I specifically need help with part B 11) Consider the chemical reactio.docx

•Descargar como DOCX, PDF•

0 recomendaciones•2 vistas

I specifically need help with part B 11) Consider the chemical reaction shown below: a) Which reactant functions as an acid in this reaction? Explain your answer clearly b) When this reaction reaches equilibrium, will the cquilibrium mixture contain a higher concentration of products or of reactants? Explain your answer clearly Ka values: H2SO3-0.015 H:P04-62 x 10\" HS03-1,0 x 107 HP0,-0.007s Solution (b) Note : in this reaction 1: For forward reaction H 2 SO 3 is acid whereas for backwards H 3 PO 4 is acting acid thus more K a means faster reation as for H2SO3 is more thus forward reaction proceeds fast and hence more products will be formed. 2: same is the case for base acting species, more K a means less basic thus the species with lesser Ka will react faster with acid. this is for H2PO4 hence forward reaction is favoured. .

Educación

Más contenido relacionado

Similar a I specifically need help with part B 11) Consider the chemical reactio.docx

Buffers

Abd Nassar

9:46 LTE Labs Le.chateliers-lab.pdf Before beginning this experiment in the laboratory you should be alieto answer the following questions PRE LAB QUESTIONS 1. Beiefly stabe LeChidelier\'s Principle. 2. Consider the following equilibrium In which direction will the equilibrium shit if a. HSO,ibs added? Why? b. Buicl, is added? Why C NaCl is added? Why d. Heat is added? Why? Consider the folewing equilibrium foe nitous acid, HNOs,a weak acid In which direction will the equilibrium shift if a NaOH is added? b. NaNO, is added HCl is added? d. The acid solution is made more dilute? Complete and balance the following equations and then wrae balanced net ionic equations. 4· 3. On the busis of LeChitelier\'s Principle, explain why Ag-C0 disos when HNO, is added Previous Next Dashboard Calendar To DoNotifications Inbox Solution Answer: 1. Le Chtelier\'s principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to re-establish a new equilibrium 2.a) H2SO4 is added: the equilibrium shifts to the left because as there are more sulfate ions are added. b)BaCl2 is added The equilibrium shifts to the left because as there are more Ba^+2 are added. c) NaCl is added There is no shift in the equilibrium. As there are no Na^+1 and Cl^-1 are present in the equilibrium mixture d) Heat is added The equilibrium will shift to the right. As the forward reaction is endothermic, when the heat is added, the reaction will favours the product 3. a) NaOH is added The equilibrium will shift to the left because as there are more OH^-1 ions added, it will react with H+ present in the right side and forms more water. b)NaNO2 is added The equilibrium will shift to the left because the more NO2^-1 ions added, it forms more HNO2 by reacts with H3O^+1. c) HCl is added The equilibrium will shift to the right because more H+ is added in the equilibrium mixture d) The acid solution is made more dilute The equilibrium will shift to the right as there are more water is added. 4 a) AgNO3 (aq) + HCl (aq) <<>> AgCl (s) + HNO3 (aq) Net ionic equation: Ag^+1 (aq) + Cl^-1 (aq) >> AgCl (s) b) NH3(aq) + HCl (aq) <<<>> NH4Cl (s) Net equation: NH3 (aq) + H^+1 (aq) + Cl^-1 (aq) > NH4Cl(s) c) Na2CO3 (aq) + 2HNO3 (aq) <<>> H2O(l) + 2NaNO3 (aq) + CO2 (g) Net ionic equation: CO3 ^-2 (aq) + 2H+ (aq) >> H2O (l) + CO2 (g) 5. Ag2CO3 (s) + 2HNO3 (aq) <<<>>> 2AgNO3 (aq) + H2O (l) + CO2(g) Ag2CO3 is a solid . When adding nitric acid to silver carbonate, it forms soluble silver nitrate..

