FONA LASER- THE LASER TO GO FOR
FONA Laser combines intuitive use with fantastic value for money. So you won’t have to think twice about launching laser dentistry in your practice. Take the next step today. Ask your dental dealer about FONA Laser.
FONALaser control unit including handpiece with integrated finger switch and cable with optical fibre/wire 01
Fibres 200μ 01
Fibres 320μ 03
Glasses(green PC Filter) 03(1 for Patient & 2 for Dentist & Assistant)
Fibre Cutter 01
Single-use tips (including one bending tool) 01 Set of 50 tips
Preinstalled complete FONALaser software including 12 x preset program possibility
Technical Data
Technical Data FONALaser
empty
General
empty
empty
Beam guide: Flexible quartz glass fiber
Display: Full color, graphical LCD touch screen
Cooling: Internal air cooling controlled by output
Temperature switch: Software temperature switch at 48° C
Door contact connection: Potential-free contact 5 VDC/20 mA (TTL)
Dimensions (W x L x H): 182 x 197 x 189 mm
Weight: approx. 1000 g incl. handpiece
Laser type: Diode laser
Wavelength: 970 nm ± 15 nm
Laser system: Class IV (according to IEC 60825-1)
Device classification: Class IIb (according to Council Directive 93/42/EEC)
Optical power: approx. 0.5 - 4.0 W (CW)
Optical peak power: approx. 7 W (diode)
Emission modes: CW (continuous wave),
chopped 1 Hz to 100 Hz,
peak-pulse approx. 1.5 kHz - 20 kHz
Pulse: repeated pulse
Pulse duration: Chopped mode: 5 ms - 0.5 sec.
Peak-pulse: 23 μs fixed
IP degree of protection: Laser unit: IP20
Aiming beam: 635 or 650 nm, max. 1 mW
NOHD: From the distal end of the optical fiber: 1.5 m
Optical fiber thickness: 200 and 320 μm, NA >= 0.22
Operation: Finger switch, with electronic access key
Nominal power input: 12 V DC 5.25 A max. 63 VA MPU63-105 or
15 V DC 6.66 A max. 100 VA MPU100-106
Insulation class: Class I, type B (according to IEC 60601-1)
Adapter: External, 100 - 240 VAC, 50 - 60 Hz
Power supply: The FONALaser may only be operated with the Sinpro MPU63-105 or Sinpro MPU100-106 power supply.
FONA LASER- THE LASER TO GO FOR
FONA Laser combines intuitive use with fantastic value for money. So you won’t have to think twice about launching laser dentistry in your practice. Take the next step today. Ask your dental dealer about FONA Laser.
FONALaser control unit including handpiece with integrated finger switch and cable with optical fibre/wire 01
Fibres 200μ 01
Fibres 320μ 03
Glasses(green PC Filter) 03(1 for Patient & 2 for Dentist & Assistant)
Fibre Cutter 01
Single-use tips (including one bending tool) 01 Set of 50 tips
Preinstalled complete FONALaser software including 12 x preset program possibility
Technical Data
Technical Data FONALaser
empty
General
empty
empty
Beam guide: Flexible quartz glass fiber
Display: Full color, graphical LCD touch screen
Cooling: Internal air cooling controlled by output
Temperature switch: Software temperature switch at 48° C
Door contact connection: Potential-free contact 5 VDC/20 mA (TTL)
Dimensions (W x L x H): 182 x 197 x 189 mm
Weight: approx. 1000 g incl. handpiece
Laser type: Diode laser
Wavelength: 970 nm ± 15 nm
Laser system: Class IV (according to IEC 60825-1)
Device classification: Class IIb (according to Council Directive 93/42/EEC)
Optical power: approx. 0.5 - 4.0 W (CW)
Optical peak power: approx. 7 W (diode)
Emission modes: CW (continuous wave),
chopped 1 Hz to 100 Hz,
peak-pulse approx. 1.5 kHz - 20 kHz
Pulse: repeated pulse
Pulse duration: Chopped mode: 5 ms - 0.5 sec.
