La carta de la tierra y otros códigos éticos mundiales como la declaración de Rio y el protocolo de Montreal establecen principios éticos relacionados con el medio ambiente y el desarrollo sostenible que han sido adoptados por organizaciones internacionales y de la sociedad civil para promover la protección del planeta y regular cuestiones como las sustancias que agotan la capa de ozono y los organismos genéticamente modificados.
El documento resume la evolución del Derecho Ambiental Internacional, incluyendo principios como la soberanía y responsabilidad de los estados, cooperación internacional, acción preventiva y precaución. También describe tratados ambientales importantes como el Convenio de Estocolmo sobre contaminantes orgánicos persistentes. El Derecho Ambiental Internacional se ha desarrollado para regular las relaciones entre actores y proteger el medio ambiente a nivel global.
Declaración de río de janeiro sobre medio ambiente y desarrollo”Ellis18
La Declaración de Río de 1992 estableció principios para el desarrollo sostenible y la protección ambiental. Reconoció la necesidad de equilibrar las necesidades ambientales, sociales y económicas; promovió la cooperación internacional en la lucha contra la pobreza y la contaminación; y estableció principios como el derecho de los países al desarrollo sostenible y la responsabilidad compartida pero diferenciada de los países desarrollados.
DERECHO AMBIENTAL INTERNO E INTERNACIONAL, VIÉNDOLO DESDE UNA ÓPTICA CIVILmiguellugo2020
La ley es una norma dictada por el legislador, es decir, un precepto establecido por la autoridad competente, en que se manda o prohíbe algo en consonancia con la justicia cuyo incumplimiento conlleva a una sanción. Además, es una declaración de la voluntad soberana, que manifestada en la forma prescrita por la Constitución, manda, prohíbe o permite. Es así como se crea la ley general de medio ambiente y recursos naturales, la número 64-00, del 18 de agosto del año 2000, la misma tiene como misión proteger, preservar, controlar el medio ambiente y los recursos naturales y, por ende, sancionar penalmente las conductas relevantes cometidas por los individuos y por las personas jurídicas, cuando estas, comenten ilícitos penales y, por consiguiente, el debido resarcimiento a terceras personas que hayan sufrido un daño en lo civil.
Origen y Evolución del Derecho Ambiental Internacionalrosalbabueno
Este documento resume la evolución histórica del derecho ambiental internacional desde sus primeros antecedentes hasta la actualidad. Comienza describiendo los primeros tratados internacionales sobre el medio ambiente en la antigüedad y continúa explicando las cuatro etapas clave en el desarrollo del derecho ambiental internacional: desde los primeros instrumentos hasta 1972, desde 1972 hasta la Conferencia de Río en 1992, los acuerdos posteriores a Estocolmo 1972, y la Conferencia de Río de 1992.
Leyes, tratados y acuerdos nacionales e internacionales que rigen el cuidado ...Fernando Santiago González
El documento describe los principales tratados y convenios internacionales relacionados con el medio ambiente y la protección del ambiente, incluyendo el Protocolo de Kyoto de 1997 y la Conferencia de Río de 1992. También resume brevemente la legislación ambiental en México.
Este documento resume los principales aspectos del derecho internacional público, incluyendo sus sujetos, fuentes, principios e instrumentos normativos relacionados con el medio ambiente como la biodiversidad, el agua, los residuos y la contaminación. También describe brevemente conceptos clave como los recursos naturales y la clasificación de residuos.
Este extracto de libro describe la evolución del derecho ambiental en Argentina a través de varias etapas: 1) Regulación inicial de recursos naturales, 2) Adopción de tratados internacionales y normativa provincial, 3) Reforma de la Constitución Nacional para incluir protección ambiental, y 4) Sanción de leyes de presupuestos mínimos de protección ambiental a nivel nacional. También discute cómo la gran cantidad de normas ambientales dispersas y contradictorias entre distintos niveles de gobierno llevó a una "contaminación legis
Este documento presenta un seminario sobre derecho y justicia ambiental. Se divide en cinco módulos que cubren la introducción al derecho ambiental, temas selectos como ordenamiento ecológico y áreas naturales protegidas, la relación entre sustentabilidad y desarrollo, la evolución de la justicia ambiental en México, y los derechos humanos y el medio ambiente. El seminario explora conceptos clave como los principios del derecho ambiental establecidos en declaraciones internacionales y la legislación mexicana, y analiza casos ambientales
El documento resume la evolución del Derecho Ambiental Internacional, incluyendo principios como la soberanía y responsabilidad de los estados, cooperación internacional, acción preventiva y precaución. También describe tratados ambientales importantes como el Convenio de Estocolmo sobre contaminantes orgánicos persistentes. El Derecho Ambiental Internacional se ha desarrollado para regular las relaciones entre actores y proteger el medio ambiente a nivel global.
Declaración de río de janeiro sobre medio ambiente y desarrollo”Ellis18
La Declaración de Río de 1992 estableció principios para el desarrollo sostenible y la protección ambiental. Reconoció la necesidad de equilibrar las necesidades ambientales, sociales y económicas; promovió la cooperación internacional en la lucha contra la pobreza y la contaminación; y estableció principios como el derecho de los países al desarrollo sostenible y la responsabilidad compartida pero diferenciada de los países desarrollados.
DERECHO AMBIENTAL INTERNO E INTERNACIONAL, VIÉNDOLO DESDE UNA ÓPTICA CIVILmiguellugo2020
La ley es una norma dictada por el legislador, es decir, un precepto establecido por la autoridad competente, en que se manda o prohíbe algo en consonancia con la justicia cuyo incumplimiento conlleva a una sanción. Además, es una declaración de la voluntad soberana, que manifestada en la forma prescrita por la Constitución, manda, prohíbe o permite. Es así como se crea la ley general de medio ambiente y recursos naturales, la número 64-00, del 18 de agosto del año 2000, la misma tiene como misión proteger, preservar, controlar el medio ambiente y los recursos naturales y, por ende, sancionar penalmente las conductas relevantes cometidas por los individuos y por las personas jurídicas, cuando estas, comenten ilícitos penales y, por consiguiente, el debido resarcimiento a terceras personas que hayan sufrido un daño en lo civil.
Origen y Evolución del Derecho Ambiental Internacionalrosalbabueno
Este documento resume la evolución histórica del derecho ambiental internacional desde sus primeros antecedentes hasta la actualidad. Comienza describiendo los primeros tratados internacionales sobre el medio ambiente en la antigüedad y continúa explicando las cuatro etapas clave en el desarrollo del derecho ambiental internacional: desde los primeros instrumentos hasta 1972, desde 1972 hasta la Conferencia de Río en 1992, los acuerdos posteriores a Estocolmo 1972, y la Conferencia de Río de 1992.
