes of microprocessor 8086anil_gaur
 
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...Health
 
Thermal Engineering Unit - I & II . ppt
Thermal Engineering  Unit - I & II . pptThermal Engineering  Unit - I & II . ppt
Thermal Engineering Unit - I & II . pptDineshKumar4165
 
Learn the concepts of Thermodynamics on Magic Marks
Learn the concepts of Thermodynamics on Magic MarksLearn the concepts of Thermodynamics on Magic Marks
Learn the concepts of Thermodynamics on Magic MarksMagic Marks
 
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptxHOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptxSCMS School of Architecture
 
Unleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapUnleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapRishantSharmaFr
 
Rums floating Omkareshwar FSPV IM_16112021.pdf
Rums floating Omkareshwar FSPV IM_16112021.pdfRums floating Omkareshwar FSPV IM_16112021.pdf
Rums floating Omkareshwar FSPV IM_16112021.pdfsmsksolar
 
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...HenryBriggs2
 
Air Compressor reciprocating single stage
Air Compressor reciprocating single stageAir Compressor reciprocating single stage
Air Compressor reciprocating single stageAbc194748
 
Online food ordering system project report.pdf
Online food ordering system project report.pdfOnline food ordering system project report.pdf
Online food ordering system project report.pdfKamal Acharya
 
DeepFakes presentation : brief idea of DeepFakes
DeepFakes presentation : brief idea of DeepFakesDeepFakes presentation : brief idea of DeepFakes
DeepFakes presentation : brief idea of DeepFakesMayuraD1
 
notes on Evolution Of Analytic Scalability.ppt
notes on Evolution Of Analytic Scalability.pptnotes on Evolution Of Analytic Scalability.ppt
notes on Evolution Of Analytic Scalability.pptMsecMca
 
Computer Lecture 01.pptxIntroduction to Computers
Computer Lecture 01.pptxIntroduction to ComputersComputer Lecture 01.pptxIntroduction to Computers
Computer Lecture 01.pptxIntroduction to ComputersMairaAshraf6
 
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Arindam Chakraborty, Ph.D., P.E. (CA, TX)
 
Thermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VThermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VDineshKumar4165
 
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...soginsider
 

Último (20)

Online electricity billing project report..pdf
Online electricity billing project report..pdfOnline electricity billing project report..pdf
Online electricity billing project report..pdf
 
Block diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptBlock diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.ppt
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.ppt
 
Minimum and Maximum Modes of microprocessor 8086
Minimum and Maximum Modes of microprocessor 8086Minimum and Maximum Modes of microprocessor 8086
Minimum and Maximum Modes of microprocessor 8086
 
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...
+97470301568>> buy weed in qatar,buy thc oil qatar,buy weed and vape oil in d...
 
Thermal Engineering Unit - I & II . ppt
Thermal Engineering  Unit - I & II . pptThermal Engineering  Unit - I & II . ppt
Thermal Engineering Unit - I & II . ppt
 
Learn the concepts of Thermodynamics on Magic Marks
Learn the concepts of Thermodynamics on Magic MarksLearn the concepts of Thermodynamics on Magic Marks
Learn the concepts of Thermodynamics on Magic Marks
 
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptxHOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
HOA1&2 - Module 3 - PREHISTORCI ARCHITECTURE OF KERALA.pptx
 
Unleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leapUnleashing the Power of the SORA AI lastest leap
Unleashing the Power of the SORA AI lastest leap
 
Rums floating Omkareshwar FSPV IM_16112021.pdf
Rums floating Omkareshwar FSPV IM_16112021.pdfRums floating Omkareshwar FSPV IM_16112021.pdf
Rums floating Omkareshwar FSPV IM_16112021.pdf
 
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
scipt v1.pptxcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
 
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak HamilCara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
 
Air Compressor reciprocating single stage
Air Compressor reciprocating single stageAir Compressor reciprocating single stage
Air Compressor reciprocating single stage
 
Online food ordering system project report.pdf
Online food ordering system project report.pdfOnline food ordering system project report.pdf
Online food ordering system project report.pdf
 
DeepFakes presentation : brief idea of DeepFakes
DeepFakes presentation : brief idea of DeepFakesDeepFakes presentation : brief idea of DeepFakes
DeepFakes presentation : brief idea of DeepFakes
 
notes on Evolution Of Analytic Scalability.ppt
notes on Evolution Of Analytic Scalability.pptnotes on Evolution Of Analytic Scalability.ppt
notes on Evolution Of Analytic Scalability.ppt
 
Computer Lecture 01.pptxIntroduction to Computers
Computer Lecture 01.pptxIntroduction to ComputersComputer Lecture 01.pptxIntroduction to Computers
Computer Lecture 01.pptxIntroduction to Computers
 
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
Navigating Complexity: The Role of Trusted Partners and VIAS3D in Dassault Sy...
 
Thermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VThermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - V
 
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...
Hazard Identification (HAZID) vs. Hazard and Operability (HAZOP): A Comparati...
 

Inspection metrology

  • 1. Inspection Metrology By Prof N D Sadaphal Assistant Professor Sanjivani College of Engineering, Kopargaon (Maharashtra State) 423601 Mechanical Engineering
  • 2. 20-10-2016 1 Inspection Metrology Measurement - a procedure in which an unknown quantity is compared to a known standard, using an accepted and consistent system of units Metrology – the science of measurement 1  Accuracy – how closely the measured value agrees with the true value  Precision – a measure of the repeatability of the measurement process  Rule of 10 – the measuring instrument must be ten time more precise than the specified tolerance.  Resolution(L.C.)– the smallest variation of the variable that can be detected  Speed of response – how long the instrument takes to measure the variable  Others: operating range, reliability, cost 2 Characteristics of Measuring Instruments
  • 3. 20-10-2016 2 (a) High accuracy but low precision, (b) low accuracy but high precision, and (c) high accuracy and high precision (a) (b) (c) 3 • Automated inspection can be defined as the automation of one or more of the steps involved in the inspection procedure. • There are a number of alternative ways in which automated or semi- automated inspection can be implemented: 1. Automated presentation of parts by an automatic handling system with a human operator will performing the examination and decision steps. 2. Automated examination and decision by an automatic inspection machine, with manual loading (presentation) of parts into the machine.(bottle filling plant) 3. Completely automated inspection system in which parts presentation, examination, and decision are all performed automatically. Automated Inspection 4
  • 4. 20-10-2016 3 Where and When to Inspect • Inspection can be performed at any of several places in production: 1. Receiving inspection, when raw materials and parts are received from suppliers. 2. At various stages of manufacturing, and 3. Before shipment to the customer. 5 Off-Line and On-Line Inspection • The timing of the inspection procedure in relation to the manufacturing process is an important consideration in quality control. • Two alternative situations can be distinguished: 1. Off-line inspection. 2. On-line inspection. 6
  • 5. 20-10-2016 4 Off-Line Inspection • Off-line inspection is performed away from the manufacturing process, and there is generally a time delay between processing and inspection. • Manual inspection is common. 7 On-Line Inspection • The alternative to off-line inspection is on-line inspection, in which the procedure is performed when the parts are made, either as  An integral step in the processing or assembly operation, or  Immediately afterward. • Two on-line inspection procedures can be distinguished:  On-line/in-process.  On-line/post-process. 8
  • 6. 20-10-2016 5 On-Line/ in-process Inspection • This is achieved by performing the inspection procedure during the manufacturing operation. • As the parts are being made, the inspection procedure is measuring or gauging the parts simultaneously. • Technologically, automated on-line/in-process insection of the product is usually difficult and expensive to implement, As an alternative, on-line/ post-process procedures are often used. 9 On-Line/ post-process Inspection • The measurement or gauging procedure is accomplished immediately following the production process. • Even though it follows the process, it is still considered an on- line method because it is integrated with the manufacturing workstation, and the results of the inspection can immediately influence the production operation of the next part. 10
  • 7. 20-10-2016 6 Contact and Non-contact Inspection Techniques • Inspection techniques can be divided into two broad categories: 1. Contact Inspection. 2. Non-contact Inspection. • In contact inspection, physical contact is made between the object and the measuring or gauging instrument. • In non-contact inspection no physical contact is made. 11  Laser light beam is:  Highly monochromatic - the light has a single wave length  Highly collimated - the light rays are parallel  These properties have motivated many applications in measurement and inspection Lasers Metrology 12
  • 8. 20-10-2016 7 Fig: Scanning laser system for measuring diameter of cylindrical workpart; Time of interruption of light beam is proportional to diameter D. Scanning Laser Systems 13 1. Laser beam deflected by a rotating mirror to sweeps a beam of light past an object. 2. Photodetector on far side of the object senses the light beam during its sweep except for the short time while it is interrupted by the object. 3. This time period can be measured quickly with great accuracy. 4. A microprocessor system measures the time interruption related to the size of the object in the path of the laser, and converts it to a linear dimension. Scanning Laser Systems 14
  • 9. 20-10-2016 8 Inspection Techniques • Conventional techniques and CMMs compete with each other in the measurement and inspection of part dimensions. The general application ranges for the different types are presented in the PQ chart below 15 Coordinate Measuring Machines (CMM) • Coordinate metrology is concerned with the measurement of the actual shape and dimensions of an object and comparing these with the desired shape and dimensions. • In this connection, coordinate metrology consists of the evaluation of the location, orientation, dimensions, and geometry of the part or object. • A Coordinate Measuring Machine (CMM) is an electromechanical system designed to perform coordinate metrology. 16
