Maker Education can help kids to enjoy learning Science, Technology, Engineering and Maths (STEM). We at Fun2Do Labs - Open Education Project have published this presentation so that teachers can help their students to learn basics of science using project based activities. This will help teachers in imparting STEM education.
In this presentation we teach how you how to make a toy car with Arduino.
10. Motor Shield (L293D)
Motor shield is used for controlling the speed and direction of the motors
Fun Do Labs2
11. Arduino
Arduino is an open source electronics platform to develop electronic
prototypes & products
Fun Do Labs2
12. Arduino Software (IDE)
To communicate between software and hardware we need to use
Arduino IDE
Fun Do Labs2
13. How to Use Arduino with PC - 1
Connect PC with Arduino Type A/B USB cable
Fun Do Labs2
14. Arduino Software (IDE)
Open the Arduino IDE with code which is available in github
https://github.com/fun2dolabs/ArduinoForKids/tree/master/
Robotic_Car_L293D_MotorDriver
Fun Do Labs2
18. Attach tyres to shafts of dummy & geared motors
Fun Do Labs2
Step - 3
19. Fix Arduino & shield using double tape or some adhesive
Fun Do Labs2
Step - 4
20. Attach left motor wires to shield motor1 socket
Attach right motor wires to shield motor2 socket
(Refer to connection diagram)
Fun Do Labs2
Step - 5
21. Attach M1a & M1b shield wires to Arduino pin 8 & 9
Attach M2a & M2b shield wires to Arduino pin 10 & 11
(Refer to connection diagram)
Fun Do Labs2
Step - 6
22. Attach shield 5v wire to Arduino 5v
Attach shield GND wire to Arduino GND
(Refer to connection diagram)
Fun Do Labs2
Step - 7
23. Power the Arduino using battery & barrel jack connector
Fun Do Labs2
Step - 8