Enviar búsqueda
Cargar
Compass JAA QUESTIONS
•
Descargar como PPT, PDF
•
8 recomendaciones
•
6,200 vistas
Q
quimrubau
Seguir
Denunciar
Compartir
Denunciar
Compartir
1 de 13
Descargar ahora
Recomendados
Gyroscope JAA QUESTIONS
Gyroscope JAA QUESTIONS
quimrubau
Gyro
Gyro compass navigation
Gyro compass navigation
Bibin Wilson
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui at DHA Suffa University. This lecture set deals with everything about airfoils.
ME438 Aerodynamics (week 8)
ME438 Aerodynamics (week 8)
Dr. Bilal Siddiqui, C.Eng., MIMechE, FRAeS
Finite Wings
Ch5.pdf
Ch5.pdf
AfreedFaizan1
NAVAL ARCHITECTURE HYDRODYNAMICS,
propellers and propulsion.pptx
propellers and propulsion.pptx
SaptarshiBasu23
basic gyro theory
Gyro
Gyro
Kotelawala Defence University
This ppt gives the basics of ship geometry representation that any naval architect would come across in the very basics of his academic course.
SHIP THEORY : Basics Of Ship Geometry : Lines Plan__by jishnu saji
SHIP THEORY : Basics Of Ship Geometry : Lines Plan__by jishnu saji
Jishnu Saji
gyro
Gyro
Gyro
renzel ordenes
Recomendados
Gyroscope JAA QUESTIONS
Gyroscope JAA QUESTIONS
quimrubau
Gyro
Gyro compass navigation
Gyro compass navigation
Bibin Wilson
ME438 Aerodynamics is offered by Dr. Bilal Siddiqui at DHA Suffa University. This lecture set deals with everything about airfoils.
ME438 Aerodynamics (week 8)
ME438 Aerodynamics (week 8)
Dr. Bilal Siddiqui, C.Eng., MIMechE, FRAeS
Finite Wings
Ch5.pdf
Ch5.pdf
AfreedFaizan1
NAVAL ARCHITECTURE HYDRODYNAMICS,
propellers and propulsion.pptx
propellers and propulsion.pptx
SaptarshiBasu23
basic gyro theory
Gyro
Gyro
Kotelawala Defence University
This ppt gives the basics of ship geometry representation that any naval architect would come across in the very basics of his academic course.
SHIP THEORY : Basics Of Ship Geometry : Lines Plan__by jishnu saji
SHIP THEORY : Basics Of Ship Geometry : Lines Plan__by jishnu saji
Jishnu Saji
gyro
Gyro
Gyro
renzel ordenes
gyroscopic instruments used in aviation
Gyroscopic instruments
Gyroscopic instruments
Mike Alpha
Free vibrstiom
Three rotor system
Three rotor system
M.D.Raj Kamal
A GYROCOMPASS IS A NON-MAGNETIC COMPASS USED FOR NAVIGATION AND STABILIZATION
Gyrocompass
Gyrocompass
Gokul Lakshmanan
Presentation about magnetism related with the ATPL syllabus
Magnetism
Magnetism
AmenBAL
konstruksi bagian depan kapal
Konst haluan Kapal
Konst haluan Kapal
tanalialayubi
Velocity in Mechanism by Instantaneous Center Method (ICM)
Module 2 instantenous center method
Module 2 instantenous center method
taruian
In modern-day military aviation, displays are the most a reliable method of presenting information to the pilots, with the increment of more sophisticated controls given to the pilots.
Displays and controls arrangement of military aircraft
Displays and controls arrangement of military aircraft
Lahiru Dilshan
by Rushikesh Raval..........
