Materiales para fabricar de los leds
•Descargar como PPT, PDF•
0 recomendaciones•284 vistas
Los LED están hechos de una variedad de elementos químicos como boro, nitrógeno, aluminio, silicio, fósforo, galio, germanio, arsénico e indio. El color que producen depende de la combinación de estos elementos en el material, por ejemplo el galio y el fósforo se usan para LED rojos o verdes, y el silicio es un material fundamental en la electrónica moderna.
Denunciar
Compartir
Denunciar
Compartir
![[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recomendados
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como boro, nitrógeno, aluminio, silicio, fósforo, galio, germanio, arsénico e indio. El color que producen depende de la combinación de estos elementos en el material, por ejemplo el galio fosfuro (GaP) se usa para LED rojos o verdes.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como boro, carbono, nitrógeno, aluminio, silicio, fósforo, galio y germanio. Estos materiales se combinan para producir diferentes longitudes de onda de luz dependiendo de los elementos utilizados, y los LED pueden proveer luz de varios colores usando compuestos como el GaP para rojo o verde.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como nitrógeno, boro, carbono, aluminio, silicio, fósforo, galio, arsénico e indio. Los primeros LED usaban sustratos de GaP que absorbían luz, pero fueron reemplazados por sustratos de GaAs que son más transparentes y ayudan a emitir más luz. Los LED pueden producir luz de diferentes colores dependiendo de los compuestos utilizados, como el GaP para LED rojos o verdes.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como nitrógeno, boro, carbono, aluminio, silicio, fósforo, galio, arsénico e indio. Los primeros LED usaban sustratos de GaP que absorbían luz, pero fueron reemplazados por sustratos de GaAs que son más transparentes y ayudan a emitir más luz. Los LED pueden producir luz de diferentes colores dependiendo de los compuestos utilizados, como el GaP para LED rojos o verdes.
Sólidos cristalinos - Varios elementos
Este documento describe la estructura cristalina, propiedades y aplicaciones de cuatro elementos: silicio, germanio, galio. Explica que el silicio se utiliza ampliamente en la electrónica e industria de los semiconductores, mientras que el germanio y galio también se usan en aplicaciones electrónicas y ópticas, como fibra óptica, diodos y circuitos de microondas. Además, proporciona instrucciones para realizar una presentación sobre estos elementos usando PowerPoint e incluyendo referencias a las fuentes de
Desarrollo Organizacional De La Utes ComisióN Chiquita Ii
Este documento presenta la propuesta de modificación de la misión, visión, valores y estructura organizativa de la Unidad de Tecnología Educativa en Salud (UTES) de la Facultad de Ciencias Médicas de la Universidad Nacional Autónoma de Honduras. Se describen las funciones de los diferentes comités técnicos de la UTES enfocados en el mantenimiento de equipos, diseño de material educativo, recursos de aprendizaje, sistemas de información y edición de material, entre otros.
Nonlinear Static Analysis Of 3-D RC Framed Asymmetric Building With Lead Rubb...
Many buildings in the present scenario have irregular configurations both in plan and elevation. This in future may be subjected to devastating earthquakes. So it is also necessary to enhance the seismic performance of asymmetric buildings by using seismic control techniques. In the present study a total of 9 models, asymmetrical in plan (L-shape) are taken for analysis to cover the broader spectrum of low, medium & high rise buildings for the seismic control of the structures using pushover analysis, two different techniques were considered such as lead rubber bearing isolator and masonry infill walls, the analysis has been carried out using SAP2000V15. The results of bare frame and other building models have been compared, the presence of lead rubber base isolator, top story drift get reduced as compared with masonry infill wall. The trend was found to be reversed for high rise buildings especially with the application of isolation systems due to the massive increase in the story displacements suggesting the ineffectiveness of the base isolators for high rise buildings successively the plastic hinge pattern formed after carrying out the pushover analysis was also studied which indicated that structural performance was considerably improved.