Peak-pulse: 23 μs fixed
IP degree of protection: Laser unit: IP20
Aiming beam: 635 or 650 nm, max. 1 mW
NOHD: From the distal end of the optical fiber: 1.5 m
Optical fiber thickness: 200 and 320 μm, NA >= 0.22
Operation: Finger switch, with electronic access key
Nominal power input: 12 V DC 5.25 A max. 63 VA MPU63-105 or
15 V DC 6.66 A max. 100 VA MPU100-106
Insulation class: Class I, type B (according to IEC 60601-1)
Adapter: External, 100 - 240 VAC, 50 - 60 Hz
Power supply: The FONALaser may only be operated with the Sinpro MPU63-105 or Sinpro MPU100-106 power supply.
1. EL DIA QUE NACI 31 DE JULIO DE 1997 ME LLAMO: GUSTAVO EZEQUIEL MENDEZ NACI EN:LAFERRERE CUIUDAD DE BUENOS AIRES MI DEPORTE FAVORITO ES EL FUTBOL HAGO FUTBOL EN EL CLUB A.A.A.J..........
2. Eduardo Nicolás Tuzzio (Buenos Aires, Argentina, 31 de julio de 1974) es un futbolista argentino. Juega de defensor y su actual equipo es Independiente de Avellaneda en la Primera División de Argentina
3. Trayectoria Luego de su primer éxito, y al no tener continuidad en el conjunto de Boedo, se fue a préstamo a Quilmes. Jugó a lo largo de una temporada, alrededor de 40 partidos y marcó su primer tanto como profesional. Vuelta a San Lorenzo Para mediados de 1996, Eduardo regresó de la cesión a San Lorenzo de Almagro, club en el que se quedó durante cinco años. Allí disputó 150 partidos en la primera división en los que marcó 6 goles y se consagró campeón del Torneo Clausura 2001. L
4. Ignacio Flores Ocaranza (31 de julio de 1953 - 11 de agosto de 2011) fue un futbolista mexicano que se desempeñó como defensa lateral derecho. Fue hermano del que también fuera un destacado futbolista Luis Flores,1 al igual que sus otros 3 hermanos que jugaron fútbol aunque no profesionalmente. Nacho Flores es de las figuras históricas del Cruz Azul, siendo un elemento inamovible por el sector derecho celeste, muy técnico, con gran recorrido, desborde y profundidad por la banda. Jugó para Cruz Azul durante toda su carrera futbolística.
5. Originario de la colonia Malinche del Distrito Federal, Ignacio nace en el seno de una familia futbolera. Su padre, el Sr. Lorenzo Flores lo fue llevando desde categorías infantiles ya mostraba sus cualidades técnicas. A los 16 años, juega en el Torneo de los Barrios y el América los invita a probarse en sus filas, pero Nacho rechaza la oferta.2 Decide ir a probarse con el Pachuca, pero el descenso a Segunda División le corta la posibilidad de jugar en el máximo circuito
6. Pero en enero de 1970, el Cruz Azul hace una convocatoria donde invita a jóvenes con cualidades a probarse para integrarse en sus filas. Después de un proceso selectivo con aproximadamente 3000 aspirantes, Ignacio logra quedarse en la lista final de 30 jugadores que conformarían un equipo piloto; tres meses después, sería llamado a la reserva profesional. Dos años después (en 1972) y con 18 años de edad, Raúl Cárdenas le da la oportunidad de integrarse al primer equipo cementero
7. Nacho Flores rápidamente se adueñó de la banda derecha, donde fue un titular indiscutible durante casi 16 años. Siempre mostró un gran profesionalismo, nunca se guardaba nada dentro del campo de juego; varios jugadores complementaron la zaga cementera, pero Ignacio era inamovible. Por estas virtudes, no fue de extrañar que fuera convocado a la Selección de México, aunque solo fuera convocado en 12 ocasiones. Participó en el Mundial de Fútbol de Argentina 78, alineando en la derrota mexicana ante su similar de Polonia