Este documento resume el proyecto Canaima de Venezuela. El proyecto consiste en la adquisición de 350 mil computadoras portátiles para estudiantes de primaria en Venezuela como parte de un contrato firmado entre Venezuela y Portugal. El objetivo del proyecto es promover la formación integral de los estudiantes a través del aprendizaje apoyado por tecnologías de información libre. Hasta ahora se han distribuido un millón de computadoras en escuelas públicas. El proyecto ha tenido un impacto positivo en la calidad de la educación pública al
The project included the realization on Soliworks of some tools to realize through 3D printing. The components had to respect some important characteristics in order to be being 3D printable
Pictures and drawings of the assembly are reported
Bachelor's Thesis: Use of CAD technologies to optimize the productivity of a ...Pietro Galli
The Thesis was developed during the Internship at Plurigest SRL. It deals with one of the projects done during that experience. In particular the aim of this was to provide a plant layout for a Pellet Heating system.
All the components of the plant were designed on Solidworks and AutoCAD. Then was performed a study of the layout of the components in order to provide best solution in terms of space used and functioning.
If you’d like discover more about this project in the attachment there is the pdf version of the thesis (Italian language) and some pictures. For more info please contact me
Study of a Gear-Rack and links System: Equations, configuration and CAD designPietro Galli
The study dealt with the Designing of a mechanism form a starting configuration. Development of equations (Study of the motion and of the velocities), CAD files and engineer drawings (Using Solidworks)
DATA PENGELUARAN TOGEL SINGAPURA 2016
DATA KELUARAN TOGEL SINGAPURA 2016
Data pengeluaran togel singapura 2015 Sampai 2016 | data pengeluaran togel sgp 2016 | data pengeluaran togel singapura 2016
http://www.dukunsantet.com/
During the course, we had to develop some projects and assemblies on CAD using the Advaced GT&D dimensioning system to label the work.
In the attachments are presented some of the final assembly and dimensions given to the products
Simulation of a small scale cogeneration system using a microturbinePietro Galli
The aim of the thesis was to develop an operating model of some sizes of Microturbines on the software eQuest.
Then used the model developed to simulate the installation of a Cogeneration (CHP) plant to satisfy the heat and electric demand of a school. The final step was to consider the economics of the investment and choosing which size and use of the turbine was the most convenient for the building.
The key topics of the project were the following:
• Collecting experimental data about some size of Microturbines
• Development of the turbine model for the software eQuest
• Development of the building following the ASHRAE standard
• Simulation of some size of Cogeneration Plants
• Analysis of the results of the simulations
• Energy auditing of the building and analysis of the cost of the current and new plant
• Choice of the best solution for the building
The thesis was developed in collaboration between Politecnico di Torino and the University of Illinois at Chicago, during the course of the double degree program TOP-UIC
Computation of a gearbox for a wind power plantPietro Galli
The project Computation of a Gearbox for a Wind Power Plant dealt with the study and the analysis of the Generator in order to provide data about the following characteristics
o Static Design of the gearbox:
Design of shaft 1
Design of bearings
Internal stresses
Safety factor
Design of shaft 2
o Fatigue analysis:
Shaft 1 section 3
Shaft 1 section 4
Shaft 2 section 1
Shaft 2 section 2
o Rolling bearings analysis, life and fatique:
Roller bearings C and D
Bearing E
Rating life_bearing D
Rating life_bearing E
o Spur gears analysis:
Computation of transmission ratio, pt and b
Tooth bending strength
Tooth surface fatigue strength
Design of a Handle Mechanism (Solidworks)Pietro Galli
The project was developped on Solidworks and dealt with the costruction of an Hadle mechanism, the study of its motion and the Finite Element Analysis (FEA) of the assembly.