Medical Image Fusion Using Discrete Wavelet Transform
Medical image fusion is the process of registering and combining multiple images from single or multiple imaging modalities to improve the imaging quality and reduce randomness and redundancy in order to increase the clinical applicability of medical images for diagnosis and assessment of medical problems. Multimodal medical image fusion algorithms and devices have shown notable achievements in improving clinical accuracy of decisions based on medical images. The domain where image fusion is readily used nowadays is in medical diagnostics to fuse medical images such as CT (Computed Tomography), MRI (Magnetic Resonance Imaging) and MRA. This paper aims to present a new algorithm to improve the quality of multimodality medical image fusion using Discrete Wavelet Transform (DWT) approach. Discrete Wavelet transform has been implemented using different fusion techniques including pixel averaging, maximum minimum and minimum maximum methods for medical image fusion. Performance of fusion is calculated on the basis of PSNR, MSE and the total processing time and the results demonstrate the effectiveness of fusion scheme based on wavelet transform.
Recomendados
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como boro, nitrógeno, aluminio, silicio, fósforo, galio, germanio, arsénico e indio. El color que producen depende de la combinación de estos elementos en el material, por ejemplo el galio fosfuro (GaP) se usa para LED rojos o verdes.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como boro, carbono, nitrógeno, aluminio, silicio, fósforo, galio y germanio. Estos materiales se combinan para producir diferentes longitudes de onda de luz dependiendo de los elementos utilizados, y los LED pueden proveer luz de varios colores usando compuestos como el GaP para rojo o verde.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como nitrógeno, boro, carbono, aluminio, silicio, fósforo, galio, arsénico e indio. Los primeros LED usaban sustratos de GaP que absorbían luz, pero fueron reemplazados por sustratos de GaAs que son más transparentes y ayudan a emitir más luz. Los LED pueden producir luz de diferentes colores dependiendo de los compuestos utilizados, como el GaP para LED rojos o verdes.
Materiales para fabricar de los leds
Los LED están hechos de una variedad de elementos químicos como nitrógeno, boro, carbono, aluminio, silicio, fósforo, galio, arsénico e indio. Los primeros LED usaban sustratos de GaP que absorbían luz, pero fueron reemplazados por sustratos de GaAs que son más transparentes y ayudan a emitir más luz. Los LED pueden producir luz de diferentes colores dependiendo de los compuestos utilizados, como el GaP para LED rojos o verdes.
Sólidos cristalinos - Varios elementos
Este documento describe la estructura cristalina, propiedades y aplicaciones de cuatro elementos: silicio, germanio, galio. Explica que el silicio se utiliza ampliamente en la electrónica e industria de los semiconductores, mientras que el germanio y galio también se usan en aplicaciones electrónicas y ópticas, como fibra óptica, diodos y circuitos de microondas. Además, proporciona instrucciones para realizar una presentación sobre estos elementos usando PowerPoint e incluyendo referencias a las fuentes de
Desarrollo Organizacional De La Utes ComisióN Chiquita Ii
Este documento presenta la propuesta de modificación de la misión, visión, valores y estructura organizativa de la Unidad de Tecnología Educativa en Salud (UTES) de la Facultad de Ciencias Médicas de la Universidad Nacional Autónoma de Honduras. Se describen las funciones de los diferentes comités técnicos de la UTES enfocados en el mantenimiento de equipos, diseño de material educativo, recursos de aprendizaje, sistemas de información y edición de material, entre otros.
Nonlinear Static Analysis Of 3-D RC Framed Asymmetric Building With Lead Rubb...
Many buildings in the present scenario have irregular configurations both in plan and elevation. This in future may be subjected to devastating earthquakes. So it is also necessary to enhance the seismic performance of asymmetric buildings by using seismic control techniques. In the present study a total of 9 models, asymmetrical in plan (L-shape) are taken for analysis to cover the broader spectrum of low, medium & high rise buildings for the seismic control of the structures using pushover analysis, two different techniques were considered such as lead rubber bearing isolator and masonry infill walls, the analysis has been carried out using SAP2000V15. The results of bare frame and other building models have been compared, the presence of lead rubber base isolator, top story drift get reduced as compared with masonry infill wall. The trend was found to be reversed for high rise buildings especially with the application of isolation systems due to the massive increase in the story displacements suggesting the ineffectiveness of the base isolators for high rise buildings successively the plastic hinge pattern formed after carrying out the pushover analysis was also studied which indicated that structural performance was considerably improved.
