Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.
Printed in KoreaP/NO : MFL67732805 (1304-REV00)
LED TV
SERVICE MANUAL
North/Latin America	 http://aic.lgservice.com
Europe...
- 2 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
CO...
- 3 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Ma...
- 4 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SE...
- 5 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
IC...
- 6 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SP...
- 7 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
5....
- 8 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
No...
- 9 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
AD...
- 10 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
4...
- 11 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
4...
- 12 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
9...
- 13 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
T...
- 14 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
2...
- 15 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
3...
- 16 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
P...
- 17 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
5...
- 18 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
6...
- 19 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
7...
- 20 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
8...
- 21 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
9...
- 22 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
1...
- 23 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
A...
- 24 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
A...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF
Copyright © 2013 LG Electronics. Inc. Al...
Manual de serviço TV LED LG 22LN4050TB chassis LB35A.
Próximo SlideShare
Cargando en…5
×

de

Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 1 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 2 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 3 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 4 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 5 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 6 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 7 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 8 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 9 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 10 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 11 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 12 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 13 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 14 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 15 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 16 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 17 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 18 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 19 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 20 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 21 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 22 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 23 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 24 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 25 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 26 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 27 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 28 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 29 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 30 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 31 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 32 Manual de serviço TV LED LG 22LN4050TB chassis LB35A. Slide 33
Próximo SlideShare
Manual de serviço TV SHARP LED/LCD diversos modelos linha LC.
Siguiente
Descargar para leer sin conexión y ver en pantalla completa.

3 recomendaciones

Compartir

Descargar para leer sin conexión

Manual de serviço TV LED LG 22LN4050TB chassis LB35A.

Descargar para leer sin conexión

Manual de serviço do televisor de LED da marca LG 22LN4050TB chassis LB35A.

Audiolibros relacionados

Gratis con una prueba de 30 días de Scribd

Ver todo

Manual de serviço TV LED LG 22LN4050TB chassis LB35A.

