Construction of a boccia chute

1. CONSTRUCTION
OF A BOCCIA
CHUTE.
MATERIAL FACILITATOR OF THE ACTION

2. 2
STAGES OF DEVELOPMENT OF A BOCCIA CHUTE
The steps for the construction of the chute are:
1. Tick plywood area where they will go the guides using a pencil.
Image 1
2. Mark the holes in the plywood, previously measured.
Image 2

3. 3
3. Place White glue between the guides and the plywood and secure with
locking pliers.
Image 3
4. Screw the plywood to guides using the screwdriver.
Image 4

4. 4
5. Stand the Wood using sandpaper.
Image 5
6. Sawing vertical corner of the timber base to the hinge bases can be
used without any problems.
Image 6

5. 5
7. Apply reinforcement in the vertical wooden base so that the hinge has a
greater range of motion. Such reinforcement is done with the use of a
wooden block.
Image 7
8. Mark the different heights of the chute.
Image 8

6. 6
9. Run drilling them.
Image 9
10.Attach the base of the chute with the use of brackets.
Image 10

7. 7
11.Place the slip material base to avoid damage and prevent it can slide.
12.Paint the chute. We used green and yellow colours.
Image 11
13.Join the parts.
Image 12

8. 8
MATERIALES Y HERRAMIENTAS NECESARIOS
MATERIAL TOOLS
Screws Screwdrivers
Plywood Visa Grips
Guides Sandpaper
Whitetail Brace
Pencil Hammer
Hinges Subway
Squads Saw
Drill
Cat
Wood painting