Leyes, tratados y acuerdos nacionales e internacionales que rigen el cuidado ...Fernando Santiago González
El documento describe los principales tratados y convenios internacionales relacionados con el medio ambiente y la protección del ambiente, incluyendo el Protocolo de Kyoto de 1997 y la Conferencia de Río de 1992. También resume brevemente la legislación ambiental en México.
Este documento resume los principales aspectos del derecho internacional público, incluyendo sus sujetos, fuentes, principios e instrumentos normativos relacionados con el medio ambiente como la biodiversidad, el agua, los residuos y la contaminación. También describe brevemente conceptos clave como los recursos naturales y la clasificación de residuos.
Este extracto de libro describe la evolución del derecho ambiental en Argentina a través de varias etapas: 1) Regulación inicial de recursos naturales, 2) Adopción de tratados internacionales y normativa provincial, 3) Reforma de la Constitución Nacional para incluir protección ambiental, y 4) Sanción de leyes de presupuestos mínimos de protección ambiental a nivel nacional. También discute cómo la gran cantidad de normas ambientales dispersas y contradictorias entre distintos niveles de gobierno llevó a una "contaminación legis
Este documento presenta un seminario sobre derecho y justicia ambiental. Se divide en cinco módulos que cubren la introducción al derecho ambiental, temas selectos como ordenamiento ecológico y áreas naturales protegidas, la relación entre sustentabilidad y desarrollo, la evolución de la justicia ambiental en México, y los derechos humanos y el medio ambiente. El seminario explora conceptos clave como los principios del derecho ambiental establecidos en declaraciones internacionales y la legislación mexicana, y analiza casos ambientales
Este documento describe la responsabilidad social y varias ONG ambientales en Colombia, así como tratados y convenios internacionales sobre el medio ambiente. Explica conceptos como educación ambiental y ética ambiental, y ofrece detalles sobre las características y objetivos de diferentes ONG en departamentos como Meta, Arauca, Casanare y otras regiones.
Este documento describe el derecho ambiental en Venezuela. Explica que el derecho ambiental se refiere a las normas que regulan las relaciones públicas y privadas para preservar o mejorar el medio ambiente. También describe los principios del derecho ambiental, su relación con otras ramas del derecho como el derecho administrativo y penal, y los tratados e instrumentos legales internacionales y nacionales relacionados con la protección ambiental en Venezuela.
El documento describe varios convenios y protocolos internacionales relacionados con el medio ambiente y el desarrollo sostenible, incluyendo: la Declaración de Río de 1992, el Protocolo de Kioto de 1997 sobre el cambio climático, el Programa de la UNESCO sobre el Hombre y la Biosfera de 1972, el Convenio de Viena de 1985 para la protección de la capa de ozono, y el Protocolo de Cartagena de 2000 sobre seguridad de la biotecnología. Además, menciona otras conferencias y acuerdos ambientales intern
La Cumbre de la Tierra de Río de Janeiro de 1992 estableció un nuevo paradigma de desarrollo sostenible al reconocer la necesidad de equilibrar el crecimiento económico y la protección ambiental. Los 172 países participantes acordaron la Declaración de Río, que incluye 27 principios como la soberanía de los estados sobre sus recursos y la responsabilidad compartida pero diferenciada de los países. También se establecieron instrumentos internacionales para la biodiversidad y el cambio climático. La cumbre marcó un hit
Este documento resume la evolución del derecho ambiental en Argentina. Explica que el derecho ambiental surgió en la década de 1970 a nivel internacional y se consolidó en la Conferencia de Río de 1992. La Constitución Argentina de 1994 incorporó el derecho a vivir en un ambiente sano y equilibrado, estableciendo deberes para preservarlo. Corresponde a la nación dictar normas mínimas de protección ambiental, y a las provincias complementarlas sin alterar sus jurisdicciones locales.
Este documento resume los principales tipos de tratados internacionales relacionados con la ecología. Explica que los tratados comenzaron a firmarse con mayor frecuencia después de la Segunda Guerra Mundial para abordar problemas ambientales a nivel mundial. Describe los tratados sobre el cambio climático global, el agotamiento de la capa de ozono, el cambio en la cubierta terrestre y la desertificación, y la deforestación. Además, proporciona antecedentes históricos sobre los esfuerzos internacionales para promover la cooperación en
El documento define el desarrollo sostenible como un concepto desarrollado a fines del siglo XX que busca reconciliar el crecimiento económico, los recursos naturales y la sociedad. Explica que se basa en tres pilares: sociedad, economía y medio ambiente. También resume varios acuerdos y tratados internacionales clave relacionados con el medio ambiente y el desarrollo sostenible, incluidos los Objetivos de Desarrollo del Milenio y convenios como el de Cambio Climático y la Convención sobre la D
La Declaración de Río de 1992 estableció 27 principios para lograr el desarrollo sostenible a nivel mundial, incluyendo la participación de todos los países y ciudadanos, la responsabilidad compartida pero diferenciada de los países, y el principio de precaución. También se acordaron dos convenios internacionales y el programa de acción Agenda 21 para aplicar estos principios a nivel local y nacional en áreas como medio ambiente, desarrollo económico y social. La Declaración sentó las bases para futuras cumbres y acuerdos
Este documento resume la Cumbre de la Tierra de 1992 y sus consecuencias. La Cumbre estableció cinco acuerdos globales clave relacionados con el medio ambiente y el desarrollo, y aumentó la conciencia sobre estos temas. También llevó a que muchos países fortalezcan sus instituciones y políticas ambientales, incluyendo a Colombia. Uno de los acuerdos más importantes fue la Convención sobre la Diversidad Biológica, la cual establece principios para la conservación y uso sostenible de los recursos biol
Compromisos internacionales por el medio ambiente CMC ESPAÑAfergarrayo
Estos documentos resumen los principales compromisos internacionales para el medio ambiente desde la Conferencia de Estocolmo de 1972 hasta la Cumbre de Durban de 2011, incluyendo acuerdos como el Protocolo de Kioto, los Objetivos de Desarrollo Sostenible y convenios sobre biodiversidad, cambio climático y especies en peligro. Han buscado preservar el medio ambiente global y fomentar el desarrollo sostenible a través de objetivos, fondos y regulaciones acordados por numerosos países.
El documento trata sobre el derecho ambiental. Explica la definición de medio ambiente sano y los principios básicos del derecho ambiental como el aprovechamiento sustentable de recursos y la protección de generaciones futuras. También analiza la problemática ambiental en América Latina y la tutela constitucional del medio ambiente en Ecuador, incluyendo artículos de la Constitución y el Código Penal ecuatoriano sobre delitos ambientales.
