2. Even voorstellen
Rob Roef
directeur marketing Kubus architecturalsolutions
rroef@kubusinfo.nl , www.kubusinfo.nl
Sinds 1991 BouwICT’er
Civieltechnicus met bovengemiddelde
interesse in ontwerpen & marketing
Netwerker, Rotterdammer, actief (bestuurs)lid Lighthouse Club, dagvoorzitter, gecommitteerde
Hogeschool Breda, mc, vader, echtgenoot, vriend, culinaire genieter, rockmuziek-luisteraar,
concert- en festival-bezoeker, fan
www.about.me/robroef
3. Kubus architecturalsolutions
“Kubus, in 1992 opgericht, stelt zich ten doel processen in
de bouw te optimaliseren middels BIM, gebruiksvriendelijke
sofware en werkprocessen. Onze praktijkgerichte down to
earth aanpak en de kwaliteit van onze oplossingen is
onderscheidend. Wij zijn o.a. jarenlang distributeur van
ArchiCAD in Nederland en België, partner van Solibri voor
de Benelux en maker van Kubus Stabu, Nederlands meest
gebruikte bestekverwerker.”
5. Solibri Model Checker™
• onmisbaar voor toetsing aan alle eisen
• uniek in zijn soort
• geschikt is voor automatische controle van een
gebouwmodel
• Enerzijds controlere van kwaliteit en integriteit
van het gebouwmodel
• Anderzijds inhoudelijk toetsen van het ontwerp
aan bijvoorbeeld Programma Van Eisen of
regelgeving.
• daarnaast visualisatie, clash detectie, de
vergelijking van modelversies over disciplines
heen en het uittrekken van hoeveelheden.
7. Solibri Model Checker™
• Model Checker
– vinden van potentiële problemen in een gebouwmodel.
– Modelkwaliteit en ontwerpfouten
– Verschillen opsporen
– Werken met Rule-sets
• Model Viewer
– gratis te downloaden
– werkt op Windows, Mac OS X en enkele Linux varianten
– importeert IFC 2.0, IFC 2x, IFC 2x2 en IFC 2x3 files
– importeert Solibri Model Checker bestanden, inclusief
resultaten en presentaties
• IFC Optimizer
– geschikte grootte voor e-mail bijlagen
– sneller uploaden in de IFC toepassingen
– minder geheugenverbruik in IFC toepassingen
– snellere laadtijden dus sneller werken met grote modellen en
meerdere versie
8. WIE IS CONSTRUSOFT
• Opgericht in 1995 in Nederland als officiële partner van Tekla
• Dochterondernemingen in heel Europa en in Zuid-Amerika
• 70 medewerkers
• Construsoft richt het pakket in voor specifiek gebruik naar wensen
van de gebruikers
• Is gespecialiseerd in
support, technische
ondersteuning, installatie en
lokalisatie van de software en
opleidingen in meerdere talen.
9. WIE IS TEKLA
• Opgericht als software leverancier voor ingenieursbureaus in1966
• Ontwikkelaar van Tekla Structures
• Hoofdkantoor in Espoo, Finland
• Heeft 450 medewerkers
• Eigen kantoren in 12 landen, 30 partners
• Gebruikers in ca. 80 landen
10. MODULES TEKLA STRUCTURES
De eerste volledig geïntegreerde 3D oplossing voor Constructief ontwerp en detaillering
11. GEBRUIKERS TEKLA STRUCTURES
Constructeurs, stabiliteit
Prefab beton
ingenieurs
fabrikanten, tekenaars, wapenin
g tekenaars
Wapening, in situ beton
Staal Aannemers, vastgoed
constructiebedrijven, tekenaar ontwikkelaars
s
13. Samenwerken in BIM
met het oog op het algemeen belang een bijdrage leveren
aan een gezamenlijk resultaat op niveau van een team,
entiteit of de organisatie, ook als dat niet onmiddellijk van
persoonlijk belang is
14. Samenwerkenin BIM
• bijwoord
– sport in het speelveld: de bal is nog in ; in zwang:
wintersportvakanties raken steeds meer in ;
• voorzetsel
– rondwandelen in een park ; iets in een vat gieten ; door de
hoofdingang liep hij het park in ;
15. SamenwerkeninBIM
• Brussels Instituut voor Milieubeheer, de regulator van het
Brussels Hoofdstedelijk Gewest.
