1. "Seeking a Challenging Position"
Personal Details:
Nationality : Egyptian
Place of Birth : Cairo – Egypt
Date of Birth : 1/1/1988
Marital Status : Married
Military Status: Expended
E-mail : a.m.diaa@hotmail.com & eng.ahmeddiaa@yahoo.com
Education
• Graduation Year: Summer 2009
• Major : Power.
• Grade : Good.
• Project Grade : Excellent.
• Project Name: Energy saving in oil wells distribution line using variable speed
drive by using.
1- Programmable logic controller.
2- Variable speed drive.
Comment: Programmable logic controller used in company
between the mechanical method (by pass shut off valve) and
electrical method (variable speed drive) which consuming less
energy than the mechanical method in case of high load
requirements.
• University: Faculty of Engineering Helwan University
• Experience:
QARUN Petroleum Company (2010 to Present)
o Field : Electrical ESP Engineer& Maintenance Engineer at
Western Desert (4 Years)
o Cairo office : ESP Application Engineer (Address: 1 Road 315-
New Maadi, Cairo, Egypt )
Plan, supervise and coordinate all Maintenance activities, electrical work
shop repairs, installation integrity, reliability, availability and maintainability
of electrical and control equipment are optimized to achieve the production
targets
Assist in the successful commissioning and flawless start-up and normal
operational activities through the development of electrical equipment
inspection and maintenance techniques
Ensure plant integrity through the development and implementation of
electrical inspection, maintenance strategies and acceptance standards that are
based on applicable international standards and statutory requirements
Establish preventive maintenance (execute under GMS)activities and ensure
spare parts, special tools, consumables and equipment availability Prepare
1
Ahmed Mohamed Diaa
Address: 6 October – 8th
District- Area No (2)-Block 59
Phone Number: (02) 38896795
Mo. Phone: +20100 4774231
2. the work orders, material issue, purchase requisition, and maintain the stock
level of spares of electrical equipment profile in Min & Max.
Develop and safely execute small projects with industry standards (National
Electrical Code (NEC), (IEC) standards & API) and reliability issues on time
and within the approved budget, integrate new facility installations with
existing electrical systems, commission and connect it with the existing
electrical network, considering the unknown performance characteristics of
the integrated system and equipment, Ensure compliance with the company's
QSHE policy and guidelines for electrical activities
Improving and updating the electrical drawing also review the procedure and
instruction of electrical maintenance document system
Coordinate all electrical changes within the area maintenance team to assure
high integrity, uniformity of design, and standard and practice. This includes
assuring that as-built drawing, document, procedures, work instructions and
database are maintained
Ensure that electrical documentation, calculations and data are kept up-to-date
Support the area maintenance teams with advice and resources for problems
that require specialist competencies not present in the area teams
Power Generation & Distribution
Electrical maintenance and troubleshooting for MCC (low voltage motor
control center), medium voltage 3.3KV circuit breakers, overhead
transmission line (11KV), power transformer(step up, step down & tap
changer), Emergence Diesel Generator, power cable,……etc.
ESP (Electrical Submersible Pumps)
• Perfect knowledge in ESP design by Design rite (Schlumberger
Software) , Autograph (Centrilift software) & sub pump software
• Attending Installation and Pull out of ESP equipment with Centrilift,
weather ford and Schlumberger Crews.
• Carrying out DIFA at Centrilift, REDA and Weatherford Workshops.
• Commissioning, startup of VSD’s (GCS Electro speed II Baker , Borets ,
Schlumberger, Mitsubishi )
• Commissioning, & troubleshooting of ESP motor controllers (vortex,
KO95, uniconn, instruct & Commander III).
• Carrying out Installation and pull out for centrilift equipment.
• Installation and pull out for zenith and well LIFT sensors.
• Troubleshooting E.S.P wells about 350 wells.
HPS (Horizontal Pump system)
• Commissioning, start up and troubleshooting of low and medium
voltages Benshaw soft starters
• Commissioning, & troubleshooting of schlumberger and wood Group
HPS`s
2
3. Diesel Generator:
• Disassembly, assembly & troubleshooting for generators (caterpillar)
series 3406C, 3412C and module SR4
• All troubleshooting with (EMCP II & EMCP II+) Electronic modular
control panel
• Working with AVR (VR3, VR6 & R448) automatic voltage regulators
models.
Extra Qualifications:
1- Training at The Arab Contractors
2- PLC Course at helwan faculty
3- Design of electrical works for projects at (Avit)
4- Variable speed drive courses at ( Schlumberger – baker Hughes- borets)
5- ESP installation & pulling courses & troubleshooting at baker &
Schlumberger
6- Cathodic protection courses at OGS
7- ESP design courses at Schlumberger.
8- Frac. Course at Schlumberger
9- English Courses at British Council (conversation)
10- Studying MBA at the American university
Personal Background
o Independent active, young, male, Athletic with good health, highly
organized.
Languages:
o Arabic: Mother language.
o English: Fluent.
Computer Skills:
o Excellent practicing & working skills of windows & Microsoft Office
& Excel.
Skills and Abilities:
o I am a highly motivated, enthusiastic and hard working person.
o I can work as a valuable member of a team and consulting with other
staff members on relevant issues.
o Ability to work under stress.
o Ability to work anywhere, outside or inside my Country.
o Willing to gain experience.
o Ability to work full day under pressure 24 hrs.
o Fast learner can deal with any unexpected problems & gust complains.
3