Este documento resume varios compromisos internacionales clave relacionados con el medio ambiente y el desarrollo sostenible, incluido el informe Brundtland de 1987, la Conferencia de Río de 1992, el Club de Roma y su informe Los límites del desarrollo de 1972, y la Conferencia de Estocolmo de 1972. Estos compromisos buscaron establecer acuerdos entre países para abordar problemas ambientales globales como el cambio climático y promover un desarrollo económico que no comprometa los recursos de las
Recientemente tuvo lugar la reunión Río+20. ¿Qué ha pasado en estos 20 años? ¿Cuál es el futuro? ¿Existen alternativas? Se proponen el ECODESARROLLO unido al DECRECIMIENTO.
TRATADOS INTERNACIONALES DEL MEDIO AMBIENTESTONY13
El documento trata sobre la legislación ambiental internacional. Resalta la necesidad de proteger zonas fronterizas ante residuos peligrosos, conservar recursos naturales de interés mundial y fortalecer las legislaciones ambientales nacionales. Menciona que Colombia ha firmado y ratificado aproximadamente 70 tratados y convenios internacionales relacionados con el medio ambiente. La tendencia es hacia un manejo integral de los recursos naturales en términos de problemas y ecosistemas globales.
El documento resume los principales hitos y eventos relacionados con el desarrollo sostenible desde la década de 1980 hasta 2012, incluyendo: 1) la publicación del informe Brundtland en 1987 que acuñó el término "desarrollo sostenible", 2) las cumbres de la Tierra de 1992 y 2002, 3) los Objetivos de Desarrollo del Milenio, y 4) la Cumbre Río+20 de 2012. También analiza conceptos como la economía verde y el marco institucional para el desarrollo sostenible.
El derecho ambiental regula las relaciones públicas y privadas para preservar o mejorar el medio ambiente. Surge del capitalismo y ahora incorpora derechos a la salud y educación. El derecho a un medio ambiente sano considera a las personas como parte de una comunidad capaz de vivir en armonía con la naturaleza. La ONU ha sido pionera en desarrollar tratados para proteger el medio ambiente y reducir contaminantes.
La Conferencia de las Naciones Unidas sobre el Medio Humano de 1972 en Estocolmo buscó sensibilizar a los líderes mundiales sobre los problemas ambientales y establecer políticas para abordarlos. Se discutieron temas como los recursos naturales y la planificación ambiental. Los resultados incluyeron la Declaración de Estocolmo sobre principios ambientales, un Plan de Acción y la creación del Programa de las Naciones Unidas para el Medio Ambiente.
La Conferencia de las Naciones Unidas sobre el Medio Ambiente y el Desarrollo de 1992 en Río de Janeiro reunió a 179 países y estableció el concepto de desarrollo sostenible. Un resultado clave fue el Programa 21, un plan de acción global para promover el desarrollo sostenible que aborda problemas como la contaminación, la pobreza y los patrones insostenibles de producción y consumo.
1) El documento describe la historia y antecedentes de la Ley General del Equilibrio Ecológico y Protección al Medio Ambiente de México, incluyendo sus reformas en 1996. 2) También discute varias conferencias ambientales internacionales como las de Estocolmo y Río, así como sus principales conclusiones y declaraciones. 3) Finalmente, presenta algunas propuestas que México llevó a la Conferencia de Río sobre temas como acción global, desarrollo sustentable y protección de la biodiversidad.
ENJ-200 Derecho Internacional del Medio AmbienteENJ
El documento describe el derecho internacional ambiental como el conjunto de principios y normas jurídicas internacionales cuyo objetivo es proteger el medio ambiente y la biosfera. Explica que este derecho se ha desarrollado a través de tratados internacionales como expresión de la voluntad de los estados. También enumera algunas organizaciones clave involucradas en la protección ambiental a nivel internacional como el Programa de las Naciones Unidas para el Medio Ambiente y convenciones internacionales específicas.
El documento define varios protocolos y declaraciones internacionales relacionadas con la protección del medio ambiente y la promoción del desarrollo sostenible, incluidos el Protocolo de Montreal para proteger la capa de ozono, la Declaración de Río sobre medio ambiente y desarrollo, el Protocolo de Cartagena sobre seguridad de la biotecnología y la Carta de la Tierra que establece un marco ético para lograr un desarrollo sostenible.
El documento discute varios temas relacionados con la responsabilidad ambiental global y los esfuerzos para abordar los problemas ecológicos, incluidos los códigos éticos, los acuerdos internacionales como el Protocolo de Montreal y la Declaración de Río, y el papel de las organizaciones de la sociedad civil.
Este documento describe la responsabilidad social y varias ONG ambientales en Colombia, así como tratados y convenios internacionales sobre el medio ambiente. Explica conceptos como educación ambiental y ética ambiental, y ofrece detalles sobre las características y objetivos de diferentes ONG en departamentos como Meta, Arauca, Casanare y otras regiones.
Este documento describe el derecho ambiental en Venezuela. Explica que el derecho ambiental se refiere a las normas que regulan las relaciones públicas y privadas para preservar o mejorar el medio ambiente. También describe los principios del derecho ambiental, su relación con otras ramas del derecho como el derecho administrativo y penal, y los tratados e instrumentos legales internacionales y nacionales relacionados con la protección ambiental en Venezuela.
El documento describe varios convenios y protocolos internacionales relacionados con el medio ambiente y el desarrollo sostenible, incluyendo: la Declaración de Río de 1992, el Protocolo de Kioto de 1997 sobre el cambio climático, el Programa de la UNESCO sobre el Hombre y la Biosfera de 1972, el Convenio de Viena de 1985 para la protección de la capa de ozono, y el Protocolo de Cartagena de 2000 sobre seguridad de la biotecnología. Además, menciona otras conferencias y acuerdos ambientales intern
La Cumbre de la Tierra de Río de Janeiro de 1992 estableció un nuevo paradigma de desarrollo sostenible al reconocer la necesidad de equilibrar el crecimiento económico y la protección ambiental. Los 172 países participantes acordaron la Declaración de Río, que incluye 27 principios como la soberanía de los estados sobre sus recursos y la responsabilidad compartida pero diferenciada de los países. También se establecieron instrumentos internacionales para la biodiversidad y el cambio climático. La cumbre marcó un hit
Este documento resume la evolución del derecho ambiental en Argentina. Explica que el derecho ambiental surgió en la década de 1970 a nivel internacional y se consolidó en la Conferencia de Río de 1992. La Constitución Argentina de 1994 incorporó el derecho a vivir en un ambiente sano y equilibrado, estableciendo deberes para preservarlo. Corresponde a la nación dictar normas mínimas de protección ambiental, y a las provincias complementarlas sin alterar sus jurisdicciones locales.