Medical Image Fusion Using Discrete Wavelet Transform
Medical image fusion is the process of registering and combining multiple images from single or multiple imaging modalities to improve the imaging quality and reduce randomness and redundancy in order to increase the clinical applicability of medical images for diagnosis and assessment of medical problems. Multimodal medical image fusion algorithms and devices have shown notable achievements in improving clinical accuracy of decisions based on medical images. The domain where image fusion is readily used nowadays is in medical diagnostics to fuse medical images such as CT (Computed Tomography), MRI (Magnetic Resonance Imaging) and MRA. This paper aims to present a new algorithm to improve the quality of multimodality medical image fusion using Discrete Wavelet Transform (DWT) approach. Discrete Wavelet transform has been implemented using different fusion techniques including pixel averaging, maximum minimum and minimum maximum methods for medical image fusion. Performance of fusion is calculated on the basis of PSNR, MSE and the total processing time and the results demonstrate the effectiveness of fusion scheme based on wavelet transform.
Asia In Night
O documento lista locais noturnos em vários países asiáticos, começando pela entrada na Ásia pelo Bósforo, e incluindo Dubai, Índia, Singapura, Malásia, Hong Kong, China, Taiwan, Japão. As principais atrações incluem o Burj al Arab em Dubai, o Taj Mahal na Índia, as Torres Petronas na Malásia, a Grande Muralha da China e locais em Hong Kong, Xangai e Tóquio.
Analysis of Two Way Simply Supported Slabs With Central Sunk Using Finite Ele...
Majority of the sunken slabs are constructed with supporting beams, which leads to the uneconomy of the structure and difficult in arrangement of the centering work. In this view, it is considered to analyze a two way simply supported slab of different thicknesses with central sunk having one sunk depths.The objective of the paper is to analyze a two way simply supported slab having different thicknesses of 125,150,175,and 200mm with central sunk having depths of 250mm using Finite Element Analysis. This study significantly concludes that, adopting FE analysis using STAAD Pro for analysis of two-way sunken slab is advisable. By using FE analysis using STAAD Pro, we can avoid tedious and lengthy procedure of manual methods. From the chosen sunken slab it was observed that, there is decrease in sagging moments for sunk size of 0.25lx x 0.25ly with respect to two way slab without sunk.
Direct Torque Control of Induction Motor Drive Fed from a Photovoltaic Multil...
This paper presents Direct Torque Control (DTC) using Space Vector Modulation (SVM) for an induction motor drive fed from a photovoltaic multilevel inverter (PV-MLI). The system consists of two main parts PV DC power supply (PVDC) and MLI. The PVDC is used to generate DC isolated sources with certain ratios suitable for the adopted MLI. Beside the hardware system, the control system which uses the torque and speed estimation to control the load angle and to obtain the appropriate flux vector trajectory from which the voltage vector is directly derived based on direct torque control methods. The voltage vector is then generated by a hybrid multilevel inverter by employing space vector modulation (SVM). The inverter high quality output voltage which leads to a high quality IM performances. Besides, the MLI switching losses is very low due to most of the power cell switches are operating at nearly fundamental frequency. Some selected simulation results are presented for system validation.
On Semi-Invariant Submanifolds of a Nearly Hyperbolic Kenmotsu Manifold with ...
We consider a nearly hyperbolic Kenmotsu manifold admitting a semi-symmetric metric connection and study semi-invariant submanifolds of a nearly hyperbolic Kenmotsu manifold with semi-symmetric metric connection. We also find the integrability conditions of some distributions on nearly hyperbolic Kenmotsu manifold andstudy parallel distributions on nearly hyperbolic Kenmotsu manifold.
Impacts of Urban Land use changes on flood events in Warri, Delta State Nigeria
This document summarizes a study that analyzed land use changes in Warri, Nigeria between 1987 and 2007 using remote sensing data and GIS techniques. It found that the built-up area increased from 83.15km2 to 236.76km2 over this period, with vegetation and marginal lands being converted to residential areas. This increased impervious surfaces and reduced drainage capacity, exacerbating urban flooding. The document also describes administering questionnaires to residents to understand perceptions of flooding and its impacts on livelihoods. Statistical analysis found a relationship between increased urbanization and more frequent flooding.
Effect Of Cuo-Distilled Water Based Nanofluids On Heat Transfer Characteristi...