946 LTE Labs Le.chateliers-lab.pdf Before beginning this experiment.pdf

sktambifortune

Chapter-Acids-Bases-and-Salts-Important-questions-Free-pdf-notes.pdf

Shami Zama

acids and bases

smithdk

Acid, Base, pH & Buffer

ShibleeZaman

CHE 101_Buffers_DRK.pdf

AdityaJain425393

Nyb F09 Unit 3

Ben

Bt 202 aug 12 2011 ppt1997-2004

Mohit Chowdhury

08 acid base equilibria

Cleophas Rwemera

Chemistry zimsec chapter 22 ionic equilibria

alproelearning

Buffer and Isotonic Solution

Kãmäĺă Kč

Apchemunit15presentation 120311192458-phpapp01

Cleophas Rwemera

Acid Base -Part 2-.pptx

ssuser61c7aa

Buffer capacity MANIK

Imran Nur Manik

Buffer solution

Bahauddin Zakariya University lahore

Acid and base buffer

shinganaarti

Equilibrium

Ranjan K.M.

Buffer action and buffer capacity

RishitPanchal2

Buffers

Medical Knowledge

Buffers

Dr Yogi Pandya

Similar a I specifically need help with part B 11) Consider the chemical reactio.docx (20)

Buffers

946 LTE Labs Le.chateliers-lab.pdf Before beginning this experiment.pdf

Chapter-Acids-Bases-and-Salts-Important-questions-Free-pdf-notes.pdf

acids and bases

Acid, Base, pH & Buffer

CHE 101_Buffers_DRK.pdf

Nyb F09 Unit 3

Bt 202 aug 12 2011 ppt1997-2004

08 acid base equilibria

Chemistry zimsec chapter 22 ionic equilibria

Buffer and Isotonic Solution

Apchemunit15presentation 120311192458-phpapp01

Acid Base -Part 2-.pptx

Buffer capacity MANIK

Buffer solution

Acid and base buffer

Equilibrium

Buffer action and buffer capacity

Buffers

Más de rtodd409

Identify and describe SOX, using the characteristics of useful information. Solution The Meaning of SOX is Sarbane-oxley Act. It was passed in year 2002. It is the legislation passed by US Congress to protect shareholders and general public from accounting errors and fradulent practices in the enterprises as well as improve the accuracy of corporate disclosure.It is mandatory to all corporations which is listed. SOX was enacted after some corporate scandals happened by big Corporations like Erron,Tyco and world com. The Two key provision of the sarbane-oxley act. This is as follow: (1) Sec-302: It is mandatory for senior management to certify the accuracy of the reported financial statements. (2) Sec- 404 : This section say that corporations must establish internal control systems and reporting methods on the adeqacy of those controls with the help of Auditors and management. .

Identify and describe SOX- using the characteristics of useful informa.docx

rtodd409

Ice at -14.1 Â°C and steam at 117 Â°C are brought together at atmospheric pressure in a perfectly insulated container. After thermal equilibrium is reached, the liquid phase at 51.6 Â°C is present. Ignoring the container and the equilibrium vapor pressure of the liquid at 51.6 Â°C, find the ratio of the mass of steam to the mass of ice. The specific heat capacity of steam is 2020 J/(kg CÂ°). Solution Heat lost by steam =Heat gained by ice Q steam =Q ice m s c s (117 - 100) +m s L v +m s c w (100-51.6) =m I C i (0-(-14.1)) +m i L f +m i c w (51.6-0) m s (2020*17 +2.26*10 6 +4186*48.4] =m i [2000*14.1 +3.35*10 5 +4186*51.6] m s /m i = 0.232 .

Ice at -14-1 C and steam at 117 C are brought together at atmospheric.docx

rtodd409

I) II) Why do the s orbitals on H and Na not combine to form a strong covalent bond? Solution I) 2p orbitals are compact and concentrated and also they are closer together making the â€œsidewaysâ€ overlap of their \'p\' atomic orbitals that much better.Pi bonds are side to side bonds, large atoms hinder close approach. So that Pi bonds in C atoms are stronger than Pi bonds in Pb atoms. II) H atom can accept one electron and Na can donate one electron and becoming H - and Na + .These two atoms never share their electron, so that there is no formation of covalent bond. Na atom is strong electropositive atom. .

