Amorphous solids lack long-range order but have atomic and nanoscale structural and chemical features that define many of their properties. This presentation describes the structure of important classes of amorphous materials, the geometrical and chemical concepts that govern the structure, and discusses experimental methods that enable precise characterization of structural parameters.
Presented by Dr. Paul Voyles and Dr. Paul Evans.
Amorphous solids lack long-range order but have atomic and nanoscale structural and chemical features that define many of their properties. This presentation describes the structure of important classes of amorphous materials, the geometrical and chemical concepts that govern the structure, and discusses experimental methods that enable precise characterization of structural parameters.
Presented by Dr. Paul Voyles and Dr. Paul Evans.
The Most Complete Interpretation of Anode Materials Standards for Lithium-ion...etekware
To promote the healthy development of the lithium industry, China has successively promulgated relevant standards since 2009, involving raw materials, products and testing methods. Specifically, it proposes specific indicators for each parameter and the corresponding testing methods, which guided the production and application of anode materials. The types of anode materials in practical application are concentrated (graphite and Li4Ti5O12), related to four standards. Now, there are six standards under development or revision, indicating that the variety of anode materials has increased and new standards are needed to regulate their development. This article will focus on the main points of the four promulgated standards.
The Most Complete Interpretation of Anode Materials Standards for Lithium-ion...etekware
To promote the healthy development of the lithium industry, China has successively promulgated relevant standards since 2009, involving raw materials, products and testing methods. Specifically, it proposes specific indicators for each parameter and the corresponding testing methods, which guided the production and application of anode materials. The types of anode materials in practical application are concentrated (graphite and Li4Ti5O12), related to four standards. Now, there are six standards under development or revision, indicating that the variety of anode materials has increased and new standards are needed to regulate their development. This article will focus on the main points of the four promulgated standards.
Using cathodoluminescence in nanotechnology has been and remains a cornerstone in the development of light emitting diodes and laser diodes with high light intensity. Optoelectronic semiconductors based on nitrides such as AlN, GaN, InN and its alloys have wide forbidden bands ranging from 6.2 (AlN) 0.7 eV (InN), covering the visible spectral range. Today, there is great difficulty in obtaining devices that emit light at longer wavelengths (green-yellow). This is especially due to: (1) compositional instability and phase separation, and (2) the difference in lattice parameters limiting indium incorporation at the interfaces InGaN / GaN and produces piezoelectric fields which separate the carriers (electrons and holes) thereby decreasing the efficiency recombine.
With cathodoluminescence, one can obtain images and spectra with high resolution that show the phase difference and the separation of carriers in quantum wells, respectively. Additionally, one can measure the time of excitation and de-excitation of the recombination of electrons and holes with high temporal resolution via time-resolved cathodoluminescence.
Cathodoluminescence microscopy combined with the electronic transmission and electronic holography provides a correlation of optical properties, structural, and electronic semiconductors which facilitates the researcher in analyzing and solving the physical nature of these materials.
Se presenta uno de los polímeros que ha ido evolucionando gracias a la tecnología, y por ende ayudar a la utilización de nuevos componentes para la construcción en general.
Dios es uno, pero en voluntad, poder y divinidad. Más está formado por tres seres diferentes que forman la unidad perfecta ya mencionada. Esto se puede ver a lo largo de la biblia
Convocatoria de becas de Caja Ingenieros 2024 para cursar el Máster oficial de Ingeniería de Telecomunicacion o el Máster oficial de Ingeniería Informática de la UOC
1. Diodos Emisores de Luz
Orgánicos (OLEDs)
POR:
Álvaro Y. Gómez Peñuela
Estefanía Martínez Correa
Laura A. Sabogal Moncada
Universidad PontifiCIa Bolivariana
Facultad de Ingeniería en Nanotecnología
2. INTRODUCCIÓN
Historia
1987
Steven Van Slyke y Ching W. Tang
OLEDs:
↑ Eficiencia de electroluminiscencia
↑ Brillo
↓ Voltaje
1990
LEDs poliméricos con una capa de
poli(p-fenileno vinileno) (PPV): LEDs
de mayor área a menor costo
Monómero del PPV
1998
Uso de materiales fosforescentes como
centro de emisión: eficiencia cuántica
teórica del 100 %
Tiempo de la alta eficiencia de los OLEDs
J. Wang et al., “Key issues and recent progress of high efficient organic light-emitting diodes,” J. Photochem.
Photobiol. C Photochem. Rev., vol. 17, pp. 69–104, 2013.
3. ¿Qué es un OLEDs?