In this paper, the heat transfer and pressure drop characteristics of the distilled water and the copper oxide-distilled water based nanofluid flowing in a horizontal circular pipe under constant heat flux condition are studied. Copper oxide nanoparticles of 40nm size are dispersed in distilled water using sodium dodecyl sulphate as surfactant and sonicated the nanofluid for three hour. Both surfactant and sonication increases the stability of the nanofluid. The nanofluids are made in three different concentration i.e. 0.1 Vol. %, 0.25 Vol. % and 0.50 Vol. %. The thermal conductivity is measured by KD2 PRO, density with pycnometer, viscosity with Brookfield LVDV-III rheometer. The results show that the thermal conductivity increases with both temperature and concentration. The viscosity and density increases with concentration but decreases with temperature. The specific heat is calculated by model and it decreases with concentration. The experimental local Nusselt number of distilled water is compared with local Nusselt number obtained by the well known shah equation for laminar flow under constant heat flux condition for validation of the experimental set up. The relative error is 4.48 % for the Reynolds number 750.9. The heat transfer coefficient increases with increase in both flow rate and concentration. It increases from 14.33 % to 46.1 % when the concentration is increased from 0.1 Vol. % to 0.5 Vol. % at 20 LPH flow rate. Friction factor decreases with increase in flow rate. It decreases 66.54 % when the flow rate increases from 10 LPH to 30 LPH for 0.1 Vol. %.
Grid-Connected Pv-Fc Hybrid System Power Control Using Mppt And Boost Converter
This paper proposes a method for operating a grid connected hybrid system. This system composed of a Photovoltaic (PV) array and a Proton exchange membrane fuel cell (PEMFC) is considered. As the variations occur in temperature and irradiation during power delivery to load, Photo voltaic (PV) system becomes uncontrollable. In coordination with PEMFC, the hybrid system output power becomes controllable. Two operation modes are the unit-power control (UPC) mode and the feeder-flow control (FFC) mode, can be applied to the hybrid system. All MPPT methods follow the same goal that is maximizing the PV system output power by tracking the maximum power on every operating condition. Maximum power point tracking technique (Incremental conductance) for photovoltaic systems was introduced to maximize the produced energy. The coordination of two control modes, coordination of the PV array and the PEMFC in the hybrid system, and determination of reference parameters are presented. The proposed operating strategy systems with a flexible operation mode change always operate the PV array at maximum output power and the PEMFC in its high efficiency performance band. Also thus improving the performance of system operation, enhancing system stability, and reducing the number of operating mode changes.
Las tics
Las Tecnologías de la Información y la Comunicación (TIC) surgieron en los años 60 y se han ido desarrollando desde entonces. Las TIC permiten la adquisición, producción, almacenamiento, tratamiento y comunicación de información a través de dispositivos electrónicos. Su uso en la educación ha traído cambios como la creación de infraestructura tecnológica en las escuelas, el uso de recursos digitales en el aprendizaje, y la necesidad de actualizar constantemente a los docentes.
Enfermedades exatemáticas en la infancia
El documento describe los síntomas de una enfermedad que incluyen manchas de Koplik, signo de Forchheimer, y eritema simétrico de manos y pies.
Non-Linear Static Analysis of G+6 Storeyed RC Buildings with Openings in Infi...
Masonry infill walls are commonly used in the RC frame structure buildings. Openings are inevitable part of the infill walls. Openings in infill walls significantly decrease the lateral strength and stiffness of RC frames. In the present study two-dimensional seven storeyed reinforced concrete (RC) building models are considered with of (5%, 25%, and 35% openings Bare frame and soft storey buildings are modeled considering special moment resisting frame (SMRF) for medium soil profile and zone III. Concrete block infill walls are modeled as pin-jointed single equivalent diagonal strut. Pushover analysis is carried out for both default and user defined hinge properties as per FEMA 440 guidelines using SAP2000 software. Results of default and user defined hinge properties are studied by pushover analysis. The results of ductility ratio, safety ratio, global stiffness, and hinge status at performance point are compared with the models. Authors conclude that as the percentage of openings increases, vulnerability increases in the infill walls. The user-defined hinge model is better than the default-hinge model in reflecting nonlinear behavior. The misuse of default-hinge properties may lead to unreasonable displacement capacities for existing structures. However, if the default-hinge model is preferred due to simplicity, the user should be aware of what is provided in the program and should avoid the misuse of default-hinge properties.
