Connectivity settings with Galileo, getting started with Wyliodrin and Intel IoT Cloud Analytics.

1. Setting up Connectivity with Galileo

2. Best to power off Galileo first 
Ref.: https://software.intel.com/en-us/internet-connectivity-galileo

3. Best to power off Galileo first 
Ref.: https://software.intel.com/en-us/internet-connectivity-galileo

4. Open the terminal as you seen before – putty,
goSerial, minicom...

5. connmanctl
root@galileo:# connmanctl
connmanctl> enable wifi
Enabled wifi
connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
*Ac Wired ethernet_984fee014cb8_cable
wifi_0cd29296991b_hidden_none
intel-iotroadshow wifi_0cd29296991b_696e74656c2d696f74726f616473686f77_managed_psk
FREEBOX_2C14_NX wifi_0cd29296991b_46524545424f585f324331345f4e58_managed_psk
Ref.: https://software.intel.com/en-us/internet-connectivity-galileo

6. Continuing...
connmanctl> agent on
Agent registered
connmanctl> connect
wifi_0cd29296991b_696e74656c2d696f74726f616473686f77_managed_psk
Agent RequestInput
wifi_0cd29296991b_696e74656c2d696f74726f616473686f77_managed_psk
Passphrase = [ Type=psk, Requirement=mandatory ]
Connected
wifi_0cd29296991b_696e74656c2d696f74726f616473686f77_managed_psk
Passphrase? iotparis
Ref.: https://software.intel.com/en-us/internet-connectivity-galileo

7. To check connection:
connmanctl> quit
root@galileo:# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
…
3: wlp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000
link/ether aa:bb:cc:dd:ee:ff brd ff:ff:ff:ff:ff:ff
inet 192.168.0.2/24 brd 192.168.0.255 scope global wlp1s0
inet6 fe80::ed2:92ff:fe6d:f1d2/64 scope link
valid_lft forever preferred_lft forever

8. Intel Cloud Analytics
September 28, 2014

9. 9
Store, visualize and
analyze
your IoT data in the cloud
Keep track of your devices
Graph data from your devices
Invite others to see your device
data
Send messages to your devices
Create rules to notify you when
your data gets interesting
Download your data for further
analysis

10. Links
10
The Web Site – www.enableiot.com
Getting Started - software.intel.com/iot
Getting started Guides / Intel IoT Cloud Analytics Guide
The API – github.com/enableiot/iotkit-api

11. Visual Programming (Blocky)/Wyliodrin

12. http://www.wyliodrin.com
Create account – anonymous won’t work
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

13. Add a new board
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

14. Set up the board - select Intel Galileo
Please name your board and select Intel Galileo and press Next
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

15. Set up networking
Cable (Ethernet) WiFi
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

16. Download wyliodrin.json
Your SD Card is already with the Galileo Image, so all you need to do is go to Step 3, download (1) wyliodrin.json.
Power off your Galileo, remove the SD card and place it in your computer. Then (2) write it on the root of the SD Card.
Make sure the name is exactly wyliodrin.json
1
2
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

17. Restart Galileo; it should appear online after a few
minutes
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

18. Create new application – select Visual Programming –
Led Blink
Ref.: https://software.intel.com/en-us/getting-started-for-visual-programming-wyliodrin-galileo

19. Replace “Set On Led on pin 0” for “Set onboard LED
On” (on Boards Specialized -> Intel Galileo)

20. Grove kit sensors are on Peripherals - Grove