  1. 1. Printed in KoreaP/NO : MFL67732805 (1304-REV00) LED TV SERVICE MANUAL North/Latin America http://aic.lgservice.com Europe/Africa http://eic.lgservice.com Asia/Oceania http://biz.lgservice.com Internal Use Only CHASSIS : LB35A MODEL : 22LN4050 22LN4050-TB CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
  2. 2. - 2 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes CONTENTS CONTENTS ............................................................................................... 2 SAFETY PRECAUTIONS ......................................................................... 3 SERVICING PRECAUTIONS..................................................................... 4 SPECIFICATION........................................................................................ 6 ADJUSTMENT INSTRUCTION................................................................. 9 TROUBLE SHOOTING GUIDE................................................................ 13 BLOCK DIAGRAM................................................................................... 23 EXPLODED VIEW ................................................................................... 24 SCHEMATIC CIRCUIT DIAGRAM ...............................................................
  3. 3. - 3 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB. Keep wires away from high voltage or high temperature parts. Before returning the receiver to the customer, always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock. Leakage Current Cold Check(Antenna Cold Check) With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 MΩ and 5.2 MΩ. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer. Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer. Leakage Current Hot Check circuit IMPORTANT SAFETY NOTICE SAFETY PRECAUTIONS
  4. 4. - 4 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS on page 3 of this publication. NOTE: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions on page 3 of this publication, always follow the safety precau- tions. Remember: Safety First. General Servicing Precautions 1. Always unplug the receiver AC power cord from the AC power source before; a. Removing or reinstalling any component, circuit board module or any other receiver assembly. b. Disconnecting or reconnecting any receiver electrical plug or other electrical connection. c. Connecting a test substitute in parallel with an electrolytic capacitor in the receiver. CAUTION: A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explo- sion hazard. 2. Test high voltage only by measuring it with an appropriate high voltage meter or other voltage measuring device (DVM, FETVOM, etc) equipped with a suitable high voltage probe. Do not test high voltage by drawing an arc. 3. Do not spray chemicals on or near this receiver or any of its assemblies. 4. Unless specified otherwise in this service manual, clean electrical contacts only by applying the following mixture to the contacts with a pipe cleaner, cotton-tipped stick or comparable non-abrasive applicator; 10 % (by volume) Acetone and 90 % (by volume) isopropyl alcohol (90 % - 99 % strength) CAUTION: This is a flammable mixture. Unless specified otherwise in this service manual, lubrication of contacts in not required. 5. Do not defeat any plug/socket B+ voltage interlocks with which receivers covered by this service manual might be equipped. 6. Do not apply AC power to this instrument and/or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed. 7. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead. Always remove the test receiver ground lead last. 8. Use with this receiver only the test fixtures specified in this service manual. CAUTION: Do not connect the test fixture ground strap to any heat sink in this receiver. Electrostatically Sensitive (ES) Devices Some semiconductor (solid-state) devices can be damaged eas- ily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component dam- age caused by static by static electricity. 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alter- natively, obtain and wear a commercially available discharg- ing wrist strap device, which should be removed to prevent potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or expo- sure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static type solder removal device. Some sol- der removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads elec- trically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective mate- rial to the chassis or circuit assembly into which the device will be installed. CAUTION: Be sure no power is applied to the chassis or cir- cuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replace- ment ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity suf- ficient to damage an ES device.) General Soldering Guidelines 1. Use a grounded-tip, low-wattage soldering iron and appropri- ate tip size and shape that will maintain tip temperature within the range or 500 °F to 600 °F. 2. Use an appropriate gauge of RMA resin-core solder composed of 60 parts tin/40 parts lead. 3. Keep the soldering iron tip clean and well tinned. 4. Thoroughly clean the surfaces to be soldered. Use a mall wire- bristle (0.5 inch, or 1.25 cm) brush with a metal handle. Do not use freon-propelled spray-on cleaners. 