Types of cams and follower
Types of cams and follower
Rushikesh Raval
Inertial Navigation Systems
Inertial navigaton systems11
Inertial navigaton systems11
Vikas Kumar Sinha
Ships Using Different Propulsion Systems Are discussed.The Ships are: 1:KMS BATTLESHIP- BISMARCK 2:QUEEN ELIZABETH-CLASS AIRCRAFT CARRIER 3:USS ENTERPRISE (CVN-65) Prepared by:Vipin Devaraj, 38Th RS, Dept Of Ship Technology, Cusat,INDIA contact:vipindevaraj94@gmail.com
Propulsion Systems Of Ships
Propulsion Systems Of Ships
Vipin Devaraj
This PPT is about fundamentals of Bevel gear (introduction,terminology,geometric relationship,force analysis)
Unit ii bevel gears
Unit ii bevel gears
GaneshFodase1
METROLOGY -UNIT-5
Metrology unit-v (7-10-2015)
Metrology unit-v (7-10-2015)
United Institute of Technology
Gyroscope Handout updated
Gyroscope
Gyroscope
Ferdinand, Jr. Sta. Ana
Modul tuneup 1
Modul tuneup 1
Suhartono001
Dynamics of Machines Unit II-Balancing of Rotating Masses *Short notes *MCQ
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Dr.S.SURESH
Presentation on cam an followers
Presentation on cam an followers
kwame44
this for aeronautical students
Aircraft Systems and Instruments
Aircraft Systems and Instruments
Varun Karthikeyan
Mumbai University. Mechanical Engineering SEM V Dynamics of Machinery Governors and Gyroscopes: 1.1 Governors: Introduction to Centrifugal and Inertia governors, Force analysis of governors- Porter and Hartnell governors, Performance characteristics of governors, Governors effort and power 1.2 Gyroscope: Introduction, Gyroscopic couple and its effect on spinning bodies, naval ships during steering, pitching, rolling and their stabilization. Effect of gyroscopic and centrifugal couples, permissible speeds on curve paths, gyroscopic effect due to lateral misalignment of rigid disc mounted on shaft. 09 2 2.1 Static and Dynamic force analysis, in slider crank mechanism (neglecting mass of connecting rod and crank), Engine force analysis, Turning moment on crank shaft 2.2 Dynamically equivalent systems, to convert rigid body in to two mass with and without correction couple 06 3 3.1 Basic Concepts of Vibration: Vibration and oscillation, causes and effects of vibrations, Vibration parameters - springs, mass, damper, damper models, Motion- periodic, non-periodic, degree of freedom, static equilibrium position, vibration classification, steps involved in vibration analysis 3.2 Free Undamped Single Degree of Freedom Vibration System: Longitudinal, transverse, torsional, vibration system, methods for formulation of differential equations by Newton, Energy, Lagrangian and Rayleigh's method 08 4 4.1 Free Damped Single Degree of Freedom Vibration System: Viscous damped system - under damped, critically damped, over damped; Logarithmic decrement; Coulomb's damping 4.2 Equivalent Single Degree of Freedom Vibration System: Conversion of multi-springs, multi masses, multi-dampers into a single spring and damper with linear or rotational co-ordinate system, Introduction to free multi-degree of freedom vibration systems 07 5 5.1 Forced Single Degree of Freedom Vibratory System: Analysis of linear and torsional systems subjected to harmonic force excitation and harmonic motion excitation (excluding elastic damper) 5.2 Vibration Isolation and Transmissibility: Force Transmissibility, motion transmissibility, typical isolators & mounts. 5.3 Vibration Measuring instruments: Principle of seismic instruments, vibrometer, accelerometer - undamped and damped, Introduction to conditioning monitoring and fault diagnosis 6 6.1 Rotor Dynamics: Critical speed of single rotor, undamped and damped 6.2 Balancing: Static and Dynamic balancing of multi rotor system, balancing of reciprocating masses in In-line engines, V-engines (excluding other radial engines)
Dynamics of Machinery formulas
Dynamics of Machinery formulas
Keval Patil
a basic introduction to gears & dynamometeres
Introduction to Gears & Dynamometers (Theory of Machines)
Introduction to Gears & Dynamometers (Theory of Machines)
Ishan Parekh
it provides the basics of aircraftss...
