1. Curriculum Vitae
ENG. WALID IBRAHIME KHALIL MADI
1. Personal Details
Address: 72 Ahmed foad nour st.el ibrahimia, Alexandria, Egypt
Tel:(+203)3599988 – Mobile:(+2)01000003375&(+2)01203787373
Email: walid_madi2003@hotmail.com
Birth Date: 14th
of March 1982
Nationality: Egyptian
Religion: Muslim
Position: Electrical Engineer
Graduation Year: 2004
Marital Status: Married
Military Service: Done from 13/10/2004 to 1/12/2005
2. Academic Education
M.Sc from Electrical power and machines department, faculty of Engineering, Alexandria
University, Egypt.
Title of Thesis: "Design and Assessment of Cathodic Protection in Petrochemical Industries Using
Hybrid Renewable Energy Sources"
Year of graduation: 2010
Grade: Excellent
Supervisor: Dr. Prof. Ahmed A.Hossam-Eldin
B.Sc. from Faculty of Engineering, Electrical Power and machines Department, Alexandria
University, Egypt.
Overall Grade: (Very Good with Degree of Honour 81.4%)
Year of graduation: 2004
Graduation Projects grade: Excellent
3. Skills and Software Packages
• Use and application of personal computers (ICDL international computer driven license).
• Use and application of microprocessors, microcontrollers and Pic’s.
• Use and applications of PLC'S (Merlin Gerin, ABB and Siemens).
• Use and applications of Inverter, Soft Starter, and Speed control drives.
• Design and implementation of electronic circuits.
• Use and application of AutoCAD
• Use and application of Matlap.
• Simulink.
• Orcad Pspice.
• Electronic work bench (EWB).
• Philips lighting software "Calculax and dialux".
2. 4. Practical Trainings
-Aug-Oct 2004: Computer maintenance and Programming (3 months) as a training course from the
council of ministers.
-Dec 2004 to Feb 2005: Automatic control and Electrical connection (3 months) as a training course
from the council of ministers.
-July 2003- Aug 2003 : Ameria Petrolume Company.
-Aug 2003- Sep 2003 : Abu Kir Fertilizers Company.
-June 2002- July 2002 : Sidi kerir power plant.
-Training in factories for two weeks (25/2/2006 -9/3/2006).
-Training in Egytech El-Sewedy Cables factory from (20/5/2006 to 30/5/2006).
-Training in design, testing and maintenance of cables in Egyptian Society of Engineering.
-Trainings in Alexandria Electricity Distribution Company:
Sector of Protection and measurements.
Training in maintenance and testing of low and medium voltage networks and earthing
systems.
Training in maintenance and testing of Power Ttransformers.
-Trainings in OGS (Oil & Gas Skills):
Electrical Motors and Transformers; Protection, Testing and Maintenance.
Hazop & Hazard Analysis.
-ISO 9001:2008 Internal Audit &awareness.
-Lean Six Sigma Yellow Belt.
-Bearing Technology & Maintenance SKF Egypt.
-Presentation and communication skills.
-Time management.
-UPS training course in BORRI factory , Italy.
5. Work history
Dr. Prof. Magdy M. El Attar
Consultant office Electrical Engineering
Department chairman - Faculty of
Engineering – Alexandria University
2 years
Junior Electrical Design Engineer
Annual performance report Excellent
Job description
-Perform light fixture and device layouts.
-Perform branch circuiting design on plans and schedules.
-Perform fire alarm initiating and notification device layouts.
-Coordinate electrical service requirements for equipment of other trades and consultants via drawing
and cut-sheet inspection.
-Perform calculations for projects, such as lighting illuminance, electrical loads, equipment selection
and sizing, feeder sizing, energy calculations, voltage drop calculations, short circuit/coordination
studies, etc.
-Perform pre-design site surveys to record existing conditions and determine project constraints for
new design.
-Perform site construction verification visits to determine compliance with construction documents
and resolves design issues during the construction phase.
-Responsible for Code Compliance of designs and tasks.
3. Alexandria Electricity Distribution
Company
Protection and measurements Sector
1 years
Junior Electrical Power Engineer
Annual performance report Excellent
Job description
- Installation and maintenance of low and medium voltage switch gear and protection devices.
-Calibration of protection and measurements devices.
-Commissioning and test for the new switch gear.
-Coordinate and design new protection or upgraded systems.
TWMA Egypt Oil Services
S.A.E. Integrated Drilling Waste
Management
6 months
Senior (shift leader) Operator and Maintenance Electrical Engineer
Job description
-Maintenance and operate of electrical power equipment and control systems.
-Mounting and dismounting of motors bearing and the periodic motor greasing.
-Record of all stock and supplies for the electrical equipment.
-Test the Samples in the lab and record the results.
Philips Electronics Middle East &
Africa, Lighting Department
1.5 years
Senior Electrical Lighting Designer and Sales Engineer
Job description
-Design and Perform light fixture by software lighting programs"Calculax and dialux" and
calculations project lighting total load.
-Preparing specification for tenders and the required requisitions.
-Supervision of construction and installation of lighting fixtures and the implementation of the design.
-Lighting technical support.
6. Current job
SIDPEC "Sidi Kerir Petrochemical
Company"
From 29/4/2008 up to date
Head of sector of Operator and maintenance Electrical Engineer
Annual performance report Excellent
4. Job description
-Design, develop and maintain electrical power components and control systems.
-Carry out the industrial controls, conveyance systems, sub-stations, motor control centers, power
distribution panels, electrical starters and variable frequency drives (VFDs).
-Carry out the replacing, adjusting, altering and maintaining cables, holders, adaptors, transformers
and any electrical equipment.
-Carry out mounting and dismounting of motors bearing and the periodic motor greasing.
-Fitting new parts and making sure equipment is working correctly.
-Designing maintenance strategies, procedures and methods.
-Carrying out routine scheduled maintenance work and responding to equipment faults.
-Writing maintenance strategies to help with installation and commissioning guidelines.
-Monitoring and controlling maintenance costs.
-Preparing specification for tenders and the required requisitions.
-Carry out technically reports about offers from vendors.
-Inspection and witness for accepted equipment and follow up it.
-Carry out the required tests for electrical equipment.
-Carry out electrical installation, commissioning, start up than handover for operation.
-Controlling maintenance tools, stores and equipment and ensuring there is continuous cover in
case of breakdowns.
-Carrying out quality inspections on jobs.
-Improving health and safety policies and procedures.
-Perform energy audit and recommend alternative sources of energy and help the organization to
reduce energy costs.
-Training, development and supervision of the junior maintenance Staff.
7. Languages
Mother Language: Arabic.
English: Excellent command (TOFEL Score (548))
8. Notes
I am physically capable of heavy manual work or outdoor work and I have no disabilities.
I don’t mind travelling during my work to any place.
References are available upon request.
"I hope that my qualification could meet your criteria to be a member in your esteemed
organization"
THANK YOU