5. Use the following unsoldering technique a. Allow the soldering iron tip to reach normal temperature. (500 °F to 600 °F) b. Heat the component lead until the solder melts. c. Quickly draw the melted solder with an anti-static, suction- type solder removal device or with solder braid. CAUTION: Work quickly to avoid overheating the circuit board printed foil. 6. Use the following soldering technique. a. Allow the soldering iron tip to reach a normal temperature (500 °F to 600 °F) b. First, hold the soldering iron tip and solder the strand against the component lead until the solder melts. c. Quickly move the soldering iron tip to the junction of the component lead and the printed circuit foil, and hold it there only until the solder flows onto and around both the compo- nent lead and the foil. CAUTION: Work quickly to avoid overheating the circuit board printed foil. d. Closely inspect the solder area and remove any excess or splashed solder with a small wire-bristle brush.
  5. 5. - 5 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes IC Remove/Replacement Some chassis circuit boards have slotted holes (oblong) through which the IC leads are inserted and then bent flat against the cir- cuit foil. When holes are the slotted type, the following technique should be used to remove and replace the IC. When working with boards using the familiar round hole, use the standard technique as outlined in paragraphs 5 and 6 above. Removal 1. Desolder and straighten each IC lead in one operation by gently prying up on the lead with the soldering iron tip as the solder melts. 2. Draw away the melted solder with an anti-static suction-type solder removal device (or with solder braid) before removing the IC. Replacement 1. Carefully insert the replacement IC in the circuit board. 2. Carefully bend each IC lead against the circuit foil pad and solder it. 3. Clean the soldered areas with a small wire-bristle brush. (It is not necessary to reapply acrylic coating to the areas). Small-Signal Discrete Transistor Removal/Replacement 1. Remove the defective transistor by clipping its leads as close as possible to the component body. 2. Bend into a U shape the end of each of three leads remain- ing on the circuit board. 3. Bend into a U shape the replacement transistor leads. 4. Connect the replacement transistor leads to the corresponding leads extending from the circuit board and crimp the U with long nose pliers to insure metal to metal contact then solder each connection. Power Output, Transistor Device Removal/Replacement 1. Heat and remove all solder from around the transistor leads. 2. Remove the heat sink mounting screw (if so equipped). 3. Carefully remove the transistor from the heat sink of the circuit board. 4. Insert new transistor in the circuit board. 5. Solder each transistor lead, and clip off excess lead. 6. Replace heat sink. Diode Removal/Replacement 1. Remove defective diode by clipping its leads as close as pos- sible to diode body. 2. Bend the two remaining leads perpendicular y to the circuit board. 3. Observing diode polarity, wrap each lead of the new diode around the corresponding lead on the circuit board. 4. Securely crimp each connection and solder it. 5. Inspect (on the circuit board copper side) the solder joints of the two original leads. If they are not shiny, reheat them and if necessary, apply additional solder. Fuse and Conventional Resistor Removal/Replacement 1. Clip each fuse or resistor lead at top of the circuit board hollow stake. 2. Securely crimp the leads of replacement component around notch at stake top. 3. Solder the connections. CAUTION: Maintain original spacing between the replaced component and adjacent components and the circuit board to prevent excessive component temperatures. Circuit Board Foil Repair Excessive heat applied to the copper foil of any printed circuit board will weaken the adhesive that bonds the foil to the circuit board causing the foil to separate from or lift-off the board. The following guidelines and procedures should be followed when- ever this condition is encountered. At IC Connections To repair a defective copper pattern at IC connections use the following procedure to install a jumper wire on the copper pattern side of the circuit board. (Use this technique only on IC connec- tions). 1. Carefully remove the damaged copper pattern with a sharp knife. (Remove only as much copper as absolutely necessary). 2. carefully scratch away the solder resist and acrylic coating (if used) from the end of the remaining copper pattern. 3. Bend a small U in one end of a small gauge jumper wire and carefully crimp it around the IC pin. Solder the IC connection. 4. Route the jumper wire along the path of the out-away copper pattern and let it overlap the previously scraped end of the good copper pattern. Solder the overlapped area and clip off any excess jumper wire. At Other Connections Use the following technique to repair the defective copper pattern at connections other than IC Pins. This technique involves the installation of a jumper wire on the component side of the circuit board. 1. Remove the defective copper pattern with a sharp knife. Remove at least 1/4 inch of copper, to ensure that a hazardous condition will not exist if the jumper wire opens. 2. Trace along the copper pattern from both sides of the pattern break and locate the nearest component that is directly con- nected to the affected copper pattern. 3. Connect insulated 20-gauge jumper wire from the lead of the nearest component on one side of the pattern break to the lead of the nearest component on the other side. Carefully crimp and solder the connections. CAUTION: Be sure the insulated jumper wire is dressed so the it does not touch components or sharp edges.