Leadership et all
This document repeatedly mentions the name Zainul Mukhtar from the year 2012. It consists solely of the phrase "Zainul Mukhtar 2012" written multiple times, with no other context or information provided. The document appears to focus on this individual from that year, but no other details are given.
Organización
Este documento ofrece recomendaciones para organizar el aula y trabajar con alumnos que tienen trastorno por déficit de atención con o sin hiperactividad (TDAH). Se sugiere eliminar distracciones en el aula, situar al alumno cerca del maestro y otros compañeros, y usar tecnología para motivar el aprendizaje. También recomienda trabajar en grupos pequeños, cambiar actividades con frecuencia, incluir actividades grupales, y enfocarse en los intereses del alumno para lograr los objetivos acadé
CINE COMO RECURSO DIDÁCTICO para utilizar en TUTORÍA
Dos cortos y ocho películas para tratar en el aula.
La necesidad de bienestar y el uso de la naturaleza.pdf
La necesidad de bienestar y el uso de la naturaleza
Más contenido relacionado
Destacado
Asia In Night
O documento lista locais noturnos em vários países asiáticos, começando pela entrada na Ásia pelo Bósforo, e incluindo Dubai, Índia, Singapura, Malásia, Hong Kong, China, Taiwan, Japão. As principais atrações incluem o Burj al Arab em Dubai, o Taj Mahal na Índia, as Torres Petronas na Malásia, a Grande Muralha da China e locais em Hong Kong, Xangai e Tóquio.
Analysis of Two Way Simply Supported Slabs With Central Sunk Using Finite Ele...
Majority of the sunken slabs are constructed with supporting beams, which leads to the uneconomy of the structure and difficult in arrangement of the centering work. In this view, it is considered to analyze a two way simply supported slab of different thicknesses with central sunk having one sunk depths.The objective of the paper is to analyze a two way simply supported slab having different thicknesses of 125,150,175,and 200mm with central sunk having depths of 250mm using Finite Element Analysis. This study significantly concludes that, adopting FE analysis using STAAD Pro for analysis of two-way sunken slab is advisable. By using FE analysis using STAAD Pro, we can avoid tedious and lengthy procedure of manual methods. From the chosen sunken slab it was observed that, there is decrease in sagging moments for sunk size of 0.25lx x 0.25ly with respect to two way slab without sunk.
Direct Torque Control of Induction Motor Drive Fed from a Photovoltaic Multil...
This paper presents Direct Torque Control (DTC) using Space Vector Modulation (SVM) for an induction motor drive fed from a photovoltaic multilevel inverter (PV-MLI). The system consists of two main parts PV DC power supply (PVDC) and MLI. The PVDC is used to generate DC isolated sources with certain ratios suitable for the adopted MLI. Beside the hardware system, the control system which uses the torque and speed estimation to control the load angle and to obtain the appropriate flux vector trajectory from which the voltage vector is directly derived based on direct torque control methods. The voltage vector is then generated by a hybrid multilevel inverter by employing space vector modulation (SVM). The inverter high quality output voltage which leads to a high quality IM performances. Besides, the MLI switching losses is very low due to most of the power cell switches are operating at nearly fundamental frequency. Some selected simulation results are presented for system validation.
On Semi-Invariant Submanifolds of a Nearly Hyperbolic Kenmotsu Manifold with ...
We consider a nearly hyperbolic Kenmotsu manifold admitting a semi-symmetric metric connection and study semi-invariant submanifolds of a nearly hyperbolic Kenmotsu manifold with semi-symmetric metric connection. We also find the integrability conditions of some distributions on nearly hyperbolic Kenmotsu manifold andstudy parallel distributions on nearly hyperbolic Kenmotsu manifold.
Impacts of Urban Land use changes on flood events in Warri, Delta State Nigeria
This document summarizes a study that analyzed land use changes in Warri, Nigeria between 1987 and 2007 using remote sensing data and GIS techniques. It found that the built-up area increased from 83.15km2 to 236.76km2 over this period, with vegetation and marginal lands being converted to residential areas. This increased impervious surfaces and reduced drainage capacity, exacerbating urban flooding. The document also describes administering questionnaires to residents to understand perceptions of flooding and its impacts on livelihoods. Statistical analysis found a relationship between increased urbanization and more frequent flooding.