Solar Energy Equipment: Design of a solar plant for a buildingPietro Galli
The project dealt with the design of a solar plant heating-system for a building. The following analysis were performed:
• Data collection and preliminary design: (building characteristics and geographical information)
• Estimation of the how water demand
• Evaluation of the Irradiance:
• Computation of the volume of the hot storage tank and definition of its insulation
• Off-Design Calculations
• F-chart
• Thermal balance of the solar panel
• Heat exchanger analysis
• Exergy Analysis for each component of the plant (Collectors, Tank, Boiler)
• Economics and cost analysis
• Determination of the temperature profile of the thermal fluid along the pipe (Using MatLab)
The project included the realization on Soliworks of some tools to realize through 3D printing. The components had to respect some important characteristics in order to be being 3D printable
Pictures and drawings of the assembly are reported
Bachelor's Thesis: Use of CAD technologies to optimize the productivity of a ...Pietro Galli
The Thesis was developed during the Internship at Plurigest SRL. It deals with one of the projects done during that experience. In particular the aim of this was to provide a plant layout for a Pellet Heating system.
All the components of the plant were designed on Solidworks and AutoCAD. Then was performed a study of the layout of the components in order to provide best solution in terms of space used and functioning.
If you’d like discover more about this project in the attachment there is the pdf version of the thesis (Italian language) and some pictures. For more info please contact me
Study of a Gear-Rack and links System: Equations, configuration and CAD designPietro Galli
The study dealt with the Designing of a mechanism form a starting configuration. Development of equations (Study of the motion and of the velocities), CAD files and engineer drawings (Using Solidworks)
DATA PENGELUARAN TOGEL SINGAPURA 2016
DATA KELUARAN TOGEL SINGAPURA 2016
Data pengeluaran togel singapura 2015 Sampai 2016 | data pengeluaran togel sgp 2016 | data pengeluaran togel singapura 2016
http://www.dukunsantet.com/
During the course, we had to develop some projects and assemblies on CAD using the Advaced GT&D dimensioning system to label the work.
In the attachments are presented some of the final assembly and dimensions given to the products
Simulation of a small scale cogeneration system using a microturbinePietro Galli
The aim of the thesis was to develop an operating model of some sizes of Microturbines on the software eQuest.
Then used the model developed to simulate the installation of a Cogeneration (CHP) plant to satisfy the heat and electric demand of a school. The final step was to consider the economics of the investment and choosing which size and use of the turbine was the most convenient for the building.
The key topics of the project were the following:
• Collecting experimental data about some size of Microturbines
• Development of the turbine model for the software eQuest
• Development of the building following the ASHRAE standard
• Simulation of some size of Cogeneration Plants
• Analysis of the results of the simulations
• Energy auditing of the building and analysis of the cost of the current and new plant
• Choice of the best solution for the building
The thesis was developed in collaboration between Politecnico di Torino and the University of Illinois at Chicago, during the course of the double degree program TOP-UIC
Computation of a gearbox for a wind power plantPietro Galli
The project Computation of a Gearbox for a Wind Power Plant dealt with the study and the analysis of the Generator in order to provide data about the following characteristics
o Static Design of the gearbox:
Design of shaft 1
Design of bearings
Internal stresses
Safety factor
Design of shaft 2
o Fatigue analysis:
Shaft 1 section 3
Shaft 1 section 4
Shaft 2 section 1
Shaft 2 section 2
o Rolling bearings analysis, life and fatique:
Roller bearings C and D
Bearing E
Rating life_bearing D
Rating life_bearing E
o Spur gears analysis:
Computation of transmission ratio, pt and b
Tooth bending strength
Tooth surface fatigue strength
Design of a Handle Mechanism (Solidworks)Pietro Galli
The project was developped on Solidworks and dealt with the costruction of an Hadle mechanism, the study of its motion and the Finite Element Analysis (FEA) of the assembly.
