3D Modeling and Texturing Walkthrough

•Descargar como PPT, PDF•

8 recomendaciones•6,285 vistas

The document provides an overview of the modeling and texturing process for a 3D model. It discusses using references to help with scale, dimensions, and later textures. For modeling, the objective was low poly count with multiple approaches. Texture creation involved unwrapping the 3D model and flattening it onto a 2D plane with overlapping to keep the texture size small. The final steps were attaching models to one mesh, applying the final texture, and exporting to a game engine for rendering with a total poly count of 2400.

Educación Estilo de vida Tecnología

Modeling and Texturing Walkthrough By: Martin Reimer http://www.linkedin.com/pub/martin-reimer/1/29b/950

References ,[object Object],[object Object],[object Object],[object Object]

Modeling ,[object Object],[object Object]

Texture Creation ,[object Object],[object Object],[object Object]

Final Texture ,[object Object],[object Object]

Final Steps ,[object Object],[object Object],[object Object]

Más contenido relacionado

La actualidad más candente

Introduction to AR with Unity3D

Andreas Blick

3D PRINTING

KentAnderson43

Introduction to 3D Modelling

Cosimo Orban

Introduction to blender

Carlos Cámara

3D Graphics & Rendering in Computer Graphics

Faraz Akhtar

3 d printing

Saumya Ranjan Behura

3D modelling and animation using Autodesk maya

Parvesh Taneja

3D printing

Vinny Chweety

3d printing (3D printer)

MOUMNI1015

3d printing

nichakul

3D Printing

Jhelum

3D printing technology

3d printing

2D & 3D ANIMATION

3D Modeling

Introduction to 3D and Modeling

Cruz4D

3D Printing Overview

think3D Voice

3D Animation Process and Workflow

Gridway Digital

3 d modelling

Irshad Ansari

3D Technology

Shashiprabha Rathnayake

La actualidad más candente (20)

Introduction to AR with Unity3D

3D PRINTING

Introduction to 3D Modelling

Introduction to blender

3D Graphics & Rendering in Computer Graphics

3 d printing

3D modelling and animation using Autodesk maya

3D printing

3d printing (3D printer)

3d printing

3D Printing

3D printing technology

3d printing

2D & 3D ANIMATION

3D Modeling

Introduction to 3D and Modeling

3D Printing Overview

3D Animation Process and Workflow

3 d modelling

3D Technology

Similar a 3D Modeling and Texturing Walkthrough

Environment creation using a modular approach / Carlos Casals (Ten Square Games)

DevGAMM Conference

Layar Tutorial - 3D Content Creation Tips & Tricks

Ronald van der Lingen

Work In Progress

samluk

Laureate Online Education Internet and Multimedia Technology © All right reserved, 2000-2008. The Internet and Multimedia Technology module, in all its parts: syllabus, guidelines, lectures, discussion questions, technical notes, images, labs, projects and any additional material is copyrighted by Laureate Online Education B.V. Module: MSC MD (INTMMT) Seminar 3 Bitmaps and Colour Introduction We will turn our attention to Bitmaps and Colour during this Seminar. As we did in Seminar 2, we will again recommend some applications and encourage you to experiment. Bitmapped images have none of the complexity of 3D graphics and yet they are the final output from a 3D system. Often the 2D image desired will first be created in 3D and then, after the perspective transformation is applied and it becomes 2D, modified and enhanced. Let us take a look at some ideas associated with Bitmaps. We start with the resolution or measure of the granularity of the image. It is a common error to assume that an image having 640 by 480 pixels on the screen cover s only that number of phosphor dot triads on the face of the monitor. A screen may state it provides so many dots per inch as its resolution. This is a measure of the manufacturing quality. Depending on the size of the screen we will have a different number of dots per pixel for a given computer resolution. It is also rather short sighted to keep an image at a small resolution since it will look very ‘blocky’ if enlarged or viewed at a greater resolution than originally stored. This gives rise to large files being kept just in case we need the resolution! One obvious way around this is to compress the image. Compression schemes are considered to be of two types; Lossy and Lossless. With lossless compression we can always regain the original quality whereas with lossy compression we sacrifice some aspect of quality depending on the application. When dealing with multimedia and the Internet we are very concerned to obtain the best compression ration for a given quality of service (QoS). The compression ratio is given by; Compression Ratio = Uncompressed file size Compressed file size Most compression schemes rely on taking advantage of redundancy in the data (in our case, the stream of pixels which make up the image). This takes many forms. If we examine one scan line of an image we will notice that many pixels 1 are the same colour so stating for example Red 100 times is wasteful. It is obviously shorter to store the value for red and its length. This is the basic idea behind Run Length Encoding (RLE). A simple compression related to colour is to appreciate that we do not need the full range twenty four bits can provide. If we sample the image for the 256 commonest shades then we can reduce the storage for colour by two thirds by sacrificing fine shading differences. A further approach is useful with video and makes use of the ...