Effect Of Cuo-Distilled Water Based Nanofluids On Heat Transfer Characteristi...
In this paper, the heat transfer and pressure drop characteristics of the distilled water and the copper oxide-distilled water based nanofluid flowing in a horizontal circular pipe under constant heat flux condition are studied. Copper oxide nanoparticles of 40nm size are dispersed in distilled water using sodium dodecyl sulphate as surfactant and sonicated the nanofluid for three hour. Both surfactant and sonication increases the stability of the nanofluid. The nanofluids are made in three different concentration i.e. 0.1 Vol. %, 0.25 Vol. % and 0.50 Vol. %. The thermal conductivity is measured by KD2 PRO, density with pycnometer, viscosity with Brookfield LVDV-III rheometer. The results show that the thermal conductivity increases with both temperature and concentration. The viscosity and density increases with concentration but decreases with temperature. The specific heat is calculated by model and it decreases with concentration. The experimental local Nusselt number of distilled water is compared with local Nusselt number obtained by the well known shah equation for laminar flow under constant heat flux condition for validation of the experimental set up. The relative error is 4.48 % for the Reynolds number 750.9. The heat transfer coefficient increases with increase in both flow rate and concentration. It increases from 14.33 % to 46.1 % when the concentration is increased from 0.1 Vol. % to 0.5 Vol. % at 20 LPH flow rate. Friction factor decreases with increase in flow rate. It decreases 66.54 % when the flow rate increases from 10 LPH to 30 LPH for 0.1 Vol. %.
Grid-Connected Pv-Fc Hybrid System Power Control Using Mppt And Boost Converter
This paper proposes a method for operating a grid connected hybrid system. This system composed of a Photovoltaic (PV) array and a Proton exchange membrane fuel cell (PEMFC) is considered. As the variations occur in temperature and irradiation during power delivery to load, Photo voltaic (PV) system becomes uncontrollable. In coordination with PEMFC, the hybrid system output power becomes controllable. Two operation modes are the unit-power control (UPC) mode and the feeder-flow control (FFC) mode, can be applied to the hybrid system. All MPPT methods follow the same goal that is maximizing the PV system output power by tracking the maximum power on every operating condition. Maximum power point tracking technique (Incremental conductance) for photovoltaic systems was introduced to maximize the produced energy. The coordination of two control modes, coordination of the PV array and the PEMFC in the hybrid system, and determination of reference parameters are presented. The proposed operating strategy systems with a flexible operation mode change always operate the PV array at maximum output power and the PEMFC in its high efficiency performance band. Also thus improving the performance of system operation, enhancing system stability, and reducing the number of operating mode changes.
Las tics
Las Tecnologías de la Información y la Comunicación (TIC) surgieron en los años 60 y se han ido desarrollando desde entonces. Las TIC permiten la adquisición, producción, almacenamiento, tratamiento y comunicación de información a través de dispositivos electrónicos. Su uso en la educación ha traído cambios como la creación de infraestructura tecnológica en las escuelas, el uso de recursos digitales en el aprendizaje, y la necesidad de actualizar constantemente a los docentes.
Enfermedades exatemáticas en la infancia
El documento describe los síntomas de una enfermedad que incluyen manchas de Koplik, signo de Forchheimer, y eritema simétrico de manos y pies.
Non-Linear Static Analysis of G+6 Storeyed RC Buildings with Openings in Infi...
Masonry infill walls are commonly used in the RC frame structure buildings. Openings are inevitable part of the infill walls. Openings in infill walls significantly decrease the lateral strength and stiffness of RC frames. In the present study two-dimensional seven storeyed reinforced concrete (RC) building models are considered with of (5%, 25%, and 35% openings Bare frame and soft storey buildings are modeled considering special moment resisting frame (SMRF) for medium soil profile and zone III. Concrete block infill walls are modeled as pin-jointed single equivalent diagonal strut. Pushover analysis is carried out for both default and user defined hinge properties as per FEMA 440 guidelines using SAP2000 software. Results of default and user defined hinge properties are studied by pushover analysis. The results of ductility ratio, safety ratio, global stiffness, and hinge status at performance point are compared with the models. Authors conclude that as the percentage of openings increases, vulnerability increases in the infill walls. The user-defined hinge model is better than the default-hinge model in reflecting nonlinear behavior. The misuse of default-hinge properties may lead to unreasonable displacement capacities for existing structures. However, if the default-hinge model is preferred due to simplicity, the user should be aware of what is provided in the program and should avoid the misuse of default-hinge properties.