I) II) Why do the s orbitals on H and Na not combine to form a strong.docx

rtodd409

I used following codes to open a MRI image in the Matlab but it just gives a black. File is uploaded in this website: http://www.megafileupload.com/index.html?upload=1 [X, map] = dicomread(\'MRI.IMA\'); montage(X, map, \'Size\', [2 5]); and info = dicominfo(\'MRI.IMA\'); Y = dicomread(info); figure, imshow(Y); imcontrast; Solution we need to use the extension of the file as. dcm as we are reading a dicom image [X, map] = dicomread(\'MRI.dcm\'); // the extension should be .dcm montage(X, map, \'Size\', [2 5]); and //now we call dicomread with the information retrieved from the DICOM file using dicominfo and display the image using imshow. info = dicominfo(\'MRI.dcm\'); Y = dicomread(info); figure, imshow(Y); imcontrast;// helps to change the contrast of the image .

I used following codes to open a MRI image in the Matlab but it just g.docx

rtodd409

I need to prove that there exist no nontrivial homomorphisms from Z to Z. ( Trivial homomorphisms being f(x) = 0 and f(x) = x ) Solution If f is a ring homomorphism from Z to Z then f(1) = f(1*1) = f(1) * f(1) So we have 0 = f(1) * f(1) - f(1) 0 = f(1) * [f(1) - 1] Since Z has no zero divisors, we must have f(1) = 0 or f(1) = 1. In the former case f is the trivial homomorphism f(x) = 0. In the latter, f is the trivial homomorphism f(x) = x, since it is fairly easy to convince yourself that for any x in Z we have f(x) = x * f(1). .

I need to prove that there exist no nontrivial homomorphisms from Z to.docx

rtodd409

I need only the right choice 1. A dart is thrown horizontally toward X at 20 m/s as shown. It hits Y O.1 s later.The distance XY is A. 2 m B. 0.05m C. 0.1 m D. 0.5 m E. 1 m 2. An object is thrown vertically into the air. Which of the following graphs repro the velocity of the object as a function of time? rv B. I C. IV E. V Solution 1. option (a) is right. Velocity= distance/time Herw X= velocity Y= time XY= distance so that distance XY= 20m/s*0.1s= 2m >>>>>>>>>>> 2. Option (D) is right Velocity of object will decrease with time due to gravity This object will follow the equation v= u- gt .

I need only the right choice 1- A dart is thrown horizontally toward X.docx

rtodd409

I need some help understanding chemical reaction in inorganic chemistry. All of the compounds below are reacting with an abundance of water, what is the expected chemical reaction? Please tell me what I am doing wrong: MgCl 2 (s): BaSO 4 : Bariumsulphate is not soluble due to high lattice energi. However there is an equalibrium here, but I cant find it. I would very much appreciate it if you were to tell me how to approach problems such as these. MgCl2(s) + H20(I) ? Mg0 + HCI Solution MgCl 2 being an ionic compound gets dissolved into water and it breaks to the corresponding ions: MgCl 2 + H 2 O = Mg +2 (H2O) + 2 Cl - (H2O) CCl4 being a non polar covalent compound does not react with water. SO3 reacts with water vigorously to produce H2SO4. SO3 (g) + H2O (l) = H2SO4 (aq) BaSO4 is insoluble in water and no reaction occurs with water. .

I need some help understanding chemical reaction in inorganic chemistr.docx

rtodd409

I need help with this please. Show all work. Thank you. 8. Calculate a pH of a solution in which 20 ml of 0.10 M NaOH has been added to 25 mL of 0.10 M H2SO4 Solution reaction is H2SO4 + 2 NaOH ...........> Na2SO4 + 2 H2O one mole H2So4 is neutralized by two mole NaOh. 20 ml of 0.10 M NaOH = 0.020 * 0.10 = 0.0020 mole. 25 ml of 0.10 M H2So4 = 0.025 * 0.10 = 0.0025 mole. NaOH is the limiting reactant. excess H2SO4 = 0.0025 - 0.0020 / 2 = 0.0015 mole. assuming all the protons in H2SO4 are completely ionized. so moles of H+ = 0.0015 * 2 = 0.0030 mole. concentration of H+ = 0.0030 * 1000 / (20 + 25) = 0.06667 (M) PH = -log [H+] = - log (0.06667) = 1.18 PH = 1.18 .