Organic Light Emitting Diode
cátodo
ánodo
sustrato
Moléculas
orgánicas
moléculas orgánicas conductoras (deslocalización de los
electrones π)
los OLEDs son superficies emisoras.
LEDs:
candela (cd)
OLEDs:
luminancia (cd/m2)
Dos tipos: SMOLED y P-OLED: La diferencia está en los
métodos de preparación
6. APLICACIONES
Optoelectrónica
Microdisplays:
• 852 x 600 y 1280 x 1024 pixeles
• Monocromáticas o policromáticas
• Amplio rango de tamaños
• Rango de brillo: 200 – 5500 cd/m2
• Rango de tiempo de operacion: 11000 - 410000 h
Pantallas planas:
• Bajos costos de fabricación
• Bajo peso y flexibilidad
• Mejor eficiencia energética
• Tiempos de respuesta altos
7. APLICACIONES
Optoelectrónica
WOLEDs para generación de iluminación en estado
sólido:
• Páneles de área grande
• Páneles de alta eficiencia: 20 lm/W
• Brillo de 2000 cd/m2
• Poder de eficiencia levemente menor al de los
tubos de fluorescencia pero menores costos de
fabricación
8. APLICACIONES
Sensores biológicos y químicos
Los OLEDs pueden ser fabricados a bajas
temperaturas
Pueden ser fácilmente integrados en casi cualquier
sustrato
Son ultradelgados por lo que permiten la
optimización del tamaño
Puede ser modificado químicamente para obtener
una amplia gama del espectro óptico
Se pueden depositar sobre sustratos poliméricos
flexibles
Bajos costos de fabricación
9. LO DE LAURA
• Te puede servir:
Los ánodos se eligen según la calidad de su transparencia óptica,
conductividad eléctrica y estabilidad química.
La capa debe tener buenas propiedades de agujero y transporte de
electrones.
• Laura, la estructura esta en la hoja 3, así no que necesitas buscarla,
más bien los materiales.
10. Principio de operación de
los OLEDs
incandescencia
luminiscencia
fosforescencia
fluorescencia
Para crear luz se
debe suministrar
una forma de
energía
Recordando…
Ánodo huecos
Cátodo electrones
1; 2 y 3 capas de material orgánico
Capa emisora; es principalmente el sitio de la
recombinación electroluminiscencia
11. Principio de operación de los OLEDs
Se aplica un
voltaje al OLEDs
para polarizar
El nivel de fermi sube al aplicar V
espesor de la barrera controlable
tunelado de
emisión de campo
FowlerNordheim
La recombinación
Forma un excitón
hv
el principio de funcionamiento
de ambos tipos de OLEDs son
básicamente los mismos
12. BIBLIOGRAFÍA:
• J. Wang et al., “Key issues and recent progress of high efficient organic light-emitting diodes,” J. Photochem.
Photobiol. C Photochem. Rev., vol. 17, pp. 69–104, 2013.
• . T. Kalyani, H. Swart, and S. J. Dhoble, Principles and Applications of Organic Light Emitting Diodes (OLEDs).
Elsevier, 2017.
• M. Ramuz, L. B??rgi, R. Stanley, and C. Winnewisser, “Coupling light from an organic light emitting diode (OLED)
into a single-mode waveguide: Toward monolithically integrated optical sensors,” J. Appl. Phys., vol. 105, no. 8,
2009.
• H. Milestones, M. Processes, and B. Processes, “1.04 - An overview of organic light-emitting diodes and their
applications,” in Comprehensive Nanoscience and Technology, 2011, pp. 73–107.
- 1987: Slyke y Tang presentaron los primeros LEDs orgánicos fabricados con película delgada con una alta eficiencia de electroluminiscencia, alto brillo y funcionamiento a bajo voltaje
cd/m: candela por metro
eMagin fue la primera en fabricar un microdisplay OLED
Iluminación en estado sólido: iluminación en la que se emplean dispositivos como diodos emisores de luz, diodos emisores de luz orgánicos o diodos emisores de luz basados en polímeros como fuente de iluminación en posición a los sistemas que utilizan filamentos o gases. El término sólido hace referencia al hecho de que la luz de un dispositivo de estado sólido es emitida por un objeto sólido (generalmente semiconductor) frente a los tubos de vacío o de gas como las lámaparas fluorescentes y las bombillas incandescentes.
Light from OLED is coupled into a single mode planar waveguide. The guided light interacts with biological species located inside a microfluidic channel. The detection scheme is based on surface plasmon resonance, which alters the guided light in a wavelength dependent way. The specimen-induced changes in the spectrum of the guided light are monitored by the integrated organic spectrometer