El documento describe la historia de los instrumentos de cuerda utilizados por las culturas antiguas como los egipcios y griegos. Explica que los romanos y moros posteriormente adoptaron y modificaron estos instrumentos, dando origen a la guitarra latina y morisca. Además, incluye diagramas ilustrando las partes principales de la guitarra y su escala musical.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Material de clases del curso Comunicación Integral y Marketing. Carrera de Administración de Empresas Mención Marketing PEV.
Instituto Profesional AIEP.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Material de clases del curso Comunicación Integral y Marketing. Carrera de Administración de Empresas Mención Marketing PEV.
Instituto Profesional AIEP.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
IMÁGENES SUBLIMINALES EN LAS PUBLICACIONES DE LOS TESTIGOS DE JEHOVÁClaude LaCombe
Recuerdo perfectamente la primera vez que oí hablar de las imágenes subliminales de los Testigos de Jehová. Fue en los primeros años del foro de religión “Yahoo respuestas” (que, por cierto, desapareció definitivamente el 30 de junio de 2021). El tema del debate era el “arte religioso”. Todos compartíamos nuestros puntos de vista sobre cuadros como “La Mona Lisa” o el arte apocalíptico de los adventistas, cuando repentinamente uno de los participantes dijo que en las publicaciones de los Testigos de Jehová se ocultaban imágenes subliminales demoniacas.
Lo que pasó después se halla plasmado en la presente obra.
Ponencia en I SEMINARIO SOBRE LA APLICABILIDAD DE LA INTELIGENCIA ARTIFICIAL EN LA EDUCACIÓN SUPERIOR UNIVERSITARIA. 3 de junio de 2024. Facultad de Estudios Sociales y Trabajo, Universidad de Málaga.
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
IMÁGENES SUBLIMINALES EN LAS PUBLICACIONES DE LOS TESTIGOS DE JEHOVÁClaude LaCombe
Recuerdo perfectamente la primera vez que oí hablar de las imágenes subliminales de los Testigos de Jehová. Fue en los primeros años del foro de religión “Yahoo respuestas” (que, por cierto, desapareció definitivamente el 30 de junio de 2021). El tema del debate era el “arte religioso”. Todos compartíamos nuestros puntos de vista sobre cuadros como “La Mona Lisa” o el arte apocalíptico de los adventistas, cuando repentinamente uno de los participantes dijo que en las publicaciones de los Testigos de Jehová se ocultaban imágenes subliminales demoniacas.
Lo que pasó después se halla plasmado en la presente obra.
Ponencia en I SEMINARIO SOBRE LA APLICABILIDAD DE LA INTELIGENCIA ARTIFICIAL EN LA EDUCACIÓN SUPERIOR UNIVERSITARIA. 3 de junio de 2024. Facultad de Estudios Sociales y Trabajo, Universidad de Málaga.
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
This article is all about what AI trends will emerge in the field of creative operations in 2024. All the marketers and brand builders should be aware of these trends for their further use and save themselves some time!
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
Unlocking the Power of ChatGPT and AI in Testing - A Real-World Look, present...Applitools
During this webinar, Anand Bagmar demonstrates how AI tools such as ChatGPT can be applied to various stages of the software development life cycle (SDLC) using an eCommerce application case study. Find the on-demand recording and more info at https://applitools.info/b59
Key takeaways:
• Learn how to use ChatGPT to add AI power to your testing and test automation
• Understand the limitations of the technology and where human expertise is crucial
• Gain insight into different AI-based tools
• Adopt AI-based tools to stay relevant and optimize work for developers and testers
* ChatGPT and OpenAI belong to OpenAI, L.L.C.
2. MALCOLM GYLLEN P.
• Instrumentos de cuerda utilizados por egipcios,
griegos y otras culturas de la antigüedad.
Instrumentos de cuerda
egipcios Lira griega
3. MALCOLM GYLLEN P.
• Posteriormente, los romanos adoptaron y
modificaron estos instrumentos de
cuerda: “Nació la guitarra latina”.
4. MALCOLM GYLLEN P.
• Los moros hicieron lo mismo y, en el siglo VII
D.C. introdujeron la “guitarra morisca” en la
península ibérica.
5.
6.
7. MALCOLM GYLLEN P.
Cejuela Marquetería
Cejuela
Trastes Clavijero
Cuerdas Espacios
Puente Boca
Paleta
Diapasón
Tapa
armónica
8. MALCOLM GYLLEN P.
Caja de resonancia
Aro
Paleta
Brazo o mástil
Taco Fondo o espaldar
9.