I need help with this please- Show all work- Thank you- 8- Calculate a.docx

rtodd409

I having problems locating the fasb\'s conceptual framework Solution The Conceptual Framework include: measurement attributes used to measure and report economic transactions, events, and arrangements in financial statements; and accounting principles and assumptions that guide recognition, derecognition, and disclosure, as well as the classification and presentation of information in financial statements. Fundamental qualitative characteristics, relevance and faithful representation allow for decision usefulness. Information that is capable of making a difference in decisions made by financial statement users is relevant. The three components of relevance are: Faithful representation is when the words and numbers accurately predict the economic substance of what they purport to represent. The three components of faithful representation are: .

I having problems locating the fasb-'s conceptual frameworkSolutionThe.docx

rtodd409

I have two questions regarding linked lists in C. 1) We often declare a struct called \"Node\" for the linked list that has \"data\" and \"next\" fields. Why is it a problem to attempt to access data in a node that doesn\'t exist? 2) In regards to the sizeof() function, why is it that the size of a struct or node may be larger than the elements it contains? Solution Answer: 1) It is difficult because every node has a specified next node. Suppose we want to access data whose node does not exist so we have to first search that node isn\'t it? And since the node we are searching isn\'t in the list that is why we cannot extract data which is not there. 2) Size of the struct node may be larger than the elements it contains because along with data, some pointers also stored to access the next element. .

I have two questions regarding linked lists in C- 1) We often declare.docx

rtodd409

I have a questions which is what could be the advantage or disadvantage of importing data files using the uiimport wizard in matlab? please list couple of them with explanations would be deeply appricaited! Solution Advantages of importing data files using uiimport command or selecting import data option in matlab file menu: It is used to import differenent types of ASCII data including data on the clipboard. This wizard helps the user by providing series of dialog boxes to provide the name of file,delimiters and set of variables we want to import. User friendly interface is provided to import files with required fields. Disadvantages: Matlab is an interpreted language, it can be slow, and poor programming practices can make it unacceptably slow. .

I have a questions which is what could be the advantage or disadvantag.docx

rtodd409

I have a sealed container that is pressurised with Nitrogen. When calculating the density of a gas inside a container using d = (M * P) / (R *T) M = molar mass, P = pressure, R = gas constant, T = temperature. When putting in the molar mass for nitrogen do i need to put in the value of N = 14.0067, or that of N2 = 28.0134, given that N2 is the natural state? Also, why? Thank you Solution See, the pressure in the container is due to N2 gas not due to N atoms. So, the molar mass that should be taken is of N2 gas. Also, this expression is basically derived from ideal gas equation: PV = n RT Where n is number of moles of gas n = given mass of gas(m)/molar mass of gas(M) Here molar mass is for gas( if nitrogen then N2) PV = mRT/M PM = mRT/V PÃ—M/(RÃ—T) = m/ V = d d = P*M/(R*T) So, molar mass taken is of N2 .

I have a sealed container that is pressurised with Nitrogen- When calc.docx

rtodd409

I have a question from a Database Systems class (we have been taught with MySQL). Please provide an answer to the following question: Most large DBMS\'s have their own DML. What are some of the DML\'s out there? (Please provide a quality response and not just a short answer. Citations to the answer would be appreciated). Solution Answer:) Some of the DML\'s are: i. CALL : supported by PL/SQL ii. DELETE: removes a/multiple tuple or the entire table iii. EXPLAIN PLAN : supported by PL/SQL iv. INSERT: used for inserting values to a table v. LOCK TABLE: used for finalizing the table vi. MERGE: used for merging two or more table vii.SELECT: used to project data values from a table viii. UPDATE: used to update a table .

I have a question from a Database Systems class (we have been taught w.docx

rtodd409

HW Check: Categorize materials as n or p type semiconductors: a. Zn doped GaAs >>> p-type b. In 1+x As 1-x >>> n-type c. Li 0.05 Cu 0.95 O >>> p-type d. WO 2.999 >>> n-type Solution Answer - a.Zn doped with GaAs -It form p type semiconductors. As zinc is Zn +2 in ionic state. Zn have 2 electron in valance shell. b. In 1+x As 1-x it forms n-type semiconductor because ln(1+x) have more electrons then As(1-x) . c. Li 0.05 Cu 0.95 O is p-type as cu forms cu 2+ , During conduction d. WO 2.999 Here the conncentration of O is greater than W, hence it forms n-type semiconductor. All answer correct. .

HW Check- Categorize materials as n or p type semiconductors- a- Zn do.docx

rtodd409

Más de rtodd409 (14)