  6. 6. - 6 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range This specification is applied to the LB35A chassis. 2. Requirement for Test Each part is tested as below without special appointment. (1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C (2) Relative Humidity: 65 % ± 10 % (3) Power Voltage : Standard input voltage (AC 100-240 V~, 50/60 Hz) * Standard Voltage of each products is marked by models. (4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM. (5) The receiver must be operated for about 5 minutes prior to the adjustment. 3. Test method 1) Performance: LGE TV test method followed 2) Demanded other specification - Safety : CE, IEC specification - EMC : CE, IEC 4. Model General Specification * HDMI 1.4 with Deep Color is only apply for FHD Model No. Item Specification Remarks 1. Market NON EU 2. Broadcasting system PAL/SECAM B/G/D/K PAL-I NTSC-M 3. Channel Storage BAND PAL(BG,I) NTSC(M) China(DK) VHF/UHF 01-C69 2~78 C1~C69 Cable S1~S47 1~71 S1~S47 4. Receiving system Upper Heterodyne 5. Video Input PAL, SECAM, NTSC Rear (2EA) 6. Component Input Y/Cb/Cr, Y/Pb/Pr Rear (1EA) 7. USB Input MP3, JPEG,Movie Side(1EA) 8. AV Audio Output RF/AV/HDMI Audio Output Rear (1EA) 9. D-SUB INPUT S/W Upgrade Only Rear (1EA) 10. HDMI Input HDMI-DTV, Only PCM MODE Rear (2EA) 11. Audio Input (1EA) AVComponent L/R Input(2EA)
  7. 7. - 7 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 5. Component Video Input (Y, PB, PR) No. Resolution H-freq(kHz) V-freq(Hz) Pixel clock(MHz) Proposed 1. 720*480 15.73 59.94 13.500 SDTV, DVD 480I(525I) 2. 720*480 15.75 60.00 13.514 SDTV, DVD 480I(525I) 3. 720*576 15.625 50.00 13.500 SDTV, DVD 576I(625I) 50Hz 4. 720*480 31.47 59.94 27.000 SDTV 480P 5. 720*480 31.50 60.00 27.027 SDTV 480P 6. 720*576 31.25 50.00 27.000 SDTV 576P 50Hz 7. 1280*720 44.96 59.94 74.176 HDTV 720P 8. 1280*720 45.00 60.00 74.250 HDTV 720P 9. 1280*720 37.50 50.00 74.25 HDTV 720P 50Hz 10. 1920*1080 28.125 50.00 74.250 HDTV 1080I 50Hz, 11. 1920*1080 33.72 59.94 74.176 HDTV 1080I 12. 1920*1080 33.75 60.00 74.25 HDTV 1080I 13. 1920*1080 56.25 50 148.5 HDTV 1080P 14. 1920*1080 67.432 59.94 148.350 HDTV 1080P 15. 1920*1080 67.5 60.00 148.5 HDTV 1080P 6. HDMI Input 6.1. PC Mode * Spec. out but it can be shown the picture at only HDMI/DVI IN 1 via DVI to HDMI Cable * Monitor Range Limits Min Vertical Freq - 58 Hz / Max Vertical Freq - 63 Hz Min Horiz. Freq - 28 kHz / Max Horiz. Freq - 68 kHz Pixel Clock - 150 MHz No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remarks 1. 640×480 31.469 59.94 25.17 VESA(VGA) 2. 800×600 37.879 60.317 40.00 VESA(SVGA) 3. 1024×768 48.363 60.004 65.00 VESA(XGA) 4. 1280×768 47.776 59.87 79.5 VESA(WXGA) 5. 1360×768 47.72 59.799 84.62 VESA(WXGA) 6 1366×768 47.7 60.00 84.62 WXGA 7. 1280×1024 63.595 60.00 108.875 SXGA 8. 1920×1080 66.647 59.988 138.625 WUXGA
  8. 8. - 8 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed Remarks 1. 720*480 15.73 59.94 13.500 SDTV, DVD 480I(525I) Spec. out but display.2. 720*480 15.75 60.00 13.514 SDTV, DVD 480I(525I) 3. 720*576 15.625 50.00 13.500 SDTV, DVD 576I(625I) 50Hz 4. 720*480 31.47 59.94 27 SDTV 480P 5. 720*480 31.5 60.00 27.027 SDTV 480P 6. 720*576 31.25 50.00 27 SDTV 576P 7. 1280*720 44.96 59.94 74.176 HDTV 720P 8. 1280*720 45 60.00 74.25 HDTV 720P 9. 1280*720 37.5 50.00 74.25 HDTV 720P 10. 1920*1080 28.125 50.00 74.25 HDTV 1080I 11 1920*1080 33.72 59.94 74.176 HDTV 1080I 12 1920*1080 33.75 60.00 74.25 HDTV 1080I 13 1920*1080 56.25 50.00 148.5 HDTV 1080P 14 1920*1080 67.432 59.94 148.350 HDTV 1080P 15 1920*1080 67.5 60.00 148.5 HDTV 1080P 16 1920*1080 27 24.00 74.25 HDTV 1080P 17 1920*1080 33.75 30.00 74.25 HDTV 1080P 18 1920*1080 26.97 23.97 74.25 HDTV 1080P 19 1920*1080 33.716 29.976 74.25 HDTV 1080P 6.2. DTV Mode
  9. 9. - 9 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes ADJUSTMENT INSTRUCTION 1. Application Range This specification sheet is applied to all of the LED TV with LB35A chassis. 2. Designation (1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of 25 °C ± 5 °C of temperature and 65 % ± 10 % of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 100-220 V, 50/60Hz. (5) The receiver must be operated for over 5 minutes prior to the adjustment when module is in the circumstance of above 15 °C. ► In case of keeping module is in the circumstance of 0 °C, it should be placed in the circumstance of above 15 °C for 2 hours. ► In case of keeping module is in the circumstance of below -20 °C, it should be placed in the circumstance of above 15 °C for 3 hours. * Caution When a still image is displayed for 20 minutes or longer (especially where W/B scale is strong. Digital pattern 13ch and/or Cross hatch pattern 09ch), there can some afterimage in the black level area. 3. MAIN PCBA Adjustments 3.1. ADC Calibration 3.1.1. Using D/L Jig - An ADC calibration is automatically adjusted