Este documento resume los principales tipos de tratados internacionales relacionados con la ecología. Explica que los tratados comenzaron a firmarse con mayor frecuencia después de la Segunda Guerra Mundial para abordar problemas ambientales a nivel mundial. Describe los tratados sobre el cambio climático global, el agotamiento de la capa de ozono, el cambio en la cubierta terrestre y la desertificación, y la deforestación. Además, proporciona antecedentes históricos sobre los esfuerzos internacionales para promover la cooperación en
El documento define el desarrollo sostenible como un concepto desarrollado a fines del siglo XX que busca reconciliar el crecimiento económico, los recursos naturales y la sociedad. Explica que se basa en tres pilares: sociedad, economía y medio ambiente. También resume varios acuerdos y tratados internacionales clave relacionados con el medio ambiente y el desarrollo sostenible, incluidos los Objetivos de Desarrollo del Milenio y convenios como el de Cambio Climático y la Convención sobre la D
La Declaración de Río de 1992 estableció 27 principios para lograr el desarrollo sostenible a nivel mundial, incluyendo la participación de todos los países y ciudadanos, la responsabilidad compartida pero diferenciada de los países, y el principio de precaución. También se acordaron dos convenios internacionales y el programa de acción Agenda 21 para aplicar estos principios a nivel local y nacional en áreas como medio ambiente, desarrollo económico y social. La Declaración sentó las bases para futuras cumbres y acuerdos
Este documento resume la Cumbre de la Tierra de 1992 y sus consecuencias. La Cumbre estableció cinco acuerdos globales clave relacionados con el medio ambiente y el desarrollo, y aumentó la conciencia sobre estos temas. También llevó a que muchos países fortalezcan sus instituciones y políticas ambientales, incluyendo a Colombia. Uno de los acuerdos más importantes fue la Convención sobre la Diversidad Biológica, la cual establece principios para la conservación y uso sostenible de los recursos biol
Compromisos internacionales por el medio ambiente CMC ESPAÑAfergarrayo
Estos documentos resumen los principales compromisos internacionales para el medio ambiente desde la Conferencia de Estocolmo de 1972 hasta la Cumbre de Durban de 2011, incluyendo acuerdos como el Protocolo de Kioto, los Objetivos de Desarrollo Sostenible y convenios sobre biodiversidad, cambio climático y especies en peligro. Han buscado preservar el medio ambiente global y fomentar el desarrollo sostenible a través de objetivos, fondos y regulaciones acordados por numerosos países.
El documento trata sobre el derecho ambiental. Explica la definición de medio ambiente sano y los principios básicos del derecho ambiental como el aprovechamiento sustentable de recursos y la protección de generaciones futuras. También analiza la problemática ambiental en América Latina y la tutela constitucional del medio ambiente en Ecuador, incluyendo artículos de la Constitución y el Código Penal ecuatoriano sobre delitos ambientales.
Este documento resume varios compromisos internacionales clave relacionados con el medio ambiente y el desarrollo sostenible, incluido el informe Brundtland de 1987, la Conferencia de Río de 1992, el Club de Roma y su informe Los límites del desarrollo de 1972, y la Conferencia de Estocolmo de 1972. Estos compromisos buscaron establecer acuerdos entre países para abordar problemas ambientales globales como el cambio climático y promover un desarrollo económico que no comprometa los recursos de las
Recientemente tuvo lugar la reunión Río+20. ¿Qué ha pasado en estos 20 años? ¿Cuál es el futuro? ¿Existen alternativas? Se proponen el ECODESARROLLO unido al DECRECIMIENTO.
TRATADOS INTERNACIONALES DEL MEDIO AMBIENTESTONY13
El documento trata sobre la legislación ambiental internacional. Resalta la necesidad de proteger zonas fronterizas ante residuos peligrosos, conservar recursos naturales de interés mundial y fortalecer las legislaciones ambientales nacionales. Menciona que Colombia ha firmado y ratificado aproximadamente 70 tratados y convenios internacionales relacionados con el medio ambiente. La tendencia es hacia un manejo integral de los recursos naturales en términos de problemas y ecosistemas globales.
El documento resume los principales hitos y eventos relacionados con el desarrollo sostenible desde la década de 1980 hasta 2012, incluyendo: 1) la publicación del informe Brundtland en 1987 que acuñó el término "desarrollo sostenible", 2) las cumbres de la Tierra de 1992 y 2002, 3) los Objetivos de Desarrollo del Milenio, y 4) la Cumbre Río+20 de 2012. También analiza conceptos como la economía verde y el marco institucional para el desarrollo sostenible.
El derecho ambiental regula las relaciones públicas y privadas para preservar o mejorar el medio ambiente. Surge del capitalismo y ahora incorpora derechos a la salud y educación. El derecho a un medio ambiente sano considera a las personas como parte de una comunidad capaz de vivir en armonía con la naturaleza. La ONU ha sido pionera en desarrollar tratados para proteger el medio ambiente y reducir contaminantes.
La Conferencia de las Naciones Unidas sobre el Medio Humano de 1972 en Estocolmo buscó sensibilizar a los líderes mundiales sobre los problemas ambientales y establecer políticas para abordarlos. Se discutieron temas como los recursos naturales y la planificación ambiental. Los resultados incluyeron la Declaración de Estocolmo sobre principios ambientales, un Plan de Acción y la creación del Programa de las Naciones Unidas para el Medio Ambiente.
La Conferencia de las Naciones Unidas sobre el Medio Ambiente y el Desarrollo de 1992 en Río de Janeiro reunió a 179 países y estableció el concepto de desarrollo sostenible. Un resultado clave fue el Programa 21, un plan de acción global para promover el desarrollo sostenible que aborda problemas como la contaminación, la pobreza y los patrones insostenibles de producción y consumo.
1) El documento describe la historia y antecedentes de la Ley General del Equilibrio Ecológico y Protección al Medio Ambiente de México, incluyendo sus reformas en 1996. 2) También discute varias conferencias ambientales internacionales como las de Estocolmo y Río, así como sus principales conclusiones y declaraciones. 3) Finalmente, presenta algunas propuestas que México llevó a la Conferencia de Río sobre temas como acción global, desarrollo sustentable y protección de la biodiversidad.
ENJ-200 Derecho Internacional del Medio AmbienteENJ
El documento describe el derecho internacional ambiental como el conjunto de principios y normas jurídicas internacionales cuyo objetivo es proteger el medio ambiente y la biosfera. Explica que este derecho se ha desarrollado a través de tratados internacionales como expresión de la voluntad de los estados. También enumera algunas organizaciones clave involucradas en la protección ambiental a nivel internacional como el Programa de las Naciones Unidas para el Medio Ambiente y convenciones internacionales específicas.