Leadership et all
This document repeatedly mentions the name Zainul Mukhtar from the year 2012. It consists solely of the phrase "Zainul Mukhtar 2012" written multiple times, with no other context or information provided. The document appears to focus on this individual from that year, but no other details are given.
Organización
Este documento ofrece recomendaciones para organizar el aula y trabajar con alumnos que tienen trastorno por déficit de atención con o sin hiperactividad (TDAH). Se sugiere eliminar distracciones en el aula, situar al alumno cerca del maestro y otros compañeros, y usar tecnología para motivar el aprendizaje. También recomienda trabajar en grupos pequeños, cambiar actividades con frecuencia, incluir actividades grupales, y enfocarse en los intereses del alumno para lograr los objetivos acadé
Destacado (20)
Analysis of Two Way Simply Supported Slabs With Central Sunk Using Finite Ele...
Analysis of Two Way Simply Supported Slabs With Central Sunk Using Finite Ele...
Direct Torque Control of Induction Motor Drive Fed from a Photovoltaic Multil...
Direct Torque Control of Induction Motor Drive Fed from a Photovoltaic Multil...
On Semi-Invariant Submanifolds of a Nearly Hyperbolic Kenmotsu Manifold with ...
On Semi-Invariant Submanifolds of a Nearly Hyperbolic Kenmotsu Manifold with ...
Impacts of Urban Land use changes on flood events in Warri, Delta State Nigeria
Impacts of Urban Land use changes on flood events in Warri, Delta State Nigeria
Effect Of Cuo-Distilled Water Based Nanofluids On Heat Transfer Characteristi...
Effect Of Cuo-Distilled Water Based Nanofluids On Heat Transfer Characteristi...
Grid-Connected Pv-Fc Hybrid System Power Control Using Mppt And Boost Converter
Grid-Connected Pv-Fc Hybrid System Power Control Using Mppt And Boost Converter
Non-Linear Static Analysis of G+6 Storeyed RC Buildings with Openings in Infi...
Non-Linear Static Analysis of G+6 Storeyed RC Buildings with Openings in Infi...
Último
CINE COMO RECURSO DIDÁCTICO para utilizar en TUTORÍA
Dos cortos y ocho películas para tratar en el aula.
La necesidad de bienestar y el uso de la naturaleza.pdf
La necesidad de bienestar y el uso de la naturaleza
MATERIAL ESCOLAR 2024-2025 3 AÑOS CEIP SAN CRISTÓBAL
MATERIAL ESCOLAR 2024-2025 3 AÑOS CEIP SAN CRISTÓBAL
Hablemos de ESI para estudiantes Cuadernillo
Cuadernillo Hablemos de ESI para estudiantes del nivel secundario
Este documento contiene, el programa completo de un acto para realizar la pro...
acto promesa de lealtad a la bandera
p4s.co Ecosistema de Ecosistemas - Diagrama.pdf
Ofrecemos herramientas y metodologías para que las personas con ideas de negocio desarrollen un prototipo que pueda ser probado en un entorno real.
Cada miembro puede crear su perfil de acuerdo a sus intereses, habilidades y así montar sus proyectos de ideas de negocio, para recibir mentorías .
FEEDBACK DE LA ESTRUCTURA CURRICULAR- 2024.pdf
José Luis Jiménez Rodríguez
Junio 2024.
“La pedagogía es la metodología de la educación. Constituye una problemática de medios y fines, y en esa problemática estudia las situaciones educativas, las selecciona y luego organiza y asegura su explotación situacional”. Louis Not. 1993.
Soluciones Examen de Selectividad. Geografía junio 2024 (Convocatoria Ordinar...
Criterios de corrección y soluciones al examen de Geografía de Selectividad (EvAU) Junio de 2024 en Castilla La Mancha.