  • 10. 20-10-2016 9 Coordinate Measuring Machines • A CMM consists of a constant probe that can be positioned in 3D space relative to the surface of a workpart, and the x, y, and z coordinates of the probe can be accurately and precisely recorded to obtain dimensional data concerning the part geometry 17 18 Video 1 Video 2 Video 3
  • 11. 20-10-2016 10 19 (a) Single tip (b) multiple tip probes Coordinate Measuring Machines • CMM is composed of the following components:  Probe head and probe  Mechanical structure that provides motion to probe in three Cartesian axes  displacement transducers to measure the coordinate values of each axis.  Drive system and control unit to move each of the three axes 20
  • 12. 20-10-2016 11 CMM Mechanical Structure (a) Cantilever (b) Moving bridge (c) Fixed bridge 21 22
  • 13. 20-10-2016 12 CMM Mechanical Structure (d) Horizontal Arm (e) Gantry (f) Column 23 24
  • 14. 20-10-2016 13 CMM Controls • The methods of operating and controlling a CMM can be classified into four main categories: 1. Manual drive, 2. Manual drive with computer-assisted data processing, 3. Motor drive with computer-assisted data processing, and 4. Direct Computer Control with computer-assisted data processing (DCC CMM). 25 •Higher productivity - a CMM can perform complex inspection procedures in much less time than traditional manual methods. •Greater inherent accuracy and precision than conventional methods. •Reduced human error. •Versatility - a CMM is a general purpose machine that can be used to inspect a variety of part configurations. CMM Advantages 26
  • 15. 20-10-2016 14 27 In human being vision system Eye – senses the image. Brain- analysis the information & take the action on the basis of analysis. Machine vision system • It gives accurate result & take timely corrective action to control the process. • Mass Production. 28 Machine vision for Inspection • 3D system Only for special purpose Application include 3D analysis of scenes. • 2D system --- Most commonly using system. --- For measuring dimensions of parts.  Verifying presence of components.  Checking features of Flat or semi flat surfaces.
  • 16. 20-10-2016 15 29 1. Image acquisition and digitization 2. Image processing and analysis 3. Interpretation Functions of Machine Vision:- 30 1. Image acquisition system- capture of image by video camera & dividing it into very small elements called as pixel. digitization system- store the image data for subsequent analysis. 2. Image processing and analysis – involves segmentation (edge location), Thresholding. Edge location -Determining location of boundaries of object. Thresholding –conversion of each pixel level into binary value. 3. Interpretation- it concerned with recognizing the object or pattern recognition. identify the object & comparing it with predefined models,
  • 17. 20-10-2016 16 Image acquisition system- capture of image/video -(image acquisition) then digitize it by ADC( Analog to digital converter) and store analysis. (dividing it into very small elements called as pixel.)  There are mainly five categories of lighting systems.  Front lighting  Back lighting  Side lighting  Structured lighting  Strobe Lighting. 31 Front lighting: -Light source is located at the same side of the camera. -Produces a reflected light from the object that allow inspection of surface features. Back lighting: -Light source is placed between behind the object being viewed by the camera. -This create dark image of the object that contrasts sharply with the light background. -This type is used for inspect parts dimension and distinguish between part outlines. 32 dark image/Silhouette
  • 18. 20-10-2016 17 33 Side lighting -Light source is placed at the side of the surface to be illuminated. -For finding out surface irregularities, flaws, defects on the surface. Structured lighting -Projection of special light pattern onto the object. -Usually planer sheet of highly focused light are used. 34
  • 19. 20-10-2016 18  Strobe Lighting.  - The scene is illuminated by short pulse of high intensity light which causes moving object appear to be stationary. 35 It involves segmentation (consist of two different technique)  Thresholding  Edge detection Thresholding- -Conversion of each pixel intensity level into a binary value, representing black or white. -There is a threshold value of intensity -If the value of the pixel intensity of the image is less than the threshold value then the pixel value is Zero(Black) otherwise One( White). 36
  • 20. 20-10-2016 19 Edge detection -Determines the location of boundaries between an object and its surroundings in an image. 37 -It concerned with recognizing the object or pattern recognition. - Identify the object & comparing it with predefined models  Template matching:-  Compare one or more feature of an image with the corresponding feature of model or template stored in computer memory.  Feature Weighting.  Several features like area, length and perimeter are combined into a single measure by assigning a weight to each feature according to the relative importance in the identifying the object.  The score of the object in the image is compared with the score of the image in the computer memory to achieve proper identification. 38
  • 21. 20-10-2016 20  Inspection  Identification 39