El documento define varios protocolos y declaraciones internacionales relacionadas con la protección del medio ambiente y la promoción del desarrollo sostenible, incluidos el Protocolo de Montreal para proteger la capa de ozono, la Declaración de Río sobre medio ambiente y desarrollo, el Protocolo de Cartagena sobre seguridad de la biotecnología y la Carta de la Tierra que establece un marco ético para lograr un desarrollo sostenible.
El documento discute varios temas relacionados con la responsabilidad ambiental global y los esfuerzos para abordar los problemas ecológicos, incluidos los códigos éticos, los acuerdos internacionales como el Protocolo de Montreal y la Declaración de Río, y el papel de las organizaciones de la sociedad civil.
Este documento presenta resúmenes de varios códigos y protocolos éticos ambientales internacionales. El Protocolo de Montreal busca reducir sustancias que dañan la capa de ozono. El Protocolo de Cartagena regula los riesgos de los organismos modificados. La Declaración de Río estableció principios como el derecho a un ambiente saludable y la responsabilidad compartida pero diferenciada de los países para el desarrollo sostenible.
Clase 01 marco legal para la gestion ambiental - internacionalMIKYRoll
El documento presenta un resumen del marco legal internacional para la gestión ambiental. Explica los principales instrumentos y convenios internacionales relacionados con el medio ambiente, incluyendo la Declaración de Estocolmo de 1972, el Protocolo de Kioto, el Convenio sobre Diversidad Biológica y el Convenio Marco de las Naciones Unidas sobre el Cambio Climático, entre otros. También describe los principios fundamentales del derecho ambiental internacional como la soberanía estatal, la no interferencia y la cooperación entre países.
DERECHO AMBIENTAL INTERNO E INTERNACIONAL, VIÉNDOLO DESDE UNA ÓPTICA CIVIL miguellugo2020
El documento habla sobre el derecho ambiental y su evolución. Explica que el derecho ambiental surgió para proteger el medio ambiente ante los efectos del desarrollo industrial. Detalla hitos como la Declaración de Estocolmo de 1972, que estableció principios clave, y la Cumbre de Río de 1992, que reconoció la relación entre medio ambiente y desarrollo. Finalmente, resume las características y principios fundamentales del derecho ambiental internacional.
LA IMPLEMENTACION DE PROTOCOLOS CON EL MEDIO AMBIENTE.pptxFlorMachcoChamaya
Este documento describe varios protocolos ambientales internacionales establecidos para abordar problemas ambientales como el cambio climático, la contaminación atmosférica y la protección de la capa de ozono. Algunos de los protocolos discutidos incluyen el Protocolo de Kioto, el Protocolo de Montreal y el Protocolo de Cartagena sobre bioseguridad. Los protocolos buscan regular las emisiones de gases de efecto invernadero y sustancias dañinas para establecer acuerdos para la protección del medio ambiente global.
El documento describe brevemente la historia del desarrollo sustentable desde la postguerra hasta la actualidad. Se destacan hitos como la Conferencia de Estocolmo en 1972, el Informe Brundtland de 1987 y la Conferencia de Río en 1992, donde se definieron conceptos clave y se impulsaron acciones a nivel global. También se explica que en México se ha afectado el medio ambiente debido al desarrollo económico y existe legislación ambiental para regular el uso de los recursos naturales y proteger el equilibrio ecológico
El documento describe la evolución del derecho ambiental internacional a través de varias etapas, desde normas enfocadas en el uso de recursos hasta normas que protegen ecosistemas globales. Explica principios clave como soberanía y responsabilidad, acción preventiva, precaución y desarrollo sostenible. También analiza varios tratados ambientales multilaterales importantes y sus objetivos de proteger la salud y el medio ambiente.
Este documento describe varios códigos éticos ambientales internacionales importantes. El Protocolo de Montreal, firmado en 1987, busca reducir la producción de sustancias que dañan la capa de ozono para recuperarla para 2050. El Protocolo de Cartagena, en vigor desde 2003, regula el movimiento transfronterizo de organismos genéticamente modificados. La Declaración de Río de 1992 estableció principios como el derecho a una vida en armonía con la naturaleza y la erradicación de la pobreza para lograr el des
Este documento presenta una introducción al derecho ambiental, definiendo conceptos clave como medio ambiente y derecho ambiental. Explica la evolución de esta disciplina a través de importantes conferencias y acuerdos internacionales desde la década de 1970, incluidas las Declaraciones de Estocolmo, Río de Janeiro, Johannesburgo y los Objetivos de Desarrollo Sostenible. También describe los principios generales del derecho ambiental como la cooperación, prevención, desarrollo sostenible, precaución, "quien contamina paga
Este documento resume varios acuerdos y reuniones internacionales sobre desarrollo sostenible y cambio climático. Detalla la Cumbre de la Tierra de 1992 donde se adoptó la Convención Marco de las Naciones Unidas sobre el Cambio Climático y la Agenda 21. También explica la Carta de la Tierra de 2000, un documento que promueve la protección ambiental, derechos humanos y paz. Finalmente, analiza el Protocolo de Kyoto de 1997 donde países se comprometieron a reducir emisiones, aunque la mayoría no cumpl
Este documento presenta un informe sobre la implementación de protocolos ambientales. Brevemente describe algunos de los protocolos más importantes como el Protocolo de Montreal sobre sustancias que agotan la capa de ozono, el Protocolo de Kioto sobre el cambio climático y el Protocolo de Cartagena sobre bioseguridad. Además, ofrece consejos generales para cuidar el medio ambiente como usar servilletas reutilizables, aprovechar la luz natural y plantar árboles.
Este documento presenta información sobre la normativa ambiental internacional y peruana. Brevemente:
1) Describe varios tratados internacionales sobre el clima y la diversidad biológica ratificados por Perú.
2) Explica principios de la Declaración de Río sobre Medio Ambiente y Desarrollo de 1992.
3) Resume algunos aspectos clave de la legislación ambiental peruana como la Ley General del Ambiente de 2005.
La organización de las Naciones Unidas celebró en diciembre de 2010 en Cancún, México una cumbre sobre el cambio climático donde se alcanzaron acuerdos importantes. El desarrollo sustentable permite satisfacer las necesidades del presente sin comprometer las de futuras generaciones dado los límites impuestos por la tecnología y organización social. La Carta de la Tierra presenta principios como el respeto a la vida, la integridad ecológica, la justicia social y económica, y la democracia para guiar una vida
La primera conferencia global sobre el medio ambiente se realizó en Estocolmo en 1972 y trató temas como la declaración sobre el medio ambiente humano y el plan de acción. Posteriormente, en 1992 se realizó la Cumbre de la Tierra en Río de Janeiro, donde se adoptó la Agenda 21 y otros documentos importantes. Finalmente, México participó en la cumbre con propuestas en cuatro áreas clave: cambio climático, diversidad biológica, desarrollo sustentable y salud.
