In construction, Mechanical, Electrical, and Plumbing engineering. These three fields cover the central systems that make buildings habitable for humans.
Reducing the negative impact on the environment and human health, thus improve the performance during a building’s life cycle. Careful consideration is given to water, energy, building material and soild waste.
3. Mott MacDonald
1 Lower Energy Consumption
Strategies to use daylighting Effectively
5
4 Use Sustainable Building Material
Better Water Management
2
Reduce Co2 Emissions
3
Agenda
4. Mott MacDonald
In construction, Mechanical, Electrical, and Plumbing
engineering. These three fields cover the central systems
that make buildings habitable for humans.
Reducing the negative impact on the environment and
human health, thus improve the performance during a
building’s life cycle. Careful consideration is given to water,
energy, building material and soild waste.
Introduction
5. Mott MacDonald
15%
25%
32%
In a commercial building, water account for
15%, lighting accounts for 25% and HVAC
symptoms account for another 32% of energy
use. Keeping sustainable MEP design in mind,
it’s possible to optimize the efficiency of these
systems to lower costs and reduce
environmental impact.
Lower Energy Consumption
6. Mott MacDonald
Water preservation is another strategy
that helps control the environmental
impact of a new building. Installing low-
flow fixtures can bring down water
consumption by 40%. Some buildings
include Rainwater harvesting systems to
be used for irrigation or toilet flushing.
Water Management
7. Mott MacDonald
Use Fixture which meet EPA(Environmental
protection agency), Water efficient product
and HET(High efficiency toilet). These
products are combined with sensible water use,
saves money and helps keep our reserves at
sustainable levels.
Water Management
8. Mott MacDonald
Rainwater harvesting is best
water management sytem where
the natural rainwater can be used
for irrigation, toilets and car
washing.
Water Management
9. Mott MacDonald
Using renewable source of energy
like Solar, wind and Geothermal
sources help to reduce the carbon
footprint in turn totdal cost.
Reduce Carbon Footprint
10. Mott MacDonald
Solar energy is one of the excellent way to save enery, it
not only generate power in the form of lighting, but also
help to generate heat for solar water heaters.
Reduce Carbon Footprint
11. Mott MacDonald
A geothermal heating and cooling system
(also known as an HVAC system)
Reduce Carbon Footprint
12. Mott MacDonald
Wind is also converted into energy by using wind millers
which is in the for of electricity.
Reduce Carbon Footprint
13. Mott MacDonald
The sustainablity can be achieved by using sustainable
building material. For example, using double-glazed
windows can help improve insulation. Light-colored roofs
reflect heat, thus reducing the load on air conditioners.
Even building orientation can help minimize the effect of
heat sources.
Use Sustainable Building
Materials
14. Mott MacDonald
Light-colored roofs reflect heat, thus reducing the load on
air conditioners. Even building orientation can help
minimize the effect of heat sources.
Use Sustainable Building Materials
15. Mott MacDonald
double-glazed windows can help improve insulation.
This design provides excellent insulation by trapping
heat inside during winter and preventing heat from
entering during summer.
Use Sustainable Building
Materials
16. Mott MacDonald
Optimizing a building's orientation and layout involves
placing windows strategically to capture maximum natural
light.
Strategies for Effective
Daylighting
17. Mott MacDonald
Utilize daylight sensors to dim or turn off artificial lighting
when sufficient natural light is available, reducing energy
consumption.
Strategies for Effective
Daylighting
18. Mott MacDonald
Reduce energy consumption for lighting by up to 75%.
Enhance productivity and concentration levels.
Improve immunity and mental health.
Decrease building maintenance costs.
Promote sustainability and reduce the carbon
footprint.
Strategies to use
Daylighting Effective