Module 2 Assessment at Questions Question 1 Started: Feb 19 at 11:04am Question 2 Quiz Instructions Question 3 Question 4 Remember, the modules have no bearing on each other - you do not need the first one graded before you can begin Question 5 this one. Time Elapsed: For this assessment, open the following file: Attempt due: Mar 26 at 11:59pm Module2Assessment.xls 27 Days, 56 Minutes, 56 Seconds This file is a grade sheet for a class. You need to calculate final grades for the professor, using the following guidelines: 1. This class uses weighting, which you will need to account for in the calculation. Exams are worth 80% of the grade, and the class project is worth 20% of the grade. To calculate the final grade percentage you will need to add up the exam scores; then divide by the total number of exam points and then multiply by the weighted percentage. In a similar manner, calculate the percentage for the project. Then add the two totals together to get the final grade. Remember, students cannot earn more than 100%!! 2. Once you have the grade percentages, then calculate the letter grades and plus/minus letter grades. 3. Next, complete the data for columns M through R showing the grade percentages (Note do NOT use adjusted percentages!!), the corresponding plus/minus letter that equates to, how many students had that grade, what percentage that is of total students, the grade point and the average. 4. Using the letter grades and total students (columns N and O), create a Grade Distribution graph. 5. Use the technics you learned in the module to complete the file, then complete the assessment questions using the file you create. Your completed file should look similar to this: 5. Use the technics you learned in the module to complete the file, then complete the assessment questions using the file you create. Your completed file should look similar to this: Question 1 1 pts How many students failed with a grade of E ?.