Aircraft basics
Aircraft basics
Rohit Ranjan
this book is 4 edition of oxford aviation academy. Enjoy It
Jaa atpl book 01 air law
Jaa atpl book 01 air law
sn7
Instrumentation & Electronics
Instrumentation & Electronics
quimrubau
Más contenido relacionado
La actualidad más candente
gyroscopic instruments used in aviation
Gyroscopic instruments
Gyroscopic instruments
Mike Alpha
Free vibrstiom
Three rotor system
Three rotor system
M.D.Raj Kamal
A GYROCOMPASS IS A NON-MAGNETIC COMPASS USED FOR NAVIGATION AND STABILIZATION
Gyrocompass
Gyrocompass
Gokul Lakshmanan
Presentation about magnetism related with the ATPL syllabus
Magnetism
Magnetism
AmenBAL
konstruksi bagian depan kapal
Konst haluan Kapal
Konst haluan Kapal
tanalialayubi
Velocity in Mechanism by Instantaneous Center Method (ICM)
Module 2 instantenous center method
Module 2 instantenous center method
taruian
In modern-day military aviation, displays are the most a reliable method of presenting information to the pilots, with the increment of more sophisticated controls given to the pilots.
Displays and controls arrangement of military aircraft
Displays and controls arrangement of military aircraft
Lahiru Dilshan
by Rushikesh Raval..........
Types of cams and follower
Types of cams and follower
Rushikesh Raval
Inertial Navigation Systems
Inertial navigaton systems11
Inertial navigaton systems11
Vikas Kumar Sinha
Ships Using Different Propulsion Systems Are discussed.The Ships are: 1:KMS BATTLESHIP- BISMARCK 2:QUEEN ELIZABETH-CLASS AIRCRAFT CARRIER 3:USS ENTERPRISE (CVN-65) Prepared by:Vipin Devaraj, 38Th RS, Dept Of Ship Technology, Cusat,INDIA contact:vipindevaraj94@gmail.com
Propulsion Systems Of Ships
Propulsion Systems Of Ships
Vipin Devaraj
This PPT is about fundamentals of Bevel gear (introduction,terminology,geometric relationship,force analysis)
Unit ii bevel gears
Unit ii bevel gears
GaneshFodase1
METROLOGY -UNIT-5
Metrology unit-v (7-10-2015)
Metrology unit-v (7-10-2015)
United Institute of Technology
Gyroscope Handout updated
Gyroscope
Gyroscope
Ferdinand, Jr. Sta. Ana
Modul tuneup 1
Modul tuneup 1
Suhartono001
Dynamics of Machines Unit II-Balancing of Rotating Masses *Short notes *MCQ
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Dr.S.SURESH
Presentation on cam an followers
Presentation on cam an followers
kwame44
this for aeronautical students
Aircraft Systems and Instruments
Aircraft Systems and Instruments
Varun Karthikeyan
Mumbai University. Mechanical Engineering SEM V Dynamics of Machinery Governors and Gyroscopes: 1.1 Governors: Introduction to Centrifugal and Inertia governors, Force analysis of governors- Porter and Hartnell governors, Performance characteristics of governors, Governors effort and power 1.2 Gyroscope: Introduction, Gyroscopic couple and its effect on spinning bodies, naval ships during steering, pitching, rolling and their stabilization. Effect of gyroscopic and centrifugal couples, permissible speeds on curve paths, gyroscopic effect due to lateral misalignment of rigid disc mounted on shaft. 09 2 2.1 Static and Dynamic force analysis, in slider crank mechanism (neglecting mass of connecting rod and crank), Engine force analysis, Turning moment on crank shaft 2.2 Dynamically equivalent systems, to convert rigid body in to two mass with and without correction couple 06 3 3.1 Basic Concepts of Vibration: Vibration and oscillation, causes and effects of vibrations, Vibration parameters - springs, mass, damper, damper models, Motion- periodic, non-periodic, degree of freedom, static equilibrium position, vibration classification, steps involved in vibration analysis 3.2 Free Undamped Single Degree of Freedom Vibration System: Longitudinal, transverse, torsional, vibration system, methods for formulation of differential equations by Newton, Energy, Lagrangian