Solar Energy Equipment: Design of a solar plant for a buildingPietro Galli
The project dealt with the design of a solar plant heating-system for a building. The following analysis were performed:
• Data collection and preliminary design: (building characteristics and geographical information)
• Estimation of the how water demand
• Evaluation of the Irradiance:
• Computation of the volume of the hot storage tank and definition of its insulation
• Off-Design Calculations
• F-chart
• Thermal balance of the solar panel
• Heat exchanger analysis
• Exergy Analysis for each component of the plant (Collectors, Tank, Boiler)
• Economics and cost analysis
• Determination of the temperature profile of the thermal fluid along the pipe (Using MatLab)
La educación ha sido por siempre la base del éxito para los países, en Latinoamerica a pesar de la marginación en la educación, existen indudablemente importantes proyectos para mejorar día a día y lograr la meta en la educación.
Este trabajo fue realizado con el objetivo de dar a conocer algunos proyectos de investigación en los que se están trabajando.
Portafolio de servicios Centro de Educación Continua EPN
Proyecto canaima
1. REPÚBLICA BOLIVARIANA DE VENEZUELA.
UNIVERSIDAD PEDAGÓGICA EXPERIMENTAL LIBERTADOR
INSTITUTO PEDAGÓGICO DE MIRANDA
JOSÉ MANUEL SISO MARTÍNEZ.
INFORMÁTICA EDUCATIVA.
PROFESORA.
MARYENY PALLEN
ALUMNOS.
CASTILLO, CARLOS
ROPAIN, VANESSA.
LA URBINA, ABRIL 2016
2. ANTECEDENTES DEL PROYECTO
CANAIMA.
Contrato firmado entre la República Bolivariana de
Venezuela y la Republica de Portugal.
Se acordó la adquisición a de 350 mil computadoras
portátiles para la niñas y niños venezolanos.
El proyecto va dirigido a estudiantes de educación
primaria
Este cuenta con 66 contenidos con pertinencia curricular
(entre videos, juegos didácticos, interactivos y software
educativos)
3. OBJETIVOS DEL PROYECTO
CANAIMA
PROMOVER LA FORMACIÓN INTEGRAL DE LOS NIÑOS
Y NIÑAS VENEZOLANOS (AS) MEDIANTE EL
APRENDIZAJE LIBERADOR Y EMANCIPADOR APOYADO
POR LAS TECNOLOGÍAS DE INFORMACIÓN LIBRE.
PROMOVER EL DESARROLLO INTEGRAL DE LA
CIUDADANÍA EN CORRESPONDENCIA CON LOS FINES
E INTENCIONALIDADES EDUCATIVAS.
PROFUNDIZAR LA CONCRECIÓN DEL DESARROLLO
CURRICULAR PARA LA FORMACIÓN INTEGRAL Y CON
CALIDAD DE LA CIUDADANÍA VENEZOLANA.
TRANSFORMAR LA PRAXIS DOCENTE CON EL USO
CRÍTICO DE LAS TECNOLOGÍAS DE INFORMACIÓN
LIBRES.
DESARROLLO DE POTENCIALIDADES EN TECNOLOGÍA DE
INFORMACIÓN LIBRES PARA EL APOYO A LOS PROCESOS
EDUCATIVOS EN PRO DE LA SOBERANÍA Y LA INDEPENDENCIA
TECNOLÓGICA.
4. PROYECTO CANAIMA EN LA
ACTUALIDAD.
SE HAN DISTRIBUIDO EN LAS
ESCUELAS PÚBLICAS UN
MILLÓN DE COMPUTADORAS
5. IMPACTO SOCIAL Y PEDAGÓGICO
DEL PROYECTO CANAIMA.
SALTO CUÁNTICO EN LA CALIDAD DE LA EDUCACIÓN
PÚBLICA.
LOS AVANCES SE CENTRAN EN MEJORAS DE
LA CALIDAD DE LA ENSEÑANZA, Y NO
EXCLUSIVAMENTE DE CARÁCTER MATERIAL Y
DE INFRAESTRUCTURA.
PROMUEVE EL DESARROLLO DEL
PENSAMIENTO CRÍTICO, CREATIVO, Y
REFLEXIVO
SE ROMPEN LOS LÍMITES DEL SALÓN DE CLASE
TRADICIONAL.
