Basic Fitting Top and One Piece Fitting Dress

2. CONTENTS
Flat Pattern Making
ClassicTop – From BasicSloper.
ClassicClose fitting One-Piece Dress Pattern - From Basic Sloper.
•
•
•
4/18/2020ProfSG.Babu

3. Flat Pattern Making
Manipulating previously developed
sloper patterns to create design
patterns
4/18/2020ProfSG.Babu

4. Flat Pattern Making
4/18/2020ProfSG.Babu

5. 4/18/2020ProfSG.Babu
ClassicTop – Pattern

6. Flat Pattern Making
4/18/2020ProfSG.Babu
Classic Shaping ofWaist

7. Flat Pattern Making
4/18/2020ProfSG.Babu
Classic Shaping ofWaist
1 cm down
JoinCF to CB with aCurved
Line

8. Flat Pattern Making- Introduction
ProfSG.Babu
1 cm Down
Curved line from CF to CB
Note: 1.5 -
2 cm For
large sizes

9. Flat Pattern Making
4/18/2020
Classic Shaping ofWaist

10. Flat Pattern Making
4/18/2020
Classic Shaping ofWaist
1) Back Dart = 3.5 cm. (1.75 cm on either
side of the dotted line at 18. Shape up
to 17.
2) From 33 Move 1.5 cm inwards to Center
Back (CB) . Join 32 to this new point
and shape side seam to waist.
3) Front Dart = 4.5 cm. (2.25 cm on either
side of the dotted line at 24. Shape up
to .5 – 1 cm below 26.
4) From 33 Move 2.5 cm inwards to Center
Front (CF) . Join 32 to this new point
and shape side seam to waist.
STEPS OF CONSTRUCTION:

11. Flat Pattern Making
4/18/2020
Classic Shaping ofWaist

12. Flat Pattern Making
4/18/2020
Classic Shaping ofWaist
A ClassicTop of
Length up toWaist.

13. Flat Pattern Making
4/18/2020
Classic Shaping ofWaist
A ClassicTop of
Length up toWaist.
Back
Front

14. Next Class
4/18/2020ProfSG.Babu
Close Fitting
one-Piece Dress – Pattern

15. 4/18/2020ProfSG.Babu
Close Fitting
one-Piece Dress – Pattern

16. Flat Pattern Making- Introduction
Shaping of Waist
4/18/2020ProfSG.Babu
Ø

17. Flat Pattern Making- Introduction
Shaping of Waist
4/18/2020ProfSG.Babu
1) Trace the Close fitting block up to Hip
line.
2) Draw classic waist shaping ( as
discussed before).
3) Except Moving down by 1 cm and
shaping with a curved line
4) Marks Point 1,2,3,4.
Ø
STEPS OF CONSTRUCTION:

18. Flat Pattern Making- Introduction
Shaping of Waist
4/18/2020ProfSG.Babu
1) Trace the Close fitting block up to Hip
line.
2) Draw classic waist shaping ( as
discussed before).
3) Marks Point 1,2,3,4.
Ø
STEPS OF CONSTRUCTION:
Close Fitting Block
Up to Hip line
Waist Shaping

19. Flat Pattern Making- Introduction
4/18/2020ProfSG.Babu
1) Square Down from 1 – 5 and 4 – 6.
1-5 is full length of the Dress, Square
Across.
2) 7 is midpoint between 5 and 6, Square
up to meet the Hip line and mark it 8.
3) Join 2-8 and 3-8 with curved lines.
4) Extend Back dart by 13 cm and front
dart by 11 cm.
STEPS OF CONSTRUCTION:

20. Next Class
4/18/2020ProfSG.Babu
Dart Manipulations

21. 4/18/2020ProfSG.Babu