and Rayleigh's method 08 4 4.1 Free Damped Single Degree of Freedom Vibration System: Viscous damped system - under damped, critically damped, over damped; Logarithmic decrement; Coulomb's damping 4.2 Equivalent Single Degree of Freedom Vibration System: Conversion of multi-springs, multi masses, multi-dampers into a single spring and damper with linear or rotational co-ordinate system, Introduction to free multi-degree of freedom vibration systems 07 5 5.1 Forced Single Degree of Freedom Vibratory System: Analysis of linear and torsional systems subjected to harmonic force excitation and harmonic motion excitation (excluding elastic damper) 5.2 Vibration Isolation and Transmissibility: Force Transmissibility, motion transmissibility, typical isolators & mounts. 5.3 Vibration Measuring instruments: Principle of seismic instruments, vibrometer, accelerometer - undamped and damped, Introduction to conditioning monitoring and fault diagnosis 6 6.1 Rotor Dynamics: Critical speed of single rotor, undamped and damped 6.2 Balancing: Static and Dynamic balancing of multi rotor system, balancing of reciprocating masses in In-line engines, V-engines (excluding other radial engines)
Dynamics of Machinery formulas
Dynamics of Machinery formulas
Keval Patil
a basic introduction to gears & dynamometeres
Introduction to Gears & Dynamometers (Theory of Machines)
Introduction to Gears & Dynamometers (Theory of Machines)
Ishan Parekh
it provides the basics of aircraftss...
Aircraft basics
Aircraft basics
Rohit Ranjan
La actualidad más candente
(20)
Gyroscopic instruments
Gyroscopic instruments
Three rotor system
Three rotor system
Gyrocompass
Gyrocompass
Magnetism
Magnetism
Konst haluan Kapal
Konst haluan Kapal
Module 2 instantenous center method
Module 2 instantenous center method
Displays and controls arrangement of military aircraft
Displays and controls arrangement of military aircraft
Types of cams and follower
Types of cams and follower
Inertial navigaton systems11
Inertial navigaton systems11
Propulsion Systems Of Ships
Propulsion Systems Of Ships
Unit ii bevel gears
Unit ii bevel gears
Metrology unit-v (7-10-2015)
Metrology unit-v (7-10-2015)
Gyroscope
Gyroscope
Modul tuneup 1
Modul tuneup 1
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Dynamics of Machines - Unit II-Balancing of Rotating Masses
Presentation on cam an followers
Presentation on cam an followers
Aircraft Systems and Instruments
Aircraft Systems and Instruments
Dynamics of Machinery formulas
Dynamics of Machinery formulas
Introduction to Gears & Dynamometers (Theory of Machines)
Introduction to Gears & Dynamometers (Theory of Machines)
Aircraft basics
Aircraft basics
Destacado
this book is 4 edition of oxford aviation academy. Enjoy It
Jaa atpl book 01 air law
Jaa atpl book 01 air law
sn7
Instrumentation & Electronics
Instrumentation & Electronics
quimrubau
ACARS,TCAS,IRS,FMS.
Typical electronic
Typical electronic
Mirza Masroor Ahmed Murad
NCEA Level 3 Physics Electricity AS91526 Magnetic Flux
Magnetic flux
Magnetic flux
amckaytghs
Magnetic Fields
Magnetic Fields
Paula Mills
10. contaminated runways
10. contaminated runways
chococrispis37
ATPL
Atpl book-3-electrics-and-electronics
Atpl book-3-electrics-and-electronics
Andreea Elena Cîrlan
5.15 Typical electronic digital aircraft systems
5.15 Typical electronic digital aircraft systems
lpapadop
Avionics Systems Instruments
Avionics Systems Instruments
Michael Bseliss
1 -efis
1 -efis
rapeouz
This slideshow was made for an invited talk at a local radio club that took place in early 2013. It introduces the methods of navigation and gives overview on the role of aerodrome and airspace traffic control. This powerpoint has some copyrighted materials which I don't have copyright for. Please msg/comment to let me know so I can amend/delete it.