Este documento presenta una introducción al marco normativo y políticas ambientales en el Perú. Resume la legislación ambiental peruana e internacional, los principios de la política ambiental nacional, y las instituciones clave como el Ministerio del Ambiente y el Consejo Nacional del Ambiente. También discute desafíos como la falta de coordinación entre las leyes ambientales y de inversión, y la necesidad de fortalecer la aplicación y cumplimiento de las normas ambientales.
El documento presenta una introducción al tema del medio ambiente en Perú, discutiendo la normatividad ambiental a nivel internacional y nacional. Cubre tratados internacionales sobre el clima y la diversidad biológica, la legislación peruana sobre el medio ambiente incluyendo la Constitución y la Ley General del Ambiente, y los principios de la política nacional del ambiente en Perú. También identifica algunos desafíos en el marco normativo ambiental relacionados a su aplicación efectiva y la falta de sanciones adecuadas.
Este documento presenta una introducción al marco normativo y políticas ambientales en el Perú. Resume la legislación ambiental peruana e internacional, los principios de la política ambiental nacional, y las instituciones clave como el Ministerio del Ambiente y el Consejo Nacional del Ambiente. También discute desafíos como la falta de coordinación entre las leyes ambientales y de inversión, y la necesidad de fortalecer la aplicación y cumplimiento de las normas ambientales.
Este documento trata sobre la legislación ambiental nicaragüense y los convenios internacionales ratificados por Nicaragua. Explica la evolución del derecho ambiental internacional y nicaragüense, incluyendo la Constitución, la Ley Ambiental 641 y los delitos penales ambientales. También resume los principales instrumentos internacionales como la Declaración de Estocolmo, la Declaración de Río y los Objetivos de Desarrollo Sostenible. Finalmente, analiza la relación entre el derecho público, privado y otras disciplinas en materia ambient
La Declaración de Estocolmo de 1972 fue el resultado de la primera Conferencia de las Naciones Unidas sobre el Medio Ambiente Humano. Estableció 106 recomendaciones y 24 principios para promover el desarrollo sostenible y la protección ambiental. También llevó a la creación del Programa de las Naciones Unidas para el Medio Ambiente.
El documento describe los volcanes de México. México tiene una variedad de volcanes, tanto antiguos como jóvenes, grandes y pequeños. Algunos volcanes mexicanos aún están activos, como el Colima, mientras que otros están inactivos o son intermitentes, con períodos de actividad y descanso. Los volcanes juegan un papel importante en la geología y cultura de México.
El documento lista los nombres de 10 estudiantes que forman parte del Equipo 1: Omar Alvarez, Victoria Alvarez, Itzel Antolino, Anairis Armenta, Tynischa Blanco, Iker Briones, Laura Bustamante, Ruth Cabrera, Christopher Calderón y Wences Carbajal.
Las células musculares se encargan de la contracción y relajación permitiendo el movimiento en animales y humanos. Están unidos a los huesos del esqueleto y forman la mayor parte de la masa corporal. Cada célula muscular tiene varios núcleos y se desliza sobre otra al contraerse, controlando tanto los movimientos voluntarios como involuntarios.
Un diagnóstico temprano y tratamiento integral en clínicas especializadas pueden mejorar la supervivencia y calidad de vida de los pacientes con fibrosis quística. El tratamiento incluye antibióticos, medicamentos inhalados, terapias para diluir el moco, suplementos vitamínicos, ejercicio y vigilancia en el hogar para mantener las vías respiratorias despejadas.
La donación de órganos involucra la remoción de órganos o tejidos de personas fallecidas o donantes vivos con el fin de realizar trasplantes. Aunque la mayoría de países tienen sistemas legales que supervisan los trasplantes, la demanda supera ampliamente la oferta, lo que ha dado lugar a un mercado negro de trasplantes. Existen debates éticos sobre el equilibrio entre quienes donan órganos, usualmente personas pobres, y quienes pueden pagar por ellos en el mercado negro.
Este documento describe el software educativo y sus componentes. Explica que el software educativo refuerza la enseñanza y el aprendizaje a través de aplicaciones interactivas. Luego discute componentes clave como Internet, grupos de noticias, educación en línea, páginas web, portales y buscadores. Concluye que estos componentes son esenciales para acceder a recursos educativos en línea y que el software educativo permite no solo aprender sino también interactuar y comunicarse.
El documento presenta información sobre tres grupos indígenas del centro-norte de México: los nonoalcas, los toltecas-chichimecas y otro grupo sin nombre. Para cada grupo, ofrece detalles sobre su ubicación geográfica, economía, rasgos culturales y organización social y política.
This document discusses separable verbs in English. It provides examples of common separable verbs like "clean up", "hang up", and "turn off". These are phrasal verbs that can be separated by nouns or pronouns, such as "turn the TV down" or "pick them up". More separable verbs and their meanings are listed, such as "bring up" to mention a topic, "fill in" to add information, and "look up" to find in a reference. The document aims to explain what separable verbs are and provide examples of their use.
This short document provides examples of separable verbs in German but does not list any actual examples. It asks if the reader wants more separable verb examples and indicates that a few more will be provided.
Este documento contiene información sobre tres temas principales: 1) Los riesgos a los que están expuestos los sistemas de información, como incendios, errores de software, fallas eléctricas, etc. 2) Formas de respaldar información, como usar discos duros externos, carpetas web, y 3) Recuperación de información a través de bases de datos, búsquedas en internet y herramientas como tesauros y ontologías. También incluye estadísticas sobre los principales riesgos para los sistemas de inform
El documento describe las características anatómicas y de desarrollo de los anélidos. Los anélidos tienen tres capas corporales principales (ectodermo, endodermo y mesodermo) y un sistema circulatorio cerrado donde la sangre es bombeada a través de venas por los músculos del corazón. Los anélidos pueden ser de sexos separados o hermafroditas, y su desarrollo puede ser directo con la progenie parecida a un adulto pequeño o indirecto con una etapa larvaria que no se parece al adulto.
El documento describe cómo en la década de 1780 la monarquía francesa enfrentaba dificultades debido al surgimiento del pensamiento ilustrado, que permitió una mayor aceptación social de los campesinos, artesanos y sectores pobres. La libertad se había convertido en un valor muy anhelado. Cuando se convocó a los Estados Generales en 1789, un grupo de liberales parisinos exigió que se duplicara la representación del Tercer Estado, lo que generó gran controversia.
La psicología se originó como el estudio filosófico del alma pero ahora se considera una ciencia que estudia procesos mentales como la inteligencia y el aprendizaje. Surge como disciplina independiente en el siglo 19 cuando Wilhelm Wundt establece el primer laboratorio de psicología experimental en Alemania. Ahora existen diversas escuelas de psicología que intentan explicar el comportamiento humano desde diferentes perspectivas científicas.