Laureate Online Education Internet and Multimedia Technolog.docx

DIPESH30

1291 fa13 assign3_layered_drawings

NYCCTfab

basics-of-computer-graphics-ppt.pdf

HarshitTyagi91

Datt2500 week3

Joe Hambleton

class-viii.pdf

AbhisesSingh

Professional Photoshop Effects

elliotjaystocks

Photoshop

Azhagu meenatchi

Project report

AbhinavRawat47

Design project 2 brief sept 2015

Thomas Ting

Itd final project

Lau Hui Ming Belinda

Design project 2 brief sept 2015

luckygrass11

Design project 2 brief sept 2015 (1)

Christina Chua

Design project 2 brief sept 2015 (1)

liszee

Design project 2 brief sept 2015

Joeylau97

ITD Project 2A

GAERWA wEGFWEGWG

ITD ASSIGNMENT 2 BRIEF

Joeylau97

ITD project 2 Part 2 sept 15

Lau Hui Ming Belinda

Similar a 3D Modeling and Texturing Walkthrough (20)

Environment creation using a modular approach / Carlos Casals (Ten Square Games)

Layar Tutorial - 3D Content Creation Tips & Tricks

Work In Progress

Laureate Online Education Internet and Multimedia Technolog.docx

1291 fa13 assign3_layered_drawings

basics-of-computer-graphics-ppt.pdf

Datt2500 week3

class-viii.pdf

Professional Photoshop Effects

Photoshop

Project report

Design project 2 brief sept 2015

Itd final project

Design project 2 brief sept 2015

Design project 2 brief sept 2015 (1)

Design project 2 brief sept 2015

ITD Project 2A

ITD ASSIGNMENT 2 BRIEF

ITD project 2 Part 2 sept 15

Último

Unit 3 Emotional Intelligence and Spiritual Intelligence.pdf

Dr Vijay Vishwakarma

Fostering Friendships - Enhancing Social Bonds in the Classroom

Pooky Knightsmith

Basic Civil Engineering notes first year Notes Building notes Selection of site for Building Layout of a Building What is Burjis, Mutam Building Bye laws Basic Concept of sunlight ventilation in building National Building Code of India Set back or building line Types of Buildings Floor Space Index (F.S.I) Institutional Vs Educational Building Components & function Sills, Lintels, Cantilever Doors, Windows and Ventilators Types of Foundation AND THEIR USES Plinth Area Shallow and Deep Foundation Super Built-up & carpet area Floor Area Ratio (F.A.R) RCC Reinforced Cement Concrete RCC VS PCC

Basic Civil Engineering first year Notes- Chapter 4 Building.pptx

Denish Jangid

Application orientated numerical on hev.ppt

RamjanShidvankar

How to Manage Global Discount in Odoo 17 POS

Celine George

Salient Features of India constitution especially power and functions

KarakKing

Wizards are very useful for creating a good user experience. In all businesses, interactive sessions are most beneficial. To improve the user experience, wizards in Odoo provide an interactive session. For creating wizards, we can use transient models or abstract models. This gives features of a model class except the data storing. Transient and abstract models have permanent database persistence. For them, database tables are made, and the records in such tables are kept until they are specifically erased.

How to Create and Manage Wizard in Odoo 17

Celine George

How to Give a Domain for a Field in Odoo 17

Celine George

The basics of sentences session 3pptx.pptx

heathfieldcps1

Interdisciplinary_Insights_Data_Collection_Methods.pptx

Pooja Bhuva

Holdier Curriculum Vitae (April 2024).pdf

agholdier

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

Nguyen Thanh Tu Collection

General Principles of Intellectual Property: Concepts of Intellectual Proper...

Poonam Aher Patil

Towards a code of practice for AI in AT.pptx

Jisc

Accessible Digital Futures project (20/03/2024)

Jisc

Google Gemini An AI Revolution in Education.pptx

Dr. Sarita Anand

2024-NATIONAL-LEARNING-CAMP-AND-OTHER.pptx

MaritesTamaniVerdade

On_Translating_a_Tamil_Poem_by_A_K_Ramanujan.pptx

Pooja Bhuva

Sensory_Experience_and_Emotional_Resonance_in_Gabriel_Okaras_The_Piano_and_Th...

Pooja Bhuva

How to setup Pycharm environment for Odoo 17.pptx

Celine George