Air traffic control & air navigation
Air traffic control & air navigation
Kelvin Lam
FD 022 02 01 00
FD 022 02 01 00
quimrubau
Enjoy It Good Luck
Jaa atpl book 04 oxford aviation jeppesen - powerplant
Jaa atpl book 04 oxford aviation jeppesen - powerplant
sn7
Enjoy It Good lock
Jaa atpl book 06 fpl1
Jaa atpl book 06 fpl1
sn7
Enjoy It Good Luck
Jaa atpl book 07 flight performance planing 2
Jaa atpl book 07 flight performance planing 2
sn7
Destacado
(15)
Jaa atpl book 01 air law
Jaa atpl book 01 air law
Instrumentation & Electronics
Instrumentation & Electronics
Typical electronic
Typical electronic
Magnetic flux
Magnetic flux
Magnetic Fields
Magnetic Fields
10. contaminated runways
10. contaminated runways
Atpl book-3-electrics-and-electronics
Atpl book-3-electrics-and-electronics
5.15 Typical electronic digital aircraft systems
5.15 Typical electronic digital aircraft systems
Avionics Systems Instruments
Avionics Systems Instruments
1 -efis
1 -efis
Air traffic control & air navigation
Air traffic control & air navigation
FD 022 02 01 00
FD 022 02 01 00
Jaa atpl book 04 oxford aviation jeppesen - powerplant
Jaa atpl book 04 oxford aviation jeppesen - powerplant
Jaa atpl book 06 fpl1
Jaa atpl book 06 fpl1
Jaa atpl book 07 flight performance planing 2
Jaa atpl book 07 flight performance planing 2
Similar a Compass JAA QUESTIONS
Chapter 4 : Angles AND Directions Magnetic Attraction
Chapter No. 04 - Angles and Directions.pptx
Chapter No. 04 - Angles and Directions.pptx
Saadtariq82
survey questions
Survey quiz
Survey quiz
Vandna Sambyal
Orphanage polytechnic Edavanna
Surveying - Module II - compass surveying
Surveying - Module II - compass surveying
SHAMJITH KM
For answer ukp
Jaswal item ukp.pdf
Jaswal item ukp.pdf
captmojo
Item untuk ukp paska
Paska ukp 2024.pdf
Paska ukp 2024.pdf
LobelloMolto
MCQ
7.surveying
7.surveying
Mani Das
Jaa POF sample questions
Principle of flight
Principle of flight
Vigneshwaran Gunasekaran
CORRECTIONS IN TOTAL STATION SURVEYING
Total station corrections
Total station corrections
Dr Gopikrishnan T
Plane and Applied Surveying 2 Traversing Theory Part Traverse Computations Definition Types of Meridian Applications of traversing Bearings Correction for observed angles (closed traverse) Check angular Misclosure Adjust angular Misclosure Calculate adjusted bearings Compute (E, N) for each traverse line Coordinates. -Traversing Methods of conducting Traverse 1. Theodolite 2. Total Station 2. Compass 3. GPS Bearings Bearings Bearing is the angle which a certain line make with a certain meridian. Bearing with respect to true meridian is called true bearings while magnetic bearing is the angle which a line makes with respect to magnetic meridian. There are two ways to represent the bearings, Fore and back bearings Whole circle bearing (W.C.B) ,(Azimuth) Reduced Bearing (R.B) or quadrant bearing 6 The bearing of a line measured in the forward direction of survey line is called the ‘Fore Bearing’ (FB) of that line. The bearing of the line measured in the direction opposite to the direction of the progress of survey is called the ‘Back Bearing’ (BB) of the line. BB= FB ± 180° + sign is applied when FB is < 180° - sign is applied when FB is > 180° 1) Whole Circle Bearing (W.C.B) (Azimuth) Is the bearing always measured from north in clockwise direction to a point. Whole Circle Bearing (W.C.B) (Azimuth) 2) Reduced Bearing Reduced bearing or Quadrant bearing is the angle which a line makes from North or South Pole whichever may be near. The value of angle