El documento describe los pasos para realizar el mantenimiento básico de un mouse de computadora. Estos incluyen: 1) desarmar el mouse quitando los tornillos; 2) quitar la placa de circuito y otros componentes y limpiarlos con espuma limpiadora; 3) limpiar las partes externas de plástico con brocha y enjuagar; y 4) volver a armar el mouse.
CS Unitec Spiked Rollers and Frames Catalog PageCS Unitec
Spiked rollers and roller frames, as well as dust extraction vacuum systems, joint cutters, wall slotters, angle grinders, masonry tools, concrete grinders at CS Unitec
CS Unitec Spiked Rollers and Frames Catalog PageCS Unitec
Spiked rollers and roller frames, as well as dust extraction vacuum systems, joint cutters, wall slotters, angle grinders, masonry tools, concrete grinders at CS Unitec
Entre las novedades introducidas por el Código Aduanero (Ley 22415 y Normas complementarias), quizás la más importante es el articulado referido a la determinación del Valor Imponible de Exportación; es decir la base sobre la que el exportador calcula el pago de los derechos de exportación.
Anna Lucia Alfaro Dardón, Harvard MPA/ID.
Opportunities, constraints and challenges for the development of the small and medium enterprise (SME) sector in Central America, with an analytical study of the SME sector in Nicaragua. - focused on the current supply and demand gap for credit and financial services.
Anna Lucía Alfaro Dardón
Dr. Ivan Alfaro
1. MANTENIMIENTO A MAUSE
HUGO ACOSTA
Mantenimiento de equipo
de cómputo básico
HANIA RUBI RODRIGUEZ
ALVAREZ
CONALEP TLALNEPANTLA 1
201
2. MATERIALES
*DESARMADORES: *UNA BROCHA MEDIANA
PLANO *LIMPIADOR DE CIRCUITO
CRUZ *FRANELAS
* ESPUMA LIMPIADORA
*CEPILLO
REPORTE
1-CON EL DESARMADOR EN CRUZ BOTAMOS TODOS LOS TORNILLOS QUE TENIA EL
MAUSE
2- YA QUE ESTAVAN TODOS BOTADOS QUITAMOS LA PARTE DE ARRIVA DEL MAUSE Y
QUITAMOS LA PLACA DE CIRCUITOY TODOS SUS COMPONENTES LOS COLOCAMOS EN
LA TAPA DEL LIMPIADOR DE ESPUMA
3. 3-CON LA ESPUMA LIMPIADORA EMPESAMOS A LAVAR LAS PARTES PLASTICAS QUE ES
LA BASE Y LA PARTE DE ARRIVA Y ENJUAGAMOS Y SECAMOS
4-YA QUE ACAVAMOS DE HACERLO CON LA BROCHA SACUDIMOS LA PLACA DE
CIRCUITO Y UGMECTAMOS LIMPIADOR DE CIRCUITO SOLO CON UNA ROCIADA BASTA
5-YA QUE HICIMOS ESO VOLVIMOS A
ARMAR LA PARTE CENTRAL DEL MAUSE
6-POR ULTIMO CON ESPUMA LIMPIADORA Y
UNA FRANELA LIMPIAMOS LA PARTE DEL
CABLE Y LISTO.