from DFT-Jig - If it needs to adjust manually, refer to appendix. * ADC Calibration Protocol (RS232) Adjust Sequence ▪ aa 00 00 [Enter Adjust Mode] ▪ xb 00 40 [Component1 Input (480i)] ▪ ad 00 10 [Adjust 480i Comp1] ▪ aa 00 90 End Adjust mode 3.2. EDID Download ▪ HD MODEL ▪ 8BIT FHD MODEL a. White Balance Adjustment NO Item CMD 1 CMD 2 Data 0 Enter Adjust MODE Adjust ‘Mode In’ A A 0 0 When transfer the ‘Mode In’, Carry the command. ADC adjust ADC Adjust A D 1 0 Automatically adjustment (The use of a internal pattern) ** HDMI 1 : 256Bytes 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 00 FF FF FF FF FF FF 00 1E 6D 01 00 01 01 01 01 10 01 17 01 03 80 A0 5A 78 0A F3 30 A4 54 46 96 26 20 0F 49 4B 21 08 00 45 40 01 01 61 40 01 01 01 01 30 01 01 01 01 01 01 01 1D 00 72 51 D0 1E 20 6E 28 40 55 00 C4 8E 21 00 00 1E 1B 21 50 A0 51 00 1E 30 50 48 88 35 00 BC 77 21 00 00 1C 00 00 00 FC 00 4C 60 47 20 54 56 0A 20 20 20 20 20 20 20 00 00 00 FD 70 00 3A 3F 1C 44 0F 00 0A 20 20 20 20 20 20 01 ⓐ 80 02 03 28 F1 4F 84 07 01 16 02 03 11 12 13 14 05 90 20 22 1F 10 26 11 07 50 09 7F 07 83 01 00 00 68 A0 03 0C 00 10 00 80 1E 00 01 1D 00 80 51 D0 1C 20 B0 40 80 35 00 BC 88 21 00 00 1E 8C 0A D0 8A 20 E0 C0 2D 10 10 3E 96 00 13 8E 21 00 00 18 8C 0A A0 14 D0 51 F0 16 00 26 7C 43 00 C4 8E 21 00 00 98 01 1D E0 80 18 71 1C 16 20 58 2C 25 00 C4 8E 21 00 00 9E F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ⓐ ** HDMI 1 : 256Bytes 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 00 FF FF FF FF FF FF 00 1E 6D 01 00 01 01 01 01 10 01 17 01 03 80 A0 5A 78 0A D9 B0 A3 57 49 9C 25 20 11 49 4B 21 08 00 01 01 45 40 61 40 01 01 81 80 30 01 01 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C 40 45 00 08 44 21 00 00 1E 1B 21 50 A0 51 00 1E 30 50 48 88 35 00 BC 88 21 00 00 1C 00 00 00 FC 00 4C 60 47 20 54 56 0A 20 20 20 20 20 20 20 00 00 00 FD 70 00 3A 3F 1C 44 0F 00 0A 20 20 20 20 20 20 01 ⓐ 80 02 03 28 F1 4F 90 07 01 16 02 03 11 12 13 04 14 90 05 20 22 1F 26 11 07 50 09 7F 07 83 01 00 00 68 A0 03 0C 00 10 00 80 1E 00 01 1D 00 80 51 D0 1C 20 B0 40 80 35 00 BC 88 21 00 00 1E 8C 0A D0 8A 20 E0 C0 2D 10 10 3E 96 00 13 8E 21 00 00 18 8C 0A A0 14 D0 51 F0 16 00 26 7C 43 00 C4 8E 21 00 00 98 01 1D E0 80 18 71 1C 16 20 58 2C 25 00 C4 8E 21 00 00 9E F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ⓐ EDID C/S data HD FHD (8Bit) HDMI HDMI Check sum (Hex) Block 0 A5 C1 Block 1 44(HDMI1) 44 (HDMI1) 34(HDMI2) 34 (HDMI2)
  10. 10. - 10 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 4. White Balance Adjustment 4.1. Overview 4.1.1. W/B adj. Objective How-it-works (1) Objective: To reduce each Panel’s W/B deviation (2) How-it-works: When R/G/B gain in the OSD is at 192, it means the panel is at its Full Dynamic Range. In order to prevent saturation of Full Dynamic range and data, one of R/G/B is fixed at 192, and the other two is lowered to find the desired value. (3) Adj. condition: normal temperature 1) Surrounding Temperature: 25 °C ± 5 °C 2) Warm-up time: About 5 Min◦ 3) Surrounding Humidity: 20% ~ 80% 4) Before White balance adjustment, Keep power on status, don’t power off 4.1.2. Adj. condition and cautionary items (1) Lighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding. (2) Probe location: Color Analyzer(CA-210) probe should be within 10 cm and perpendicular of the module surface (80°~ 100°) (3) Aging time 1) After Aging Start, Keep the Power ON status during 5 Minutes. 2) In case of LCD, Back-light on should be checked using no signal or Full-white pattern. 4.2. Equipment (1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED: CH14) (2) Adj. Computer (During auto adj., RS-232C protocol is needed) (3) Adjust Remocon (4) Video Signal Generator MSPG-925F 720p/204-Gray (Model: 217, Pattern: 49) * Color Analyzer Matrix should be calibrated using CS-1000. 4.3. Equipment connection 4.4. Adjustment Command (Protocol) (1) RS-232C Command used during auto-adj. (2) Adjustment Map 4.5. Adjustment method 4.5.1. Auto WB calibration (1) Set TV in ADJ mode using P-Only key(or POWER ON key). (2) Place optical probe on the center of the display. - It need to check probe condition of zero calibration before adjustment. (3) Connect RS-232C Cable (4) Select mode in ADJ Program and begin a adjustment. (5) When WB adjustment is completed with OK message, check adjustment status of pre-set mode. (Cool, Medium, Warm) (6) Remove probe and RS-232C cable. ▪ W/B Adj. must begin as start command “wb 00 00” , and finish as end command “wb 00 ff”, and Adj. offset if need. 4.5.2. LED White balance table - If Model is Polaris Model, G-gain fix is applied. (1) Cool Mode 1) Purpose : Adjust the color temperature to reduce the deviation of the module color temperature. 2) Principle : To adjust the white balance without the saturation, Fix the G gain to 172 (default data) and change the others (R/B Gain ). 3) Adjustment mode : mode - Cool (2) Medium / Warm Mode 1) Purpose : Adjust the color temperature to reduce the deviation of the module color temperature. 2) Principle : To adjust the white balance without the saturation, Fix the one of R/G/B gain to 192 (default data) and decrease the others. 3) Adjustment mode : Two modes - Medium / Warm Color Analyzer Computer Pattern Generator RS-232C RS-232C RS-232C Probe Signal Source * If TV internal pattern is used, not needed RS-232C COMMAND Explantion CMD DATA ID wb 00 00 Begin White Balance adjustment wb 00 ff End White Balance adjustment (internal pattern disappears ) Adj. item Command (lower caseASCII) Data Range (Hex.) Default (Decimal) CMD1 CMD2 MIN MAX Cool R Gain j g 00 C0 G Gain j h 00 C0 B Gain j i 00 C0 R Cut G Cut B Cut Medium R Gain j a 00 C0 G Gain j b 00 C0 B Gain j c 00 C0 R Cut G Cut B Cut Warm R Gain j d 00 C0 G Gain j e 00 C0 B Gain j f 00 C0 R Cut G Cut
