4. Molding (or mould)
A strip of material (such as plastic, glass or metal) with some design or
form that is used on various decoration rigid frame. This frame called
mold or mould.
Molding
5. Sand Casting
Sand casting is generally used in casting
process, handles expandable sand molds to
complex pattern and parts that can be
manufactured any alloy.
The sand mold must be exploded in order to
extra part of material remove the part is called
the casting. One of the main benefit of sand
casting typically low product budget.
6. Sand Casting
Sand casting to use it:
Design pattern or non-symmetrical parts
Heavy components
Parts with internal pattern
Liberal tolerances
7. Permanent mold casting
You can use sand casting but not flexible with use of various design, with need
lower cost production rate.
A larger production range, permanent mold castings generates cost efficient
manufacturer parts.
Also complex part easily being favored by use of permanent molds.
8. Investment casting
Benefits :-
Many positive aspects of investment casting process including cost efficient, freedom
for design, liberal tolerances, better surface finishes, and time savings.
Investment casting
9. Lost wax casting
Lost wax casting is technique that been used for ancient time. It uses on jewelry
and small parts.
It can be built of wax pattern itself, the direct technique or wax duplicate of a model
that not need to be of wax.
10. Die casting
Now discuss about die casting, it is a process for manufacturing metal
components by forcing molten metal part high temperature into a die cavity.
The die casting procedure generally build components using primarily non-ferrous
metals, such as aluminium, copper, zinc and magnesium.
11. Centrifugal casting
One of the high quality casting method of centrifugal that delivers casting standard
material soundness and technology most preferable on airways engine compressor,
chemical tubes, defense products and other high reliability apps.
12. Glass casting
Glass casting is the technique in which glass device are cast by directing molten glass
into shape where it harden. The method has been used in ancient time in Egyptian
period.
13. Slipcasting
The last types of slipcasting, it can be useful for manufacturing several of one object
and to produce casts that are not useful on the inside. In this casting material are
needed plaster mold, rubber and plastic mold.
14. Approvals from world Reputed Company
ISO 9001 : 2008 AS 9100 Rev. C Nadcap Certified