Soluciones al examen.
Convocatoria Ordinaria.
Examen resuelto de Geografía
conocer el examen de geografía de julio 2024 en:
https://blogdegeografiadejuan.blogspot.com/2024/06/soluciones-examen-de-selectividad.html
http://blogdegeografiadejuan.blogspot.com/
Escuela Sabática. El conflicto inminente.pdf
El poder político se puede usar para crear una norma, e imponer la ley.
Gracias papá voz mujer_letra y acordes de guitarra.pdf
Puedes encontrar el video y el archivo para descargar en mi blog:
https://labitacoradeann.blogspot.com/2024/06/gracias-papa.html
Business Plan -rAIces - Agro Business Tech
Innovación y transparencia se unen en un nuevo modelo de negocio para transformar la economia popular agraria en una agroindustria. Facilitamos el acceso a recursos crediticios, mejoramos la calidad de los productos y cultivamos un futuro agrícola eficiente y sostenible con tecnología inteligente.
Carnavision: anticipa y aprovecha - hackathon Pasto2024 .pdf
Carnavision: anticipa y aprovecha - hackathon Pasto2024 .pdf
Compartir p4s.co Pitch Hackathon Template Plantilla final.pptx-2.pdf
En la ciudad de Pasto, estamos revolucionando el acceso a microcréditos y la formalización de microempresarios informales con nuestra aplicación CrediAvanza. Nuestro objetivo es empoderar a los emprendedores locales proporcionándoles una plataforma integral que facilite el acceso a servicios financieros y asesoría profesional.
Último (20)
CINE COMO RECURSO DIDÁCTICO para utilizar en TUTORÍA
CINE COMO RECURSO DIDÁCTICO para utilizar en TUTORÍA
La necesidad de bienestar y el uso de la naturaleza.pdf
La necesidad de bienestar y el uso de la naturaleza.pdf
Presentación de proyecto en acuarela moderna verde.pdf
Presentación de proyecto en acuarela moderna verde.pdf
MATERIAL ESCOLAR 2024-2025 3 AÑOS CEIP SAN CRISTÓBAL
MATERIAL ESCOLAR 2024-2025 3 AÑOS CEIP SAN CRISTÓBAL
Este documento contiene, el programa completo de un acto para realizar la pro...
Este documento contiene, el programa completo de un acto para realizar la pro...
Soluciones Examen de Selectividad. Geografía junio 2024 (Convocatoria Ordinar...
Soluciones Examen de Selectividad. Geografía junio 2024 (Convocatoria Ordinar...
200. Efemerides junio para trabajar en periodico mural
200. Efemerides junio para trabajar en periodico mural
Gracias papá voz mujer_letra y acordes de guitarra.pdf
Gracias papá voz mujer_letra y acordes de guitarra.pdf
Evaluacion-Formativa-Nueva Escuela Mexicana NEM-ok.pdf
Evaluacion-Formativa-Nueva Escuela Mexicana NEM-ok.pdf
Carnavision: anticipa y aprovecha - hackathon Pasto2024 .pdf
Carnavision: anticipa y aprovecha - hackathon Pasto2024 .pdf
Compartir p4s.co Pitch Hackathon Template Plantilla final.pptx-2.pdf
Compartir p4s.co Pitch Hackathon Template Plantilla final.pptx-2.pdf
Materiales para fabricar de los leds
- 1. MATERIALES PARA FABRICAR LED
- 3. LOS LED ESTÁN HECHOS DE UNA GRAN VARIEDAD DE ELEMENTOS QUÍMICOS, ENTRE ESTOS SE ENCUENTRAN: Boro http://es.wikipedia.org/wiki/Boro Nitrógeno http://es.wikipedia.org/wiki/Nitrogeno Aluminio http://es.wikipedia.org/wiki/Aluminio Silicio http://es.wikipedia.org/wiki/Silicio Fosforo http://es.wikipedia.org/wiki/Fosforo Galio http://es.wikipedia.org/wiki/Galio Germanio http://es.wikipedia.org/wiki/Germanio Arsénico http://es.wikipedia.org/wiki/Arsenico Indio http://es.wikipedia.org/wiki/Indio Carbono http://es.wikipedia.org/wiki/Carbono
- 9. FIN