  11. 11. - 11 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 4.6. Reference(White Balance Adjustment coordinate and color temperature) (1) Luminance: 204 Gray, 80IRE (2) Standard color coordinate and temperature using CS-1000 (over 26 inch) ■ The spec of color temperature and coordinate. * Note : x,y coordinates are drifted about 0.007 after 30 mins heat-run. So checking color coordinate within 5-min at total assembly line, consider x,y coordinates might be up to 0.007 than x,y target of each color temperature. 5. Tool Option setting Inspection per countries (1) Press 'IN START' key at Factory Service remote control. (2) Select 'Tool Option 1'. (3) Punch in the number and press 'OK'. (Each of models has their number) (4) Correct 'Tool Option2' ~ 'Tool Option5'. (5) Completed adjusting Tool option. 6. Ship-out mode check (In-stop) ▪ After final inspection, press In-Stop key of the Adjustemnt Remote Control and check that the unit goes to Stand-by mode. 7. AUDIO output check 7.1. Audio input condition (1) RF input: Mono, 1KHz sine wave signal, 100% Modulation (2) CVBS, Component: 1KHz sine wave signal (0.4Vrms) (3) RGB PC: 1KHz sine wave signal (0.7Vrms) 7.2. Specification 8. GND and HI-POT Test 8.1. GND HI-POT auto-check preparation (1) Check the POWER CABLE and SIGNAL CABE insertion condition 8.2. GND HI-POT auto-check (1) Pallet moves in the station. (POWER CORD / AV CORD is tightly inserted) (2) Connect the AV JACK Tester. (3) Controller (GWS103-4) on. (4) GND Test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, execute next process (Hi-pot test). (Remove A/V CORD from A/V JACK BOX) (5) HI-POT test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, GOOD Lamp on and move to next process automatically. 8.3. Checkpoint (1) Test voltage - GND: 1.5 KV / min at 100 mA - SIGNAL: 3 KV / min at 100 mA (2) TEST time: 1 second (3) TEST POINT - GND Test = POWER CORD GND and SIGNAL CABLE GND. - Hi-pot Test = POWER CORD GND and LIVE NEUTRAL. (4) LEAKAGE CURRENT: At 0.5 mArms Mode Color Temp Color coordinate Remark Cool (C50) 13,000 K x = 0.269 (±0.002) y = 0.273 (±0.002) * Test signal - Inner pattern for W/B adjust - External white pattern (85IRE, 204gray) Medium (0) 9,300 K x = 0.285 (±0.002) y = 0.293 (±0.002) Warm (W50) 6,500 K x = 0.313 (±0.002) y = 0.329 (±0.002) Item Min Typ Max Unit Remark Audio practical max Output, L/R (Distortion=10% max Output) 4.5 5.0 6.0 W Vrms (1) Measurement condition - EQ/AVL/Clear Voice: Off (2) Speaker (8Ω Impedance)
  12. 12. - 12 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 9. USB S/W Download * optional, Service only (1) Put the USB Stick to the USB socket. (2) Automatically detecting update file in USB Stick. - If your downloaded program version in USB Stick is lower than that of TV set, it didn’t work. Otherwise USB data is automatically detected. (3) Show the message “Copying files from memory”. (4) Updating is starting. (5) Updating Completed, The TV will restart automatically. (6) If your TV is turned on, check your updated version and Tool option. (explain the Tool option, next stage) * If downloading version is more high than your TV have, TV can lost all channel data. In this case, you have to channel recover. if all channel data is cleared, you didn't have a DTV/ATV test on production line. * After downloading, have to adjust TOOL OPTION again. 1) Push IN-START key in service remote control. 2) Select Tool Option 1 and push OK key. 3) Punch in the number. (Each model has their number.) 10. Optional adjustments 10.1. Manual ADC Calibration ■ Enter ‘EZ ADJUST’ mode by pressing ‘ADJ’ key. ■ Enter Internal ADC calibration mode by pressing ‘’ or ‘OK’ key at ‘7. ADC Calibration’ ► Caution : Using ‘P-ONLY’ key of the Factory Service remote control when turns TV on. 10.2. Manual White balance Adjustment 10.2.1. Adjustment condition and cautionary items (1) Lighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding. (2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface. (80°~ 100°) (3) Aging time 1) After Aging Start, Keep the Power ON status during 5 Minutes. 2) In case of LCD, Back-light on should be checked using no signal or Full-white pattern. 10.2.2. Equipment (1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED: CH14) (2) Adj. Computer(During auto adj., RS-232C protocol is needed) (3) Adjust Remot control (4) Video Signal Generator MSPG-925F 720p/216-Gray (Model: 217, Pattern: 78) 10.2.3. Adjustment (1) Set TV in Adj. mode using POWER ON. (2) Zero Calibrate the probe of Color Analyzer, then place it on the center of LCD module within 10cm of the surface. (3) Press ADJ key → EZ adjust using adj. R/C → 6. White- Balance then press the cursor to the right (Key►). When Key(►) is pressed 216 Gray internal pattern will be displayed. (4) One of R Gain / G Gain / B Gain should be fixed at 192, and the rest will be lowered to meet the desired value. (5) Adj. is performed in COOL, MEDIUM, WARM 3 modes of color temperature. ■ If internal pattern is not available, use RF input. In EZ Adj. menu 6.White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner(ON). By selecting OFF, you can adjust using RF signal in 216 Gray pattern. EZ ADJUST 0. Tool Option1 1. Tool Option2 2. Tool Option3 3. Tool Option4 4. Tool Option5 5. Tool Option Commercial 6. Country Group 7. Area Option 8. ADC Calibration ► 9. White Balance 10. 10 Point WB 11. Test Pattern 12. EDID D/L 13. Sub B/C 14. Ext. Input Adjust ADC Calibration ADC Comp 480i ADC Comp 1080p ADC RGB Start NG NG NG Reset
