Rayleigh and Mie scattering are the dominant mechanisms by which sunlight is scattered in the atmosphere. Rayleigh scattering occurs when particles are much smaller than the wavelength of light and scatters light of short wavelengths more than long wavelengths, which is why the sky appears blue. Mie scattering occurs when particles are around the same size as the wavelength of light and results in scattering that is dependent on the size, shape, and composition of particles. Together these processes influence the light that reaches satellite sensors and enables remote sensing of the Earth.
2. Remote Sensing and its Applications in Soil Resource Mapping (ACSS-754)
Absorption.
Scattering
3. The atmosphere affects electromagnetic energy through absorption, scattering
and reflection.
How these processes affect radiation seen by the satellite depends on the path
length, the presence of particulates and absorbing gases, and wavelengths
involved.
transmitted
absorbed,
emitted and
scattered by
aerosols and
molecules
transmitted
absorbed
&scattered
emitted
reflected
transmitted
reflected
absorbed
emitted
Land
emitted
reflected
transmitted absorbed
Ocean
Figure-... Process of Atmospheric Radiation
5. EM radiation from the sun interacts with the atmospheric constituents
and gets absorbed or scattered. Essentially two types of scattering
takes place:
Elastic scattering in which the energy of radiation is not changed due
to the scattering, and
inelastic scattering in which the energy of the scattered radiation is
changed.
3 types of elastic scattering
is recognized in atmospheric scattering
Rayleigh scattering
Mie scattering
Nonselective scattering
6. Radiation scattered from a particle depends on:
Size;
Shape;
Index of refraction;
Wavelength of radiation;
View geometry.
For Rayleight scattering, λ >> φ
•Scattering is diffuse (in all directions) and λ dependent or selective
• Scattering = 1/ λ4
For Mie scattering,
λ ≈φ
Where φ is particle size.
Scattering properties of such aerosols as smoke, dust, haze in
the visible part of the spectrum and of cloud droplets in the IR
region can be explanined by Mie scattering,
While of air molecules in the visible part can be explained by
Rayleigh Scattering
7. Rayleigh Scattering:
In Rayleigh scattering the volume scattering coefficient σλ is given by :
σλ
[4π
=
2
NV
λ
4
2
] ⋅ [µ
2
[µ
2
]
]
− µ0
2 2
+ µ0
2 2
=
const
λ
4
N= no. of particles/cm2
…. V= vol. of scattering particles
λ = wavelength of radiation … µ= refractive index of the particles
µ0= refractive index of the medium
Because of Rayleigh scattering Multispectral remote sensing data
from the blue portion of the spectrum is of relatively limited
usefulness. In case of aerial photography, special filters are used to
filter out the scattered blue radiation due to haze present in the
atmosphere.
8. Mie scattering
a2
σ λ =10 π ∫ N (a ) K (a, µ)a da
5
2
a1
σλ = Mie scattering coefficient at wavelength λ
N(a) = no. of particles in interval of radius a and a + da
K(a, µ) = scattering coefficient(cross section ) as a function of
spherical particles of radius a and the refractive index of the
particles µ
Mie scattering usually manifests itself as a general deterioration of
multispectral images across the optical spectrum under conditions of
heavy atmospheric haze
9. Nonselective Scattering
Particles are much larger than the wavelength λ >> l
All wavelength are scattered equally
Effects of scattering
It causes haze in remotely sensed images
It decreases the spatial detail on the images
It also decreases the contrast of the images
Water droplets with diameters ranging from 5-100 µm scatter all wavelengths of
visible light with equal efficiency. As a consequence, clouds and fog appear
whitish because a mixture of all colours in approximately equal quantities produces
white light.
Non selective scattering usually results when the atmosphere is
heavily dust and moisture ladden and results in a severe attenuation
of the received data. However, the occurrence of this scattering
mechanism is frequently a clue to the existence of large particulate
matter in the atmosphere above the scene of interest, and sometimes
this in itself becomes useful data.
