1. REESHU ANAND
#S.No.176/1/2/1 Golande Park, Nr. Joshi, Wakad, Pune-27
Mob: 91-8983210841
Email: reeshua@yahoo.in
Title Engineer - Electrical
Work Experience 4 years and 10 months
Skills MS Office, ERP (Enterprises Resource Planning), AutoCAD
Current Organization CB Richard Ellis, Pune.
Designation
Department
Sr. Project Coordinator
M&E Dept.(Design,Execution, Planning & Estimation)
Industry Construction/Electrical.
Highest Degree Held B.Tech in Electrical & Electronics, Bharath University-2010.
Objective To attain a challenging position in a high profile team and thus maintain a long-term association with an
organization that requires and demands my cross-functional skill, experience and knowledge in Projects.
Career Summary Graduate in Electrical & Electronics Engineering with 4+ years of experience in industry. Results oriented
approach in leading projects and collaborating with high performance teams.
Professional
1) Sr. Project Coordinator : From 15-06-2014 to Till Date
CB Richard Ellis, CBRE Inc.
Project: PTC Software (India) Pvt. Ltd, Pune and Ruby Hall Clinic - Hinjewadi
Job Profile & Key Role:
• Execution of all Electrical, HVAC and Fire and Security Services
• Electrical and Fire Panels Testing and Commissioning
• CCTV, FAS, ACS, PAS looping wiring, Testing and commissioning
• Designing of drawings for Electrical and Fire Security
• Load calculation and Load testing for panels and UPS
• Indoor and outdoor units commissioning and testing for HVAC, CFM calculation and execution for SA and FA ducting.
• Battery Load testing for UPS
• Billing for MEP services, with as built drawings
• Control project's Cost, Time and Quality by guiding the sub-ordinates' and Contractor's personnel efficiently. To handle all
changes as instructed by the Owner and coordinate with project stakeholders for flawless implementation.
• Chiller plant, Boilers, Heat Pumps and Jet Motor installation and cable calculation
• Fire Fighting, Sprinkler, Hydrant Pumps, Jockey pumps, Diesel Pumps and Suction Pumps commissioning.
• HT work and LT work execution
• Execution of M.E.P services (Electrical, Lift, Plumbing, Firefighting, water supply, sewerage, Home automation etc.)
• Checking of MEP drawings, coordination with architect, and contractor for same.
• Preparation of B.O.Q's (Bills of quantities).
• Raising P.R (Purchase Requisition) in the SAP.
• Coordination with liasioning consultant in respect to electrical, fire and water supply in concern dept. Like MSEDCL, MADC,
Fire Dept. Electrical Inspector, etc.
• Preparation of weekly report in respect to all M.E.P related services.
• Site inspection as per the drawing.
• Attending the weekly review meetings on site.
• Updating the M.E.P data on Ms-Excel.
• Co-ordination with MEP contractor for progress of work.
• Preparation of MEP drawings. As per the site requirement
1

2. REESHU ANAND
#S.No.176/1/2/1 Golande Park, Nr. Joshi, Wakad, Pune-27
Mob: 91-8983210841
Email: reeshua@yahoo.in
2) Electrical Engineer : From 02-12-2013 to 30-05-2014
Gera Development Pvt. Ltd., Pune.
Project: Isle Royale – Bavdhan, Pune.
Job Profile & Key Role:
• Executing Electrical and Mechanical Work at Site
• Preparing Bill of Quantity, Measurement Sheet and certify the Bills of contractors through ERP
• Power and Lighting Load determination on the basis of actual connected equipment with appropriate demand / diversity factor as
per recommended standards
• Preparation of reports concerning the progress of each project in meeting established cost and schedule targets and other contract
commitments and insures that action is taken to correct off-standard performance and achieve contractual obligations.
• Rate Analysis of Quantities and costing of Project.
• As Built Electrical Drawing Designing as per site
3) Executive Engineer : From 09-10-2012 to 30-11-2013
Sahara Prime City Ltd., Pune.
Project: Sahara City Homes, (Nagpur, Indore & Ahmedabad).
Job Profile & Key Role:
• Tendering and costing estimation of contract projects.
• Material procurement through ERP.
• Project Quantity analysis and Rate analysis.
• Preparation of Bill of Quantity.
• Conceptual project Budgets for Electrical, estimating and scheduling.
• Preconstruction activities and consultant coordination.
• Manage international Standards & Guidelines.
• Overall responsible for meeting contract requirements in terms of scope, performance, quality and safety related to Electrical.
Designing of Lighting circuits, Earthing layouts, Cable schedule calculations, Voltage drop Calculation, sizing for Transformer &
DG.
• Good Knowledge in AUTOCAD Drawings such as lighting layout, Power layout, Earthing Layout, Lightning Protection Layout,
Cable tray layout, Main SLDs & as built drawings.
• Prepare the issue of all important commercial, administrative or technical documents and correspondence related to Electrical.
• In charge of all contractual negotiations with the potential Electrical sub-contractors & suppliers
• Selection, approvals and appointment of Design Consultants and Main Contractors.
• Control project's Cost, Time and Quality by guiding the sub-ordinates' and Contractor's personnel efficiently. To handle all
changes as instructed by the Owner and coordinate with project stakeholders for flawless implementation.
• Monitor all productivity related activities of Contractors' staff and equipment on site
• Monitor and direct the quality assurance and quality control for works to be carried out as per project's contract quality
requirements, Master Program and track Critical Paths and Milestones.
• Execution of Electrical and Fire Fighting works at SCH- Nagpur.
4) Execution Engineer: From Jan 2011 to Oct 2012
Sobha Developers Ltd, Pune.
Project: Infosys Ltd, Software Development Block 10 & 11.
2

