Berhampur 70918*19311 CALL GIRLS IN ESCORT SERVICE WE ARE PROVIDING
How do i enable power over ethernet on a cisco 3560
1. Password Recovery for a Cisco 3560
The Cisco Catalyst 3560 is a solid member of the Cisco networking equipment team; it
contains the features that have made Cisco a market leader for many. Several
passwords exist for the 3560, including the enable password, the secret password and
the terminal password. It is no wonder that losing or forgetting passwords is a common
occurrence. Another reason for password problems can be when vendors do not reset
the passwords before a used Cisco 3560X is shipped to you. Do not panic---Cisco's
Catalyst switches have a built-in a password recovery function to help you when you do
not know the password.
Instructions
1 Connect your computer to the switch using the blue serial cable that came with it. The
9-pin d-shell end plugs into the serial port of your computer, and the RJ-45 end plugs into
the console port on the switch.
2 Boot up your computer and use any terminal emulator to build a terminal session for
the Catalyst 3560. Set the terminal session settings to 9600 baud, 8 data bits, no parity, 1
stop bit and Xon/Xoff flow control. Press and hold the "Mode" button on the left front of
the switch and plug in the switch power cable. Wait 5 seconds after the Status LED goes
out and then release the "Mode" button. The SYST LED should begin to blink amber.
Sponsored Links
Free Password Manager
Never Forget Your Passwords Again. Over 60 Million Downloads To Date.
www.roboform.com/Free
3 Enter the following commands at the "Switch:" prompt:
flash_init (press "Enter")
load_helper (press "Enter")
dir flash: (press "Enter")
The last command will display a directory of flash memory. Rename the existing
configuration file with the following command:
rename flash:config.text flash:config.old (press "Enter")
4 Enter "boot" at the "switch:" prompt and press "Enter." This will reboot the switch.
Answer "n" to the "System Configuration Dialog" prompt and press "Enter." Press "Enter"
again and you should see the "Switch>" prompt.
5 Enter "en" at the "Switch>" prompt. Press "Enter" to enter "Enable" mode. You should
see the prompt change to "Switch#." Issue the following command to rename the
configuration file:
1
2. rename flash:config.old flash:config.text (press "Enter")
Press "Enter" a second time to accept the default "Destination filename."
6 Issue following command to copy the configuration file into switch memory:
copy flash:config.text system:running-config (press "Enter")
Press "Enter" a second time to accept the default "Destination filename."
7 Issue the following commands at the prompt to create new passwords:
conf t (press "Enter")
enable secret spswd (where "spswd" is your new secret password) (press "Enter")
enable password enpswd (where "enpswd" is your new enable password) (press
"Enter")
line vty 0 15 (press "Enter")
password tpswd (where "tpswd" is your new terminal password) (press "Enter")
login (press "Enter")
line con 0 (press "Enter")
password cpswd (where "cpswd" is your new console password) (press "Enter")
write memory (press "Enter")
The "Building Configuration" message followed by the "[OK]" message and the "Sw1#"
prompt indicate that you have successfully performed password recovery on the Cisco
3560 Price.
—Original resource from
http://www.ehow.com/how_7642580_password-recovery-catalyst-3560.html
3Anetwork.com is a world leading Cisco networking products wholesaler, we wholesale
original new Cisco networking equipments, including Cisco Catalyst switches, Cisco
routers, Cisco firewalls, Cisco wireless products, Cisco modules and interface cards
products at competitive price and ship to worldwide.
Our website: http://www.3anetwork.com
Telephone: +852-3069-7733
Email: info@3Anetwork.com
Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong
2