  13. 13. - 13 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes TROUBLE SHOOTING 1. NO POWER-Main PCBA Is Adapter Output VOLTAGE 19.4V through of JK700? NO POWER Is 3.3V at C708? Checkwaveform of X501 YES NO YES NO YES check open or short at Line. or change Adapter. check the Lines of IC701, If there is any problem at Line, Change IC701 NO Check Line short or open between IC501 and X501, Change IC501 or change X501 1 2 4 Is 1.8V at C745? is 1.25V at C742? 3 YES check the Lines of IC711,IC704 If there is any problem at Line, Change IC704,IC706. NO Insert F/W is 3.3V at 1pin of P120? when push power key, Is 0v at 2pin of P120? Change control Or check Line short or open of P120 5 is there any waver at 11pin of P120, when use remote controller? 6 NO YES change IR board Or check Line short or open of P120 NO 4 X501
  14. 14. - 14 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 2. No raster (Power LED blue, black screen) Is 19.4V at JK700? NO RASTER (Screen is not displayed) Insert the F/W back or REPLACE LCD MODULE Is 1.8V at L501? Is 1.25V at L500? Is 1.25V at 4pin of IC704? Is 1.8V at 2pin of IC711? YES NO YES NO YES Check Line short or open between IC711/IC704 and IC501, If there is any problem at Line, Change IC711/IC704 or change IC501 NO check open or short at Line and wafer between IC704,IC711 and IC600. If there is any problem at Line, Change IC704,IC711 or IC501 1 2 is 3V at 3pin of IC801? YES It is not over 3V at 1pin of IC801. Change Q802. Or check Line short or open between R803 and 95pin of IC501. Change IC 501. 4 3 NO check open or short at Line. or change Adapter is 12V at 1pin of P101? If is not under 1.5V at R722, change Q721 or check open and short of Line among Q720 and Q721. If is under 11V at L110, Check open and short Of line between L110 and P101. 6 NO Put into LVDS cable completely? LVDS cable have damage? NO If LVDS cable isn’t insulted enough, Insult LVDS cable until locking hook. If LVDS cable have damage, Change LVDS cable 5 YES YES
  15. 15. - 15 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 3. Abnormal/No screen (All input)-Main PCBA Put into LVDS cable completely? LVDS cable have damage? Abnormal/No screen (all input) Checkwaveform at signal line of P101 (Clock:9,10 Data: 6,7,12,13,15,16,18,19) YES NO YES NO YES If LVDS cable isn’t insulted enough, Insult LVDS cable until locking hook. If LVDS cable have damage, Change LVDS cable 1 Change module WAVEFORMS 3 Is 12V at 1pin of P101? If is not under 1.5V at R722, change Q721 or check open and short of Line among Q720 and Q721. If is under 11V at L110, Check open and short Of line between L110 and P101. 2 3 NO Check open and short Of line between Q720 and P101. Or Check LVDS cable have damage. Another is change IC501. 6,7,12,13,15,16,18,19 Pin of 1201 (Data Line) 9,10Pin of P101 (Clock line)
  16. 16. - 16 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes Put into RF cable completely? Abnormal screen (TV) YES NO NO insult RF cable tight and then Cable nut screw tight. 1 Change Main PCBA WAVEFORMS Is 1.8V at 7pin of TU401? 2 Is I2C waveform At 3,4pin of TU401? 3 4 Is IF waveform at 43 ,44 pin of IC501? NO NO 3 3Pin of TU401 (SCL) 4Pin of TU401 (SDA) 4 43,44pin of IC501 If 1.7V is not at plus pin of TU401, check It is over 3V at 2pin of IC401, if it is not, Check Line between TU401 and IC401 is open or short. Another is change IC401 or TU401 Check Line between TU401 and IC501 is open or short, Another is change IC501 or TU401 Check Line between TU401 and IC501 is open or short, Another is change IC501 or TU401 4. Abnormal screen (TV)-Main PCBA
  17. 17. - 17 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 5. Abnormal screen (AV)-Main PCBA Abnormal screen (AV) YES NO NO Insult AV cable tight 1 Change IC501 WAVEFORMS Change Timing to 480I, 576I Or change format CVBS 2 3 Check Line between JK101 and IC501 is open or short, Another is change AV cable NO YES YES 3
  18. 18. - 18 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 6. Abnormal screen (HDMI)-Main PCBA Put into HDMI cable completely? Abnormal screen (HDMI) YES NO NO insulted HDMI cable 1 Change IC501 Is Input signal timing and format in spec? Change Timing according to product spec, change format under 8 bit in Ycbcr, Ypbpr, RGB 2 Is waveform at 10,12pin of JK204? 3 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable NO YES YES Is waveform at 1,3,4,6,7,9pin Of JK204? YES 4 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable NO Can read EDID and HDCP key though 16,15pin of JK204 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable YES Is 5V at 19pin of JK204? Check Line between JK204 and IC501 is open or short, Another is Change IC501 or HDMI cable 5 YES 6