Este documento describe la historia del fútbol. Comenzó a desarrollarse en Inglaterra a finales de la Edad Media como diferentes juegos de pelota y se unificó en 1863 con la formación de la Asociación de Fútbol de Inglaterra, cuyas reglas son la base del deporte moderno. El fútbol se ha convertido en el deporte más popular del mundo y es administrado a nivel internacional por la FIFA.
This document provides instructions for removing reproduction instructions from PowerPoint slide notes to improve performance if slides are running slowly. It also explains how to print the instructions by copying text from the slide notes into a Microsoft Word document and printing from there. The reproduction steps for each slide are included in the slide notes for reference.
If you notice delays or decreased performance in slide effects, you may want to remove the reproduction instructions in the Slide Notes. To do so, place your cursor in the Slide Notes and press CTRL + A followed by DELETE. Alternatively, you can print the instructions for a specific slide by selecting the slide, copying the text in the Slide Notes, pasting it into a Word document, and printing from there. The document contains examples of formatting and layouts for PowerPoint slides, along with reproduction instructions in the Slide Notes for each slide.
If you notice delays or decreased performance in slide effects, you may want to remove the reproduction instructions in the Slide Notes. To do so, place your cursor in the Slide Notes and press CTRL + A followed by DELETE. Alternatively, you can print the instructions for a specific slide by selecting the slide, copying the text in the Slide Notes, pasting it into a Word document, and printing from there. The document contains examples of formatting and layouts for PowerPoint slides, along with reproduction instructions in the Slide Notes for each slide.
This document provides instructions for printing reproduction instructions from PowerPoint slides. It explains how to select a slide, copy the slide notes, paste them into a Word document, and then print the Word document. It also describes how to remove reproduction instructions from slide notes by selecting and deleting the text.
Los primeros días de prácticas del autor fueron emocionantes mientras conocía el hotel y a su equipo. Aprendió sobre inventarios y administración en la oficina de alimentos y bebidas. Durante las siguientes semanas, el autor pasó tiempo aprendiendo sobre bebidas en el bar de la alberca y ayudando en otros bares y restaurantes del hotel.
2. Por tanto,
código ético
ambiental es el
conjunto de
normas o
reglas de
carácter ético
aplicables en
materia
ambiental.
Entonces
código ético
se refiere al
cuerpo o
conjunto de
normas o
reglas de
caracter ético
aplicables.
Si código son
normas, leyes
o reglas
aplicables y
dispuestas
de manera
sistemática.
¿CÓDIGO?
1 ¿CÓDIGO
ÉTICO?
2 ¿AMBIENTAL?
3
¿QUÉ SABES DE CADA UNO?
3. Pese a haber estas leyes, NO
precisamente resultan ser un código ético
ambiental
4. La ética ambiental
La Declaración Universal de
los Derechos Humanos
Contenidas en un sin número de documentos legales,
sociológicos, ecológicos, etc.
Todos universales que, de manera virtual, conforman ese código ético ambiental
Carta de la Tierra
De diversas disposiciones Axiológicas
Se conforma
Artículos como:
5. Hablar de códigos éticos ambientales es hablar de
valores morales que definen hacia dónde va la conducta
humana, en este caso, hacia la ejecución de acciones
positivas ante el entorno cultural.
Milton Rokeach afirma que existen 2 tipos de valores:
1. LOS INSTRUMENTALES: Mediante los cuales las
personas demuestran su preferencia por determinadas
formas de conducta
2. LOS TERMINALES: Hacen referencia a la
orientación de las personas hacia modos ideales de
vida
EXPLICADOS EN LA SIG. FÓRMULA
Valores instrumentales-Formas de conducta
Valores terminales-Modos ideales de vida
6. Valoresinstrumentales Valoresterminales
•Amor a las personas y a la tierra •Un mundo en paz
•Generosidad •Seguridad nacional
•Compartir •Seguridad familiar
•Honradez •Libertad para todas las personas
•Comportamiento ecológicamente
positivo
•Igualdad
•Responsabilidad •Fraternidad
•Autoreflexión •Fuerza moral
•Empatía e interés por otras
culturas
•Respeto a si mismo, amor maduro
•Perdón •Equilibrio interior
•Verdadera amistad •Sabiduría
•Alegría •Un mundo lleno de belleza
•Ser de ayuda a los demás •Apoyo a la comunidad
•Cortesía, Tolerancia •Un ecosistema en equilibrio total
(En el que la acción del hombre
favorezca el desarrollo ecológico de
la tierra a largo plazo)
•Amabilidad •Un orden mundial igualitario
•Sacrificio
•Autodisciplina
•Educación
7. 1. Protocolo de Montreal
2. La declaración de Rio
3. El protocolo de Cartagena
8.
9. El Protocolo de Montreal relativo a las sustancias que agotan el
ozono[1] es un tratado internacional diseñado para proteger la
capa de ozono reduciendo la producción y el consumo de
numerosas sustancias que se ha estudiado que reaccionan con el
ozono y se cree que son responsables por el agotamiento de la capa
de ozono. El acuerdo fue negociado en 1987 y entró en vigor el 1º
de enero de 1989. La primera reunión de las partes se celebró en
Helsinki en mayo de ese 1989. Desde ese momento, el documento
ha sido revisado en varias ocasiones, en 1990 (Londres), en 1991
(Nairobi), en 1992 (Copenhague), en 1993 (Bangkok), en 1995
(Viena), en 1997 (Montreal) y en 1999 (Beijing). Se cree que si
todos los países cumplen con los objetivos propuestos dentro del
tratado, la capa de ozono podría haberse recuperado para el año
2050. Debido al alto grado de aceptación e implementación que se
ha logrado, el tratado ha sido considerado como un ejemplo
excepcional de cooperación internacional.
10. Esta Declaración fue adoptada por los gobiernos participantes en la Cumbre de
las Naciones Unidas para el Medio Ambiente y el Desarrollo, celebrada en la
ciudad de Río de Janeiro, Brasil, en junio de 1992.
La Conferencia de las Naciones Unidas sobre el Medio Ambiente y el
Desarrollo,
Habiéndose reunido en Río de Janeiro del 3 al 14 de junio de 1992,
Reafirmando la Declaración de la Conferencia de las Naciones Unidas sobre el
Medio Humano, aprobada en Estocolmo el 16 de junio de 1972, y tratando de
basarse en ella,
Con el objetivo de establecer una alianza mundial nueva y equitativa
mediante la creación de nuevos niveles de cooperación entre los Estados, los
sectores claves de las sociedades y las personas,
Procurando alcanzar acuerdos internacionales en los que se respeten los
intereses de todos y se proteja la integridad del sistema ambiental y de
desarrollo mundial,
Reconociendo la naturaleza integral e interdependiente de la Tierra, nuestro
hogar,
Proclama que:
11. PRINCIPIO 1
Los seres humanos constituyen el centro de las preocupaciones relacionadas con el
desarrollo sostenible. Tienen derecho a una vida saludable y productiva en armonía con
la naturaleza.
