On National Teacher Day, meet the 2024-25 Kenan Fellows
Fretwork presentation
1. Yenibosna Primary School “ Plywood, Scrollwork/Fretwork and Wood Painting” Hand Craft Productions by Using Wood January, 2011 Istanbul - TURKEY
2.
3.
4. As you seen on photo, you should put the figure /design on carbon paper by using a friction tape to keep stable the paper, before drawing the figure on plywood…You can draw geometrical shapes, flowers, asymmetrical shapes or what you want to draw…
5. STEP 2 – Drawing The Figure/Design on The Plywood And then, you should follow the figure’s line to transfer same apperience on plywood by using carbon paper and pencil…Just take a view that photo …!
6. You can draw what you want to draw on plywood… it depends on your creativity The figure which below is for a napkin holder…As you seen, the same figure has transferred on plywood, so it s ready to be cut by fret saw…!
7. STEP 3 – Cutting the Plywood by Using Fretsaw To cut the plywood firstly, you should put the blade of it tightly…
8. And then, you can begin to cut the plywood by following the line’s of design… However, you should be carefull while you are cutting it, because it is so thin and you can break it easily..!