  19. 19. - 19 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 7. No sound (all source )-Main PCBA Does wire connect P301 with speaker? NO sound (All source) YES NO YES NO YES Connect wire between P301 and speaker. 1 Change speaker and wire Is 19.4V at 19,20,31,32pin of IC301 ? If 8V is not plus at L703, check of JK700 is open. If is not Check Line between L703 and IC301 is open or short. .Another is change IC301 2 NO Is 3.3V at 40pin of IC301? If 3V is not plus 30pin of IC301, check It is over 3V at L301 if it is not, Check Line between L301 and IC301 is open or short. Another is change IC701,IC301 NO 3 4 YES Is I2C waveform at 10,11pin of IC301? Check Line between IC301 and IC501 is open or short, Another is change IC301 or IC501. NO 5 Is I2S waveform at R301,R302,R303,R304? 6 Check Line between IC301 and IC501 is open or short, Another is change IC301 or IC501. YES Is there any waveform P301? Check Line between IC301 and P301 is open or short. And then check resistance of speaker is under 4ohm. Another is change IC301 NO 4 10pin of IC301 11pin of IC301 5 R301(SDO) R302(WS) R303(SCK) 5 R304(MCLK) 6 1pin of P301(Audio out)
  20. 20. - 20 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 8. Abnormal sound (TV)-Main PCBA Put into RF cable completely? Abnormal sound (TV) YES NO insult RF cable tight and then Cable nut screw tight. 1 2 3 4 NO Change Main PCBA WAVEFORMS Is 1.8V at 7pin of TU401? Is I2C waveform At 3,4pin of TU401? Is IF waveform at 43 ,44 pin of IC501? NO NO 3 3Pin of TU401 (SCL) 4Pin of TU401 (SDA) 4 43,44pin of IC501 If 1.7V is not at plus pin of TU401, check It is over 3V at 2pin of IC401, if it is not, Check Line between TU401 and IC401 is open or short. Another is change IC401 or TU401 Check Line between TU401 and IC501 is open or short, Another is change IC501 or TU401 Check Line between TU401 and IC501 is open or short, Another is change IC501 or TU401
  21. 21. - 21 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 9. Abnormal sound (AV)-Main PCBA Put into AV cable completely? Abnormal sound (AV) YES NO Insult AV cable tight 1 Change IC501 WAVEFORMS Is waveform at C520,C521 2 Check Line between JK101 and IC501 is open or short, Another is change AV cable NO YES C520,C521(audio in) 2
  22. 22. - 22 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 10. Abnormal sound (HDMI)-Main PCBA Abnormal sound (HDMI) Put into HDMI cable completely? YES NO NO insulted HDMI cable 1 Change IC501 Is Input signal timing and format in spec? Change Timing according to product spec, change format under 8 bit in Ycbcr, Ypbpr, RGB 2 Is waveform at 10,12pin of JK204? 3 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable NO YES YES Is waveform at 1,3,4,6,7,9pin Of JK204? YES 4 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable NO Can read EDID and HDCP key though 16,15pin of JK204 Check Line between JK204 and IC501 is open or short, Another is Change HDMI cable YES Is 5V at 19pin of JK204? Check Line between JK204 and IC501 is open or short, Another is Change IC501 or HDMI cable 5 YES 6
  23. 23. - 23 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes Adaptor SoundAMP NTP7513 (( (( Module Audio Out MST6841XP 5 9 4 3 1011 TunerSDA TunerSCL TUNER IF_AGC B+ IR/KEY 40 24Mhz 98 99 44 43 IC502 SerialFlash 8Mbytes IC503 EEPROM 24C64 30 LPF 33 18 21 OP-AMP x4Gain AudioL-Out XXX 39 3738 AudioR-Out HDMI SCL/SDA 48 115 50 51113112 Audio_SCL Audio_SDA LVDS Output PDim Inv.ON P_ST3.5V M_3.3V TU_3.3V 19V Main_1.2V +18V 1011 7 8 9 38 I2S_MCLK I2S_WS I2S_SCK I2S_SDO 108111117 IR KEY1 Led_PWR 102105 53 52 45 85 84 EEPSDA EEPSCL 94 95 97 96 SPI_CLK SPI_DI SPI_CZ SPI_DO S_AMP_19V 32 40 LPF USB_5V 110 KEY2 ST_3.5V P_12V Q710 Main_1.8V M_3.3V Q720 AO3407A Panel_Vcc Main_5V ToUSB USB_DN USB_DP IF_P IF_N 31 35 1.8VREG 7 TU_1.8V 19 20 Audioout 27,35,3622,20,24, 776254 413018 9116107 100 101 Led_PWR DT1641S TPS40210 Module BLU LED_28V BLU_24V Module BLU MP20051 1.8VREG MP1472 MP1584 MP1472 +18V Q712 To OP_AMP CVBSIn AVaudioin BLOCK DIAGRAM
  24. 24. - 24 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes A2A31 900 200 400 540 910 120122 300 510502511501 800 LV1 EXPLODED VIEW Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. IMPORTANT SAFETY NOTICE
  25. 25. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  26. 26. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  27. 27. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  28. 28. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  29. 29. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  30. 30. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  31. 31. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  32. 32. APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF APCPCWM_4828539:WP_GLOBAL_PFWP_GLOBAL_PF Copyright © 2013 LG Electronics. Inc. All rights reserved. Only for training and service purposes LGE Internal Use Only
  • SeeYou13

    Sep. 25, 2019
  • delap1

    Dec. 11, 2018
  • ClasicMajalengka

    Jun. 28, 2016

Manual de serviço do televisor de LED da marca LG 22LN4050TB chassis LB35A.

Vistas

Total de vistas

4.873

En Slideshare

0

De embebidos

0

Número de embebidos

16

Acciones

Descargas

86

Compartidos

0

Comentarios

0

Me gusta

3

×