is from 0° to 90° , and are taken either clock wisely or anti clock wisely. -Quadrant bearing The difference between the whole circle bearing and quadrant bearing are as follows. -Example The following fore bearings were observed for lines, AB, BC, CD, and DE Determine their back bearings: • 145°, 285°, 65°, 215° Example The Fore Bearing of the following lines are given Find the Back Bearing. (a) FB of AB= 310° 30’ (b) FB of BC= 145° 15’ (c) FB of CD = 210° 30’ (d) FB of DE = 60° 45’ Example: Convert the following whole circle bearing to quadrant or reduced bearings : ( i ) 42ᵒ 30’ ( ii ) 126ᵒ 15’ ( iii ) 242ᵒ 45’ ( iv ) 328ᵒ10’ Example Convert the following reduced bearings to whole circle bearings: ( I ) N 65ᵒ 12’ E ( ii ) S 36ᵒ 48’ E ( iii ) S 38ᵒ 18’ W ( iv ) N 26ᵒ 32’ W Closed Traverse • Ends at a known point with known direction Geometrical Constraints -Adjust the deflection angles 2-Interior angles Traverse Interior angles are measured clockwise or counterclockwise between two adjacent lines on the inside of a closed polygon figure. Example The following traverse have five sides with five internal angles. Find the angular misclosure and apply the angle correction -3-Exterior angle Traverse Correction for observed angles (closed traverse) Example: IF ∑observed angles for traverse (ABCDA)= 360˚00′ 48″ find misclosure and correct the interior angles. Check Allowable Angle Misclosure Prepared by:Asst. Prof. Salar K.Hussein Erbil Polytechnic University
Traverse Computations
Traverse Computations
Bahzad5
Surveying Engineering Traversing Practical part 1 Plane and Applied surveying 2 Report number(2) • Report name :Gales Traverse Table(Horizontal angle measurement (FL)of closed traversing • Apparatus • Theodolite Instrument • Tripod • Compass • Pin • Tape • Range pole Object • To conducted survey work in a closed traversing and calculate in depend coordinates and area calculation by coordinate rule. Procedure Traverse; Calculations Traverse .Dada Sheet and Table method work clock wise surveying -Gales Traverse Table. *Traverse Calculations -Traverse Calculation. -Coordinate conversions. -Signs of Departures and Latitudes. *Balancing latitude and departure -Correction for ∆E& ∆N: Bowditch adjustment or compass method -The example… -Vector components (pre-adjustment) *The adjustment components Prepared by: Asst. Prof. Salar K.Hussein Mr. Kamal Y.Abdullah Asst.Lecturer. Dilveen H. Omar Erbil Polytechnic University Technical Engineering College Civil Engineering Department
Traversing Practical part 1
Traversing Practical part 1
Bahzad5
This presentation is related to previous year questions of Renewable source of Energy and Mechatronics of Mechanical engineering ESE2020 Examination. I hope this will be beneficial for competitive exams aspirants.
Renewable source of energy
Renewable source of energy
deepa sahu
MCQ
Survey handsout question for sub er and asst
Survey handsout question for sub er and asst
Mani Das
ENGINEERING DRAWING PLACEMENT QUESTIONS
Engineering drawing objective bits for placement training m v reddy
Engineering drawing objective bits for placement training m v reddy
Venkateswar Reddy Mallepally
Nil
Cams
Cams
Er.JOE.S 09943145604
jdjkasnd
Project 2- traversing
Project 2- traversing
seenyee
project
Project 2- traversing
Project 2- traversing
seenyee
Surveying for 1-civil engineering
Surveying
Surveying
redaasd
air and dd question bank
air and dd question bank
Sudhir Kumar
in this presentation i have discussed previous year question mechanical engineering.