3. REESHU ANAND
#S.No.176/1/2/1 Golande Park, Nr. Joshi, Wakad, Pune-27
Mob: 91-8983210841
Email: reeshua@yahoo.in
Job Profile & Key Role:
• Executing the Electrical work according to GFC Drawings.
• Cost Tracking, Cost Estimation and Planning.
• Prepared the Electrical Load Calculation, Electrical Layout Drawings, Single Line Diagram & Conduit Routings Using
Auto CAD.
• Preparation of Bill by verifying Electrical Measurements.
• Sizing and Selection of Electrical Equipment’s like power distribution boards/ Lighting Switchboards, Transformers,
D.G Set, Bus Ducts, Cables, Earth Conductor etc.
• Attending Pre-bid meetings with Clients about the tender.
• Lighting calculation, design, selection of light fixtures, Load center Lighting, External lighting design, Percentage of
voltage Drop calculation.
• Power and Lighting Load determination on the basis of actual connected equipment with appropriate demand / diversity
factor as per recommended standards.
• Cable tray layout, Cable schedule, Bus duct details with section. Cable routing with section details.
• Rising of purchase requisition, work requisition, amendment of material and external MB Entry & MB certification in
ERP.
• Attending review meetings with Clients/contractors about the progress of Work.
• Executing Fire Fighting and Plumbing works in SDB-10.
3) Project Engineer: From July 2010 to Dec 2010
UKN Properties Pvt Ltd, Bangalore.
Project: Alila Hotels & Maria Residency.
Job Profile & Key Role:
• Executing the Electrical work according to GFC Drawings.
• Executing the Lighting of Building with latest Home Automation.
• Prepared the Electrical Load Calculation, Electrical Layout Drawings, Single Line Diagram & Conduit Routings Using
Auto CAD.
• Verifying of Bills by verifying Electrical Measurements of contractor documents.
• Sizing and Selection of Electrical Equipment’s like power distribution boards/ Lighting Switchboards, Transformers,
D.G Set, Bus Ducts, Cables, Earth Conductor etc.
• Attending Pre-bid meetings with Clients about the tender.
• Lighting calculation, design, selection of light fixtures, Load center Lighting, External lighting design, Percentage of
voltage Drop calculation.
• Inspection of Transformer and Panels to its manufacturing site.
Experience Obtained:
 Familiarization of AUTOCAD Software.
 Electrical layout preparation.
 Single line diagrams preparation & parameters.
 Tendering and costing estimation of contract projects.
 Preparation of Bill of Quantity.
 Prospective project management, planning and programming
3

4. REESHU ANAND
#S.No.176/1/2/1 Golande Park, Nr. Joshi, Wakad, Pune-27
Mob: 91-8983210841
Email: reeshua@yahoo.in
Education B.Tech (Electrical & Electronics)
University : Bharath University, Tamil Nadu,
Institution : Bharath Institute of Science & Technology, Chennai.
Division : 83% (Silver Medalist)
Year of passing : 2010
12th
(AISSCE) : 74.4% (CBSE)
10th
(AISSE) : 81.2% (CBSE)
Passport No. : L1971734
Languages known : English & Hindi.
Marital Status : Single
Father’s Name : Mukteshwar Prasad.
Skill Set AutoCAD : Upto 2012 Version
ERP (Enterprise Resource Planning)
Operating Platform : Windows 9x/Me/2000/7, MS DOS
I declare that the information given is true to the best of my knowledge and belief.
Yours Sincerely,
Reeshu Anand.
4