El documento define el hardware como la parte física y tangible de un sistema informático, incluyendo componentes eléctricos, electrónicos y mecánicos como cables, gabinetes, periféricos y cualquier otro elemento físico. También describe las cuatro generaciones de hardware desde los primeros computadores con tubos de vacío hasta los circuitos integrados de silicio de hoy en día, anticipando que una futura cuarta generación podría reemplazar el silicio con un nuevo material o tecnología.
La necesidad de compartir datos hizo que se desarrollaran las redes de computadoras. Actualmente las telecomunicaciones y las redes de computadoras son un pilar sobre el cual se sostienen la mayoría de las operaciones que se realizan en una organización.
The Pneus GINEO is a plant designed and built to process, via pyrolysis, granular material obtained from the treatment of End of Life Tires. “Pyrolysis” is a process which induces thermal degradation (depolymerisation) of organic compounds in presence of heat and absence of oxygen.
Therefore there is no combustion. Granular rubber, obtained from End of Life Tires, is introduced by a conveyor belt in the loading hopper that will transfer it in the pyrolysis reactor after a pre-heating step.
The reactor is equipped with a motorized mixer that ensures that the heating of the granular rubber, by electronically programmed inductors, is accurate.
The granular product, once introduced in the reactor with a variable temperature. Will generate gas and char. Following the process of pyrolysis, the char is continuously discharged from a reactor nozzle and transferred under forced cooling to dedicated containers
While the gas of pyrolysis is introduced in air cooled heat exchangers where the condensed liquid phases are collected The heat exchangers condensing the gas of pyrolysis are equipped with ambient air cooled fins and are built in sections to allow an optimized fractioned condensation.
The liquid phase, following its transfer into collecting tanks, will undergo a 12 micron filtration to remove suspended solid The condensed phase (organic oils of different composition in the various stages) is collected in settling tanks
While the remaining gaseous phase is introduced in a water filled tank to be washed before being sent to energy generators
The generator group is modified to accept, as fuel, both liquid and gaseous phase generated by the pyrolysis
The generators are equipped with a catalyst that enables the conformance to environmental emission limits
All the components of the Pneus Gineo equipment are fabricated with special stainless steels
The operation of the system is controlled via a programmed electronic device
The design, fabrication and operation of the plant are in conformance with the EU regulations
Es un trabajo realizado para la Cátedra de "Producción Multimedial Digital", de la carrera de Comunicación Social de la Universidad Nacional de Misiones.
En ella, busco mostrar mi identidad digital, quién soy en la web y cómo, en un futuro, me gustaría que me vean y sea en la web, planteándome diversos objetivos en relación a mi formación como comunicador social.
La necesidad de compartir datos hizo que se desarrollaran las redes de computadoras. Actualmente las telecomunicaciones y las redes de computadoras son un pilar sobre el cual se sostienen la mayoría de las operaciones que se realizan en una organización.
The Pneus GINEO is a plant designed and built to process, via pyrolysis, granular material obtained from the treatment of End of Life Tires. “Pyrolysis” is a process which induces thermal degradation (depolymerisation) of organic compounds in presence of heat and absence of oxygen.
Therefore there is no combustion. Granular rubber, obtained from End of Life Tires, is introduced by a conveyor belt in the loading hopper that will transfer it in the pyrolysis reactor after a pre-heating step.
The reactor is equipped with a motorized mixer that ensures that the heating of the granular rubber, by electronically programmed inductors, is accurate.
The granular product, once introduced in the reactor with a variable temperature. Will generate gas and char. Following the process of pyrolysis, the char is continuously discharged from a reactor nozzle and transferred under forced cooling to dedicated containers
While the gas of pyrolysis is introduced in air cooled heat exchangers where the condensed liquid phases are collected The heat exchangers condensing the gas of pyrolysis are equipped with ambient air cooled fins and are built in sections to allow an optimized fractioned condensation.
The liquid phase, following its transfer into collecting tanks, will undergo a 12 micron filtration to remove suspended solid The condensed phase (organic oils of different composition in the various stages) is collected in settling tanks
While the remaining gaseous phase is introduced in a water filled tank to be washed before being sent to energy generators
The generator group is modified to accept, as fuel, both liquid and gaseous phase generated by the pyrolysis
The generators are equipped with a catalyst that enables the conformance to environmental emission limits
All the components of the Pneus Gineo equipment are fabricated with special stainless steels
The operation of the system is controlled via a programmed electronic device
The design, fabrication and operation of the plant are in conformance with the EU regulations
Es un trabajo realizado para la Cátedra de "Producción Multimedial Digital", de la carrera de Comunicación Social de la Universidad Nacional de Misiones.
En ella, busco mostrar mi identidad digital, quién soy en la web y cómo, en un futuro, me gustaría que me vean y sea en la web, planteándome diversos objetivos en relación a mi formación como comunicador social.
Pumice-based scrubs and soaps exfoliate without needing help from chemistry...or a lot of elbow grease, as a light-touch scrubbing is all that is needed for the microscopic surfaces of the pumice grit to do the job.
Presentación de power point acerca de las practicas realizadas en el laboratorio de informática, las practicas se encuentran realizadas y completadas con buena calificación, dichas practicas se encuentran con especificaciones e imágenes acerca del tema solicitado, se espera que con la información que se encuentra en la presentación se entienda el tema del que se habla y se espera que también sea de su agrado e interés, que les sirva para el estudio y la obtención de información para nuevos proyectos.
refiriéndose a los siguientes temas: .
1. Búsqueda de información
2. Linea del tiempo sobre las TIC
3. Búsqueda de información: personajes que ayudaron al desarrollo de las TIC
4. Creación de hipervinculos
5. Código ASCCI
6. Cuestionario cobre las TIC
2. se refiere a todas las partes físicas de
un sistema informático;
3. eléctricos, electrónicos, Electromecánicos y
mecánicos. Son cables, gabinetes o cajas
,periféricos de todo tipo y cualquier otro
elemento físico
4. el soporte lógico es intangible y es llamado
software
La Real Academia Española lo define como
«Conjunto de los componentes que integran
la parte material de una computadora
5. 1.ª Generación (1945-1956): electrónica implementada con tubos de vacío.
Fueron las primeras máquinas que desplazaron los componentes
electromecánicos (relés).
2.ª Generación (1957-1963): electrónica desarrollada con transistores. La
lógica discreta era muy parecida a la anterior, pero la implementación
resultó mucho más pequeña, reduciendo, entre otros factores, el tamaño
de un computador en notable escala.
6. 3.ª Generación (1964-hoy): electrónica basada en circuitos
integrados. Esta tecnología permitió integrar cientos de
transistores y otros componentes electrónicos en un único
circuito integrado impreso en una pastilla de silicio. Las
computadoras redujeron así considerablemente su costo,
consumo y tamaño, incrementándose su capacidad,
velocidad y fiabilidad, hasta producir máquinas como las que
existen en la actualidad.
4.ª Generación (futuro): probablemente se originará cuando
los circuitos de silicio, integrados a alta escala, sean
reemplazados por un nuevo tipo de material o tecnología.6