10. Atmospheric scattering process
Scattering
process
Rayleigh
Mie
Nonselective
Wavelength Particle size
dependence
μm
λ-4
<<0.1
λ0 to λ-4
0.1-10
λ0
>10
Kind of
particles
Air molecules
Smoke ,
fume, Haze
Dust , Fog,
Cloud
Nonselective scattering occurs when the particles are much larger
than the wavelength of the radiation. Water droplets and large dust
particles can cause this type of scattering. Nonselective scattering gets
its name from the fact that all wavelengths are scattered about equally.
This type of scattering causes fog and clouds to appear white to our
eyes because blue, green, and red light are all scattered in
approximately equal
11. Atmospheric Windows
Atmospheric windows define wavelength ranges in which
the atmosphere is particularly transmissive of energy.
Visible region of the electromagnetic spectrum resides
within an atmospheric window with wavelengths of about
0.3 to 0.9 µm
Emitted energy from the earth's surface is sensed through
windows at 3 to 5 µm and 8 to 14 µm.
Radar and passive microwave systems operate through a
window region of 1 mm to 1 m.
12. Selective transmission of EMR by Earth’s
atmosphere
Transmission through the atmosphere is very selective.
Very high for wavelengths 0.3-1 µm and >1cm,
moderately good for 1-20 µm and 0.1-1 cm, and
very poor for <0.3 µm and 20-100 µm. This defines the
“ATMOSPHERIC WINDOWS”.
13.
14. Those wavelength ranges in which radiation can pass through
the atmosphere with relatively little attenuation.
atmospheric windows.
15. C. Interaction with Target
What the remote sensor is really measuring is how the energy
interacts with the target.
16. There are three (3) forms
of interaction that can take place
when energy strikes, or is incident
(I) upon the surface. These are:
Absorption (A);
Transmission (T);
Reflection (R).
Specular reflection
Diffuse reflection.
17. Leaves: chlorophyll strongly
absorbs radiation in the R and B but
reflects (G)green wavelengths.
Internal structure of healthy leaves
act as excellent diffuse reflectors of
near-infrared (NIR) wavelengths. In
fact, measuring and monitoring the
NIR reflectance is one way that can
determine healthiness of vegetation
Water: Longer λ visible and near
infrared radiation is absorbed more
by water than shorter visible
wavelengths. Thus water typically
looks blue or blue-green due to
stronger reflectance at these
shorter wavelengths,
18.
19. Spectral Reflectance Signature
When solar radiation hits a target surface, it may be transmitted,
absorbed or reflected. Different materials reflect and absorb
differently at different wavelengths.
The reflectance spectrum of a material is a plot of the fraction
of radiation reflected as a function of the incident wavelength and
serves as a unique signature for the material.
In principle, a material can be identified from its spectral reflectance
signature if the sensing system has sufficient spectral resolution to
distinguish its spectrum from those of other materials. This premise
provides the basis for multispectral remote sensing.
Spectral reflectance: the reflectance of electromagnetic energy at
specified wavelength intervals
20. Spectral signatures are the specific combination of emitted, reflected
or absorbed electromagnetic radiation (EM) at varying wavelengths
which can uniquely identify an object.
The spectral signature of an object is a function of the incidental EM
wavelength and material interaction with that section of the
electromagnetic spectrum.
Spectral Signature: Quantitative measurement of the properties of an
object at one or several wavelength intervals
21. For example, at some wavelengths, sand reflects more energy than green
vegetation but at other wavelengths it absorbs more (reflects less) than
does the vegetation.
In principle, we can recognize various kinds of surface materials and
distinguish them from each other by these differences in reflectance.
Of course, there must be some suitable method for measuring these
differences as a function of wavelength and intensity (as a fraction of the
amount of irradiating radiation).
Using reflectance differences, we can distinguish the four common surface
materials (GL = grasslands; PW = pinewoods; RS = red sand; SW = silty
water), shown in the next figure. Please note the positions of points for each
22. When we use more than two wavelengths, the plots in multidimensional space tend to show more separation among the materials.