• Beroepsvereniging van Insurance/Risk Managers
• Building InformationModeling
• Buitengewoon Irritant Modewoord
16. SamenwerkeninBIM
BIM is de oplossing die maakt dat alle relevante informatie
gedurende het hele bouwproces wordt opgeslagen, gebruikt
en beheerd in een digitaal (3D) gebouwmodel. Alle partijen
die bij het bouwproces betrokken zijn werken met dezelfde
informatie.
- bron: deBIMspecialist.nl -
17. Samenwerken in BIM
met het oog op het teambelang, gedurende het hele
bouwproces, een bijdrage leveren aan het gezamenlijk
digitaal (3D) gebouwmodel, ook als dat niet onmiddellijk
van persoonlijk belang is
25. Gebruikers willenméér
March 22, 2004
gelijktijdig bewerken van gegevens
verhinderd conflicterende bewerkingen
veranderingen direct zichtbaar voor
gebruikers
28. BIM = Building
InformationModeling
BIM is de oplossing die maakt dat alle relevante informatie
gedurende het hele bouwproces wordt opgeslagen, gebruikt
en beheerd in een digitaal (3D) gebouwmodel. Alle partijen
die bij het bouwproces betrokken zijn werken met dezelfde
informatie.
- bron: deBIMspecialist.nl -
40. REFERENTIEMODEL CONCEPT
• Verschillende disciplines, verschillende modelleer concepten
Architect’s
model
Architect’s Engineer’s
model model Engineer’s
model
44. Samenwerken in BIM
Een
• Samenwerken evolueert
• Referentiemodel concept
• Partners kiezen op basis expertise en niet op basis oplossing
applicatie
• Software kiezen die het beste aansluit bij uw
werkzaamheden zonder zich zorgen te hoeven maken over
de uitwisseling
• Meer mogelijkheden tot het toevoegen en delen van BIM
informatie
52. PANORAMA TOWER
Courtesy of Arkkitehtitoimisto Larkas&Laine
53. PANORAMA TOWER
Courtesy of Arkkitehtitoimisto Larkas&Laine
Gecombineerd model in Tekla
Structures
Notas del editor
Let me start at the very beginning…Before BIM there was the 2D world where the main advantage in the solutions was coming from the flexibility. Each user when in a team could work at the same time continuously on separate files. Coordination was minimal by xrefs compared manually.Then came the first BIM solutions where coordination of the different drawings derived from the model is done by the software itself. This has the advantage of fewer errors in the documentation phase but the model itself has to be updated continuously. This means that every time a change is effectuated the whole file is updated. The team members have to wait until the changes are sent and then received by all of the team members. This makes the first generation beam collaboration rather inflexible. So let’s leave the question open what will be the big next step next?
10 years ago it was not a question at allWe were simply selling the Virtual Building concept to our users
Let me start at the very beginning…Before BIM there was the 2D world where the main advantage in the solutions was coming from the flexibility. Each user when in a team could work at the same time continuously on separate files. Coordination was minimal by xrefs compared manually.Then came the first BIM solutions where coordination of the different drawings derived from the model is done by the software itself. This has the advantage of fewer errors in the documentation phase but the model itself has to be updated continuously. This means that every time a change is effectuated the whole file is updated. The team members have to wait until the changes are sent and then received by all of the team members. This makes the first generation beam collaboration rather inflexible. So let’s leave the question open what will be the big next step next?
10 years ago it was not a question at allWe were simply selling the Virtual Building concept to our users
Let me start at the very beginning…Before BIM there was the 2D world where the main advantage in the solutions was coming from the flexibility. Each user when in a team could work at the same time continuously on separate files. Coordination was minimal by xrefs compared manually.Then came the first BIM solutions where coordination of the different drawings derived from the model is done by the software itself. This has the advantage of fewer errors in the documentation phase but the model itself has to be updated continuously. This means that every time a change is effectuated the whole file is updated. The team members have to wait until the changes are sent and then received by all of the team members. This makes the first generation beam collaboration rather inflexible. So let’s leave the question open what will be the big next step next?
USER EXPECTATIONS
Let me start at the very beginning…Before BIM there was the 2D world where the main advantage in the solutions was coming from the flexibility. Each user when in a team could work at the same time continuously on separate files. Coordination was minimal by xrefs compared manually.Then came the first BIM solutions where coordination of the different drawings derived from the model is done by the software itself. This has the advantage of fewer errors in the documentation phase but the model itself has to be updated continuously. This means that every time a change is effectuated the whole file is updated. The team members have to wait until the changes are sent and then received by all of the team members. This makes the first generation beam collaboration rather inflexible. So let’s leave the question open what will be the big next step next?