Get help for Linksys router setup from routersupport.ca

1. http://www.routersupport.ca/linksys-router-login.html
http://www.routersupport.ca/linksys-router-error-codes.html
http://www.routersupport.ca/linksys-extender-setup.html
http://www.routersupport.ca/linksys-router-troubleshooting.html
http://www.routersupport.ca/linksys-router-technical-support.html
Linksys Router Setup
About Linksys Router Setup
The process is very easy and of course you can do it manually. You don’t even need to run the
installation CD or any kind of software.
Connect the modem and the computer to the Ethernet port on the router. Open the setup page and
change the settings manually. Seems very easy process.
Cable/DSL routers are very easy to install. You just need to access the Linksys Router Setup
page and change the Internet connection settings manually. Configuration page is the page where
you can change the settings. You can open this page when your computer is connected with the
Ethernet cable. Make sure that while changing the settings, your computer should be connected
with the Ethernet cable. Do not change the settings when your computer is wireless.
Easy steps for Linksys Router Setup
Step 1: First make sure that your modem is working. Connect your main computer directly to the
modem. Make sure that your main computer is able to access through the modem. If you are not
able to access it through the modem then contact your service provider and get your modem
working first.
Step 2: Connect the computer and modem to the Linksys router with the Ethernet cable. Connect
the modem to the Internet port (which is standing alone ) and computer to the Ethernet port. If
you connect the modem and computer to the wrong port, you will not be able to open the
Linksys router setup page. If you have computer connected to the WAN port then it will not
communicate with the Linksys router. Connection is very important. You will see 4 lights,
Power, WAN, wireless and Ethernet.
Step 3: Open browser and in the address bar type the number 192.168.1.1 . This is the default IP
address of almost all the models. However you can open the command prompt and check the IP
address on your computer.
Step 4: It will prompt you to enter the user name and password. The default password is admin.
If the default password is not working then you can reset the device to the factory default. Press
and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Power
cycle the router.
You will see the setup page on your screen. You will see different tabs on this page.

2. http://www.routersupport.ca/linksys-router-login.html
http://www.routersupport.ca/linksys-router-error-codes.html
http://www.routersupport.ca/linksys-extender-setup.html
http://www.routersupport.ca/linksys-router-troubleshooting.html
http://www.routersupport.ca/linksys-router-technical-support.html
Step 5: Change the Network connection settings according to your service provider. For Cable
service provider, you need to clone the MAC address of your main computer. For DSL Internet
service, you may need to change the PPPoE settings or you may need to change the IP address.
Step 6: Try to go online on your main computer.If you are not able to access the Internet on your
main computer then you might have missed the connection settings.
Step 7: Once you are able to go online on the main computer, you can change the wireless
network settings. Go to the wireless tab on the setup page. Change the wireless network name
and enter the security password for your wireless network.
The WEP / WPA key is nothing but a password for your wireless network. If you keep it open or
unsecured then any one can connect. They can use your Internet service for Free. To avoid this,
you should have security enabled. Many routers come with unsecured factory default settings.
For better connection, use WPA2 with AES encryption. WPA2 is a string security mode. WEP is
now older security mode and can be cracked easily. Wireless network security is very important
for your network.
Linksys router setup : Web-based Interface
Step 10: Now try to connect to the new wireless network on your computers/devices. Wireless
network connection on windows and MAC computers is really easy. First, you will need to
search for the SSID on your wireless computer. SSID is the name of your wireless network.
Once you find the SSID, try to connect to the SSID. Enter the password and you will be able to
access the Internet.
This is all about Linksys Router Setup, But, if the troubles are still on your way, you may contact
Routersupport.ca or call to our toll free number.