This improved ability to distinguish materials due to extra
wavelengths is the basis for multispectral remote sensing
I-11: Referring to the above spectral plots, which region of the spectrum
(stated in wavelength interval) shows the greatest reflectance for a)
grasslands; b) pinewoods; c) red sand; d) silty water. At 0.6
23. By measuring the energy that is reflected (or emitted) by targets on
the Earth's surface over a variety of different wavelengths, we can
build up a spectral response for that object.
24.
25.
26.
27.
28.
29.
30.
31.
32. Vegetation has a unique spectral signature that enables it to be
distinguished readily from other types of land cover in an
optical/near-infrared image.
The reflectance is low in both the blue and red regions of
the spectrum, due to absorption by chlorophyll for
photosynthesis. It has a peak at the green region.
In the near infrared (NIR) region, the reflectance is much
higher than that in the visible band due to the cellular structure
in the leaves.
Hence, vegetation can be identified by the high NIR but
generally low visible reflectance.
33. The reflectance of clear water is generally low. However,
the reflectance is maximum at the blue end of the spectrum and
decreases as wavelength increases.
Hence, water
appears dark bluish to the visible eye.
Turbid water has some sediment suspension that increases the
reflectance in the red end of the spectrum and would be brownish
in appearance.
The reflectance of bare soil generally depends on its
composition. In the example shown, the reflectance increases
monotonically with increasing wavelength. Hence, it should appear
yellowish-red to the eye.
34.
35. The shape of the reflectance spectrum can be used for
identification of vegetation type.
For example, the reflectance spectra of dry grass and green
grass in the previous figures can be distinguished although
they exhibit the generally characteristics of high NIR but low
visible reflectance.
• Dry grass has higher reflectance in the visible
region but lower reflectance in the NIR region.
For the same vegetation type, the reflectance spectrum also
depends on other factors such as the
• leaf moisture content
• health of the plants.
These properties enable vegetation condition to be
monitored using remotely sensed images.
36.
37. Vegetation generally has low reflectance and low transmittance in
the visible part of the spectrum. This is mainly due to plant pigments
absorbing visible light. Chlorophyll pigments absorb violet-blue and
red light for photosynthetic energy. Green light is not absorbed for
photosynthesis and therefore most plants appear green.
In the autumn, some plant leaves turn from green to a brilliant yellow.
This change in foliage color is caused by the normal autumn
breakdown of chlorophyll (which usually is the dominant pigment
during the summer). After the breakdown of chlorophyll, other
pigments such as carotenes and xanthophylls become dominant and
therefore the foliage color changes from green to yellow.
Carotene and xanthophyll pigments absorb blue light and reflect
green and red light.
38.
39.
40.
41.
42.
43.
44.
45.
46. Spectral Signatures
• Reflectance is
wavelength
dependent
• Signatures
represent
average
reflectance
values
• Signatures are
spatially and
temporally
variable
47. The vertical axis shows the
percentage of incident sunlight
that is reflected by the
materials. The horizontal axis
shows wavelengths of energy
for the visible spectral region
0.4 to 7.0 µm. and the
reflected portion 0.7 to 3.0
µm. of the infrared IR. region.
Reflected IR energy consists
largely of solar energy
reflected from the earth at
wavelengths longer than the
sensitivity range of the eye.
The thermal portion of the IR
region 3.0to 1000 µm. consists
of radiant, or heat, energy….
Spectral bands recorded by remote sensing systems.
Spectral reflectance curves are for vegetation and sedimentary rocks.
48. Fig. 5A
shows reflectance spectra
of alunite and the three
common hydrothermal
clay minerals illite,
kaolinite, and
montmorillonite.
These minerals have
distinctive absorption
features (reflectance
minima) at wavelengths
within the bandpass of
TM band 7 which is
shown with a stippled
pattern in Fig. 5A.
Recognition of hydrothermal clays and alunite
from TM data, Goldfield mining district.
50. Laboratory spectra of alteration
minerals in the 2.0 to 2.5
µm band. Spectra are offset
vertically.
Note positions and bandwidths
of the spectral bands recorded
by AVIRIS and TM band 7.
Notas del editor
What the remote sensor is really measuring is how the energy interacts with the target.