Mechanical Previous Year questions
Mechanical Previous Year questions
deepa sahu
;knljn
Scale-Drawings-Bearings-Demonstration.pptx
Scale-Drawings-Bearings-Demonstration.pptx
areenfakhoury1
Similar a Compass JAA QUESTIONS
(20)
Chapter No. 04 - Angles and Directions.pptx
Chapter No. 04 - Angles and Directions.pptx
Survey quiz
Survey quiz
Surveying - Module II - compass surveying
Surveying - Module II - compass surveying
Jaswal item ukp.pdf
Jaswal item ukp.pdf
Paska ukp 2024.pdf
Paska ukp 2024.pdf
7.surveying
7.surveying
Principle of flight
Principle of flight
Total station corrections
Total station corrections
Traverse Computations
Traverse Computations
Traversing Practical part 1
Traversing Practical part 1
Renewable source of energy
Renewable source of energy
Survey handsout question for sub er and asst
Survey handsout question for sub er and asst
Engineering drawing objective bits for placement training m v reddy
Engineering drawing objective bits for placement training m v reddy
Cams
Cams
Project 2- traversing
Project 2- traversing
Project 2- traversing
Project 2- traversing
Surveying
Surveying
air and dd question bank
air and dd question bank
Mechanical Previous Year questions
Mechanical Previous Year questions
Scale-Drawings-Bearings-Demonstration.pptx
Scale-Drawings-Bearings-Demonstration.pptx
Más de quimrubau
TCAS
TCAS
quimrubau
Control De Vuelo AutomáTico
Control De Vuelo AutomáTico
quimrubau
Encendido del motor alternativo
Encendido del motor alternativo
quimrubau
Engine Poster 2
Engine Poster 2
quimrubau
Alimentación del motor alternativo
Alimentación del motor alternativo
quimrubau
Airframe & Systems
Airframe & Systems
quimrubau
ACDC JAA QUESTIONS
ACDC JAA QUESTIONS
quimrubau
Instrumentos06,0[1]
Instrumentos06,0[1]
quimrubau
INGENIERÍA 172
INGENIERÍA 172
quimrubau
Refrigeración del motor alternativo
Refrigeración del motor alternativo
quimrubau
Engine Poster
Engine Poster
quimrubau
A320 RA
A320 RA
quimrubau
Spi 200 Sistema De Instrumentos De Vuelo
Spi 200 Sistema De Instrumentos De Vuelo
quimrubau
Análisis del Movimiento Giroscópico 2
Análisis del Movimiento Giroscópico 2
quimrubau
Análisis del Movimiento Giroscópico 1
Análisis del Movimiento Giroscópico 1
quimrubau
Instrumentos de a Bordo
Instrumentos de a Bordo
quimrubau
Jaa Datos de Aire
Jaa Datos de Aire
quimrubau
Revoluciones de Motor 022 04 03 00
Revoluciones de Motor 022 04 03 00
quimrubau
Ind. de Temp. 022 04 02 00
Ind. de Temp. 022 04 02 00
quimrubau
Ind. de Presión 022 04 01 00
Ind. de Presión 022 04 01 00
quimrubau
Más de quimrubau
(20)
TCAS
TCAS
Control De Vuelo AutomáTico
Control De Vuelo AutomáTico
Encendido del motor alternativo
Encendido del motor alternativo
Engine Poster 2
Engine Poster 2
Alimentación del motor alternativo
Alimentación del motor alternativo
Airframe & Systems
Airframe & Systems
ACDC JAA QUESTIONS
ACDC JAA QUESTIONS
Instrumentos06,0[1]
Instrumentos06,0[1]
INGENIERÍA 172
INGENIERÍA 172
Refrigeración del motor alternativo
Refrigeración del motor alternativo
Engine Poster
Engine Poster
A320 RA
A320 RA
Spi 200 Sistema De Instrumentos De Vuelo
Spi 200 Sistema De Instrumentos De Vuelo
Análisis del Movimiento Giroscópico 2
Análisis del Movimiento Giroscópico 2
Análisis del Movimiento Giroscópico 1
Análisis del Movimiento Giroscópico 1
Instrumentos de a Bordo
Instrumentos de a Bordo
Jaa Datos de Aire
Jaa Datos de Aire
Revoluciones de Motor 022 04 03 00
Revoluciones de Motor 022 04 03 00
Ind. de Temp. 022 04 02 00
Ind. de Temp. 022 04 02 00
Ind. de Presión 022 04 01 00
Ind. de Presión 022 04 01 00
Compass JAA QUESTIONS
1.
Compass Preguntas
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Descargar ahora