A letter from NY Dept. of Conservation Commissioner Joe Martens to the president of the Joint Landowners Coalition of New York (JLCNY). Gov. Andrew Cuomo asked Martens to respond to JLCNY's concerns over the latest delay--to allow for a health review--in releasing new fracking regulations.
Detection and Identification of Contaminations in the Manufacturing Process U...PerkinElmer, Inc.
Manufacturing processes are designed to create products that contain only the required components. Occasionally, foreign objects can appear within the final product as unexpected contaminations effecting product quality or even causing product failure. Investigation is required to determine what the contamination is and where it has originated. Infrared spectroscopy is one of the primary analytical techniques for the identification of materials. If the contaminant is large enough that it is visible to the naked eye then a simple (macro) IR measurement can usually be performed on the sample. In many industries, such as electronics and polymers, even micro-contaminants can cause product problems. IR microscopy allows samples as small as a few micrometers in size to be analyzed and identified and is the ideal solution for these types of problems. A range of IR microscope sampling modes (transmission, specular reflectance, and Attenuated Total Reflectance) allow spectra to be measured for contaminants in a variety of sample matrices. This Application Note describes the use of the Spotlight™ 200i system, an automated IR microscope for the detection and measurement of different types of contaminants in a range of manufactured samples.
A letter from NY Dept. of Conservation Commissioner Joe Martens to the president of the Joint Landowners Coalition of New York (JLCNY). Gov. Andrew Cuomo asked Martens to respond to JLCNY's concerns over the latest delay--to allow for a health review--in releasing new fracking regulations.
Detection and Identification of Contaminations in the Manufacturing Process U...PerkinElmer, Inc.
Manufacturing processes are designed to create products that contain only the required components. Occasionally, foreign objects can appear within the final product as unexpected contaminations effecting product quality or even causing product failure. Investigation is required to determine what the contamination is and where it has originated. Infrared spectroscopy is one of the primary analytical techniques for the identification of materials. If the contaminant is large enough that it is visible to the naked eye then a simple (macro) IR measurement can usually be performed on the sample. In many industries, such as electronics and polymers, even micro-contaminants can cause product problems. IR microscopy allows samples as small as a few micrometers in size to be analyzed and identified and is the ideal solution for these types of problems. A range of IR microscope sampling modes (transmission, specular reflectance, and Attenuated Total Reflectance) allow spectra to be measured for contaminants in a variety of sample matrices. This Application Note describes the use of the Spotlight™ 200i system, an automated IR microscope for the detection and measurement of different types of contaminants in a range of manufactured samples.
Elementos que conforman la identidad nacional Mexicana.
Acts extra 2010
1. ESCUELA SECUNDARIA DIURNA NÚM 231
“SIGMUND FREUD” T.V.
CALENDARIO DE ACTS. EXTRAESCOLARES
PROYECTO FECHAS COORDS. RESPONSABLES GRUPO ADICIONAL
Del 23 de agosto al 12 de Zeus, Karina, César, Braulio, Profrs. Maru, Gina, Genaro,
Línea del tiempo Bicentenaria 1° B, 1° A y 2° B
noviembre Lidia Víctor A., Víctor C.
Periódico biográfico del Del 12 de octubre al 18 de Ian, Hilde, Mitzy, Brandon,
Profr. Víctor Carretes
Centenario noviembre Abimael
Del 26 de octubre al 02de Karina, Zeus, Osorio,
Exposición de ofrendas Asesores de grupo
noviembre Geovanny
Mesa redonda y conferencia
Zeus, Karina, César, Braulio, Profra Herlinda O.
“El papel de la mujer durante Del 08 al 22 de noviembre Grupos de 1°
Lidia, Brandon Profr. Víctor Carretes
la Revolución Mexicana”
Pastorelas y/o concurso de Profrs. Maru, Gina, Genaro,
Del 13 al 20 de diciembre César, Braulio, Ian, Abimael 1° B, 1° A y 2° B
piñatas Víctor A., Víctor C.
Zeus, Karina, César, Braulio, Profrs. Maru, Gina, Genaro,
Práctica “prismas basálticos” 04 de febrero de 2011 Grupos de 1°, 2° y 3°
Ian, Brandon Víctor A., Víctor C.
Carteles “las Constituciones Del 23 de enero al 03 de Alicia, Luz, Hilde, Juan,
Profr. Víctor Carretes
de México” febrero Charely
Brandon, Hilde, Ian, César,
Ceremonias 16 de nov, 10 de julio Profr. Víctor Carretes
Geovanny
Periódico mural del día de las Luz, Osorio, Lidia, Juan,
Del 04 al 09 de mayo Profr. Víctor Carretes
Madres Geovanny
Periódico mural del día del
Del 11 al 13 de mayo Karina, Zeus, César Profr. Víctor Carretes
Maestro
Exposición de trajes típicos Profra. Consuelo Grupos de 1° y alumnas del
Del 27 de junio al 06 de julio Alicia, Braulio, Lidia
en México Profr. Víctor Carretes taller de Corte y confección
Muestra pedagógica Última semana de clases Brandon, Hilde, Ian Profr. Víctor Carretes
Sesiones de elección de esc. A partir de enero Braulio, César, Karina, Zeus Profr. Víctor Carretes 3° A
V.C.T.