change this code in a way to enter the x(t) and h(t) as shown in the following figure and calculate and plot their convolution
I can just have the code, same structure way as the example please
Solution
clear all
close all
clc
stp=0.01;
t1=-5:stp:5;
x=zeros(1,length(t1));
ix1=find((t1>=--1)&(t1<1));
x(ix1)=1;
t2=0:stp:5
h=zeros(1,length(t2));
ix2=find((t2>=1)&(t2<4));
h(ix2)=1;
ix3=find((t2>=4)&(t2<5));
h(ix3)=2;
t=(min(t1)+min(t2)):stp:(max(t1)+max(t2));
y=stp*conv(x,h);
subplot(3,1,1)
plot(t1,x,\'linewidth\',2)
xlabel(\'t\')
ylabel(\'x(t)\')
grid on
subplot(3,1,2)
plot(t2,h,\'linewidth\',2)
xlabel(\'t\')
ylabel(\'h(t)\')
grid on
subplot(3,1,3)
plot(t,y,\'linewidth\',2)
xlabel(\'t\')
ylabel(\'y(t)\')
grid on
.
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
change this code in a way to enter the x(t) and h(t) as shown in the f.docx
1. change this code in a way to enter the x(t) and h(t) as shown in the following figure and calculate
and plot their convolution
I can just have the code, same structure way as the example please
Solution
clear all
close all
clc
stp=0.01;
t1=-5:stp:5;
x=zeros(1,length(t1));
ix1=find((t1>=--1)&(t1<1));
x(ix1)=1;
t2=0:stp:5
h=zeros(1,length(t2));
ix2=find((t2>=1)&(t2<4));
h(ix2)=1;
ix3=find((t2>=4)&(t2<5));
h(ix3)=2;
t=(min(t1)+min(t2)):stp:(max(t1)+max(t2));
y=stp*conv(x,h);
subplot(3,1,1)
plot(t1,x,'linewidth',2)
xlabel('t')
ylabel('x(t)')
grid on
subplot(3,1,2)
plot(t2,h,'linewidth',2)
xlabel('t')
ylabel('h(t)')
grid on
subplot(3,1,3)
plot(t,y,'linewidth',2)