10. MALCOLM GYLLEN P.
+ grave
6ª MI
5ª LA
4ª RE
3ª SOL
2ª SI
1ª MI
+ agudo
12. MALCOLM GYLLEN P.
= 5ª
6ª MI
= 4ª 5ª LA
= 3ª 4ª RE
= 2ª 3ª SOL
= 1ª 2ª SI
1ª MI
Notas del editor
Esta plantilla se puede usar como archivo de inicio para proporcionar actualizaciones de los hitos del proyecto.SeccionesPara agregar secciones, haga clic con el botón secundario del mouse en una diapositiva. Las secciones pueden ayudarle a organizar las diapositivas o a facilitar la colaboración entre varios autores.NotasUse la sección Notas para las notas de entrega o para proporcionar detalles adicionales al público. Vea las notas en la vista Presentación durante la presentación. Tenga en cuenta el tamaño de la fuente (es importante para la accesibilidad, visibilidad, grabación en vídeo y producción en línea)Colores coordinados Preste especial atención a los gráficos, diagramas y cuadros de texto.Tenga en cuenta que los asistentes imprimirán en blanco y negro o escala de grises. Ejecute una prueba de impresión para asegurarse de que los colores son los correctos cuando se imprime en blanco y negro puros y escala de grises.Gráficos y tablasEn breve: si es posible, use colores y estilos uniformes y que no distraigan.Etiquete todos los gráficos y tablas.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
Picture with watercolor overlay background(Advanced)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Under Picture Tools, on the Format tab, in the Size group, click the arrow below Crop, point to Crop to Shape, and then under Rectangle click Rounded Rectangle.Drag the yellow diamond adjustment handle to the left to decrease the width of the donut shape.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.11” and the widthis set to 5.44”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Shadow in the left pane, in the Shadow pane, do the following:Click the button next Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 30%.In the Size box, enter 102%.In the Blur box, enter 15pt.In the Angle box, enter 0.In the Distance box, enter 0.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:ClickItalic.In the Font Color list, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 240, Green: 240, and Blue: 240.In the Font list, select Corbel.In the Font Size list, select 36 pt.To reproduce the background effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill. Also in the Fill pane, click the button next to Texture and then choose Blue Tissue Paper.Also in the Format Picture dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -40%.In the Contrast box, enter 40%.Select the rectangle. Also on the Home tab, in the Clipboard group, click Copy.Press DELETE to delete the rectangle.Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG).Select the picture. Under PictureTools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and Contrast, do the following:In the Brightness box, enter -15%.In the Contrast box, enter 50%.Also in the Format Picture dialog box, click Picture Color in the left pane, in the Picture Color pane, under Recolor, click the button next to Presets, and then click Sepia.Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Marker. Also in the Artistic Effects pane, do the following:In the Transparency box, enter 41%.In the Size box, enter 100%.On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 7.5” and in the Width box enter 10”.Also under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Radial. In the Direction list, select From Center.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following:In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1.In the Transparency box, enter 34%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Press and hold CTRL, and then on the slide, select the picture and the gradient-fill rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the shape effects on this slide (watercolor overlays), do the following:On the Insert tab, in the Illustrations group, click Shapes, and then under Lines click Freeform.On the slide, click points to create a shape along the top edge of the slide, that fits across the width of the slide and includes multiple points along the bottom edge of the shape (in the example above, 24 points along the bottom edge). Select the freeform shape. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 0, Green: 112, and Blue: 192. Also in the Fill pane, in the Transparency box, enter 85%.Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Glow and Soft Edges in the left pane, and in the Glow and Soft Edges pane, under Soft Edges, click the button next to Presets, and then click 10 pt.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Right-click the duplicate shape and select EditPoints. Move most of the bottom edge points upward and adjust some of the points left or right also (the edge should not be a duplicate of the first shape).Press and hold CTRL, and select the two freeform shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Press and hold CTRL, and select two new freeform shapes. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear. In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 118, Green: 41, and Blue: 20. In the Transparency box, enter 88%. Select the last stop in the slider, and then do the following: In the Position box, enter 99%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 134, Green: 56, and Blue: 8. In the Transparency box, enter 66%. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then do the following:Click Flip Horizontal.Click Flip Vertical.Position the two new freeform shapes in the bottom left corner of the slide area. Select one of the new freeform shapes. Drag the right sizing handle of the shapes to the left, decreasing the width by approximately 1/3. Note: To bring the center picture and caption to the front, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.Press and hold CTRL, and in the Selection and Visibility pane, select the picture and text box. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.