8. cabinetfaceframe
cabinetdoor
Cabinet Side
wood blocking
(not provided)
ceiling
crown molding
moves up/down
along ceiling
2"
AC
M
8
CTM8
UF396
¾"
3"
Crown Molding
ACM8 | CTM8 | UF396
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
9. CTM8
1½"
CabinetFaceFrame
CabinetDoor
¾"
Light Rail
CTM8 | Horizontal
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Cabinet Side
10. CabinetFaceFrame
CabinetDoor
Base
Cabinet
Side
OGP8
wood blocking
(not provided)
Floor
Void
Toe Kick
Area
¼"
4¾"
Floor
3½"
4½"
Decorative Toekick
OGP8
ph: 800.576.7930 | fax: 877.675.4394 | customerservice@cliqstudios.com
CliqStudios.com®
, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
11. CliqStudios.com, LLC reserves the right to change, modify or discontinue programs at any time v 1-2015
Because walls are usually not straight, level, square, flush or plumb we recommend the following
accessories to accommodate construction space imperfections for the floor, wall or ceiling and may
have included them in your order to finish your space.
Attention:
recommended accessories
for your design
96" 4½"
UF1.542 1½" 42"
UF1.596 1½" 96"
UF342 3" 42"
UF336 3" 36"
UF330 3" 30"
UF396 3" 96"
UF642 6" 42"
UF696 6" 96"
A B
A
B
¾"
96"
¾"
¾"
IQR8
▪ Solid hardwood
▪ Bold line represents finished edge
¾"
96"
¼"
SM8
▪ Solid hardwood
▪ Bold line represents
finished edge
▪ Solid hardwood
▪ Front & sides finished
back
wall
floor
side
wall
back
wall
floor
gap created
by filler between
cabinet & wall
Inside Quarter Round is more than a decorative accent.
It is installed after the flooring and is primarily used to
cover the gapping resulting from shims to level cabinets.
Quarter Round can also help cover up gaps in the floor -
especially with tile.
side
wall
back
wall
floor
cabinet
side
floor
back
wallside
wall
cabinet
side
FILLERS
Fillers are used to “fill” the gap between a wall and the
end run of cabinets, and sometimes between cabinets.
Fillers can also be used horizontally for decorative
molding applications. Field install and trim to width/height.
Note: Fillers also are used to provide space between
cabinet and wall for proper door swing operation to
provide cabinet access, especially with decorative
hardware and roll out trays
BTK8
▪ Plywood veneer w/ engineered core
▪ Bold line represents finished edge
Base ‘Toe Kick’ is used as a panel to cover up
the gapping created by the placement of
cabinets. It is applied to the recessed area
where the cabinet meets the floor.
SM8, or Scribe molding,
is used along the wall when
cabinets/fillers meet a non-plumb
wall to hide gapping between the
cabinet and the wall.
cabinet
side