another version of magnetic flowmeter presentation.

1. BY:
Airin Nuryanda R. (111611004)
Indra Setiadi (101611018)
Intan Adilla (111611016)
Rizaldi Satria N. (111611026)

2. A magnetic flow meter (mag flowmeter) is a volumetric
flow meter which does not have any moving parts and is ideal
for wastewater applications or any dirty liquid which is
conductive or water based. Magnetic flowmeters will generally
not work with hydrocarbons, distilled water and many non-
aqueous solutions. Magnetic flowmeters are also ideal for
applications where low pressure drop and low maintenance are
required.

4. FMG600 Series
$ 3,650.00
 Virtually No Pressure
Loss
 No Moving Parts
 ANSI 150# Flanges or
Tri-Clover Sanitary
Mount
 RS485 Standard
 Suitable for Pipes Up to
12"
 High Accuracy
 4 to 20 mA and Frequency
Outputs Standard
 NIST 3-Point Calibration
Include

5. FMG3000 Series
$ 815.00
 For 0.5 to 8 in. Pipes
 No Moving Parts
 0.05 to 5 m/s (0.15 to 16.4
ft/s) Flow Rate Range
 Accurate Measurement
Even in Dirty Liquids
 Blind 4 to 20 mA or
Frequency Output
 No Pressure Drop
 Corrosion Resistant
Materials; PP or PVDF

6. FMG-550 Series
 1,618.00
$
 Hot-Tap Version for
Installation and Service
Without System
Shutdown
 Diagnostic Features
Using Colored LED
Lights
 Optional Detachable
Waterproof Cable
 No Moving Sensor
Parts

7. FMG201 Series
 Variety of Outputs
 Continuous Flow
Signal
 Relay Alarm Outputs
 Rate and Total
 NPT or Barb
Connection Options

9. FMG600 Series FMG3000 Series FMG-550 Series FMG201 Series
 $ 3,650.00  $ 815.00  $ 1,618.00  Variety of
 Virtually No  For 0.5 to 8 in.  Hot-Tap Outputs
Pressure Loss Pipes Version for  Continuous
 No Moving Parts  No Moving
Installation and Flow Signal
 ANSI 150# Flanges Parts
or Tri-Clover  0.05 to 5 m/s Service Without  Relay Alarm
Sanitary Mount (0.15 to 16.4 ft/s) System Outputs
 RS485 Standard Flow Rate Range Shutdown  Rate and
 Suitable for Pipes  Accurate  Diagnostic Total
Up to 12" Measurement Features Using  NPT or Barb
 High Accuracy Even in Dirty Colored LED Connection
 4 to 20 mA and Liquids Lights Options
Frequency Outputs  Blind 4 to 20 mA
 Optional
Standard or Frequency
 NIST 3-Point Output Detachable
Calibration Included  No Pressure Waterproof
Drop Cable
 Corrosion  No Moving
Resistant Sensor Parts
Materials; PP or
PVDF

10. Usually electrochemical and other effects at the
electrodes make the potential difference drift up and
down, making it hard to determine the fluid flow
induced potential difference. To mitigate this,
the magnetic field is constantly reversed, cancelling
out the static potential difference. This however
impedes the use of permanent magnets for magnetic
flowmeters.