PRINCIPIO 2
De conformidad con la Carta de las Naciones Unidas y los principios del derecho
internacional, los Estados tienen el derecho soberano de aprovechar sus propios
recursos según sus propias políticas ambientales y de desarrollo, y la responsabilidad de
velar por que las actividades realizadas dentro de su jurisdicción o bajo su control no
causen daños al medio ambiente de otros Estados o de zonas que estén fuera de los
límites de la jurisdicción nacional.
PRINCIPIO 3
El derecho al desarrollo debe ejercerse en forma tal que responda equitativamente a
las necesidades de desarrollo y ambientales de las generaciones presentes y futuras.
PRINCIPIO 4
A fin de alcanzar el desarrollo sostenible, la protección del medio ambiente deberá
constituir parte integrante del proceso de desarrollo y no podrá considerarse en forma
aislada.
PRINCIPIO 5
Todos los Estados y todas las personas deberán cooperar en la tarea esencial de
erradicar la pobreza como requisito indispensable del desarrollo sostenible, a fin de
reducir las disparidades en los niveles de vida y responder mejor a las necesidades de
la mayoría de los pueblos del mundo. ETC.
12. El Protocolo de Cartagena, que en vigor el 11 de septiembre del 2003, fue el primer
acuerdo internacional que establece la transferencia, manejo y uso de
organismos vivos modificados a través de la biotecnología moderna, es decir,
regula los riesgos que implican los organismos transgénicos.
La finalidad del Protocolo de Cartagena es descartar potenciales conflictos entre
las leyes de comercio y el régimen de bioseguridad global.
México forma parte de dicho protocolo junto con otros 151 países miembros y tiene
como objetivo regular el movimiento transfronterizo de Organismos
Genéticamente Modificados (OGM).
Desafortunadamente, no ha habido un avance sustancial en materia de
bioseguridad: La siembra de transgénicos es ilegal en México, en base a la Ley de
Bioseguridad de Organismos Genéticamente Modificados (LBOGM) que está vigente.
Otros de los puntos de dicho acuerdo esta en definir el régimen de responsabilidad
y compensación.
Uno de los obstáculos es que las compañías de biotecnología no están dispuestas
a ceder y a verse sometidas a un régimen de responsabilidad, para proteger a
quienes sean afectados por los OGM´s. Como pasa en muchas cosas en México,
nadie se quiere hacer responsable de sus actos.
13. La carta de la tierra y otros
códigos éticos mundiales
14.
15. La carta de la tierra es un documento que
concentra una serie de valores, principios
éticos y aspiraciones de millones de hombres
y mujeres de todas las regiones del mundo,
independiente de su raza, credo, condición
política, etc.
16. • Fue en el año 1987 cuando la Comisión
Mundial sobre Ambiente y Desarrollo
(CMAD),en ese entonces dirigida por el señor
Gro Harlem Bruntland, hizo un llamado para
la elaboración de un documento cimentado
en cuatro principios fundamentales para el
desarrollo sustentable y al cual se le
denomino Carta ala tierra.
17. • Primero: Respeto y cuidado de la comunidad de la
vida
• 1.respetar la vida en toda su diversidad.
• 2.cuidar la comunidad de la vida con
entendimiento, compasión y amor
• 3.construir sociedades democráticas que sean
justas, participativas, sostenibles y pacificas.
• 4.asegurar que los frutos y la belleza de la tierra
se preserven para las generaciones presentes y
futuras
18. • Segundo: Integridad ecológica
• 5.Proteger y restaurar la integridad de los sistemas
ecológicos de la tierra, con especial por la diversidad
biológica y los procesos naturales que sustentan la vida.
• 6.evitar dañar como el mejor método de protección
ambiental y cuando el conocimiento sea limitado, proceder
con precaución.
• 7.adoptar patrones de producción, consumo y reproducción
que salvaguarden las capacidades regenerativas de la tierra,
los derechos humanos y el bienestar comunitario.
• 8.impulsar el estudio de la sostenibilidad ecológica y
promover el intercambio abierto y la extensa aplicación del
conocimiento adquirido.
19.
20. Códigos éticos establecidos por OrganizacionesAmbientalistas de la SociedadCivil
Educación contra contaminación
Impugnación de la contaminación
Concierto de protestas
Concienciación ciudadana a favor de el futuro de la
humanidad
Impedimento a la continuación de actos bárbaros
Custom animation effects: video wall reveal picture(Basic)Tip: For best results when reproducing the picture effects on this slide, you may want to use the Snap objects to grid feature. To do so, right-click the slide background and select Grid and Guides. Under Snap to, select Snap objects to grid.To reproduce the background on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. Right-click the slide background area, and then click Format Background.In the Format Background dialog box, in the left pane, select Fill, and then do the following in the Fill pane: Select Picture or texture fill.Under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.To reproduce the first row of squares with animation effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option on the left). On the slide, drag to draw the rectangle.Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, do the following to change it into a square:In the Shape Height box, enter 2.5”.In the Shape Width box, enter 2.5”.Under DrawingTools, on the Format tab, in the Shape Styles group, do the following:Click the arrow next to Shape Fill, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Click the arrow next to Shape Outline, and then click No Outline.Select the square. On the Home tab, in the Clipboard group, click the arrow underPaste, and then click Duplicate. Repeat this process two more times for a total of four squares.Press and hold CTRL, and then select all four squares.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Top.Click Distribute Horizontally.Press and hold CTRL, and then select all four squares. On the Animations tab, in the Animations group, click CustomAnimation, and then do the following in the Custom Animation task pane:Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Subtle, click Fade, and then click OK.Under Modify: Fade, in the Start list, select With Previous. Under Modify: Fade, in the Speed list, select Very Fast. Also in the CustomAnimation task pane, do the following:Select the first animation effect. Click the arrow to the right of the first animation effect (fade effect for the first square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0, and then click OK.Select the second animation effect. Click the arrow to the right of the second animation effect (fade effect for the second square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.1, and then click OK.Select the third animation effect. Click the arrow to the right of the third animation effect (fade effect for the third square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK.Select the fourth animation effect. Click the arrow to the right of the fourth animation effect (fade effect for the fourth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.3, and then click OK.To reproduce the second row of squares with animation effects on this slide, do the following:On the slide, select one of the squares in the first row.On the Home tab, in the Clipboard group, click the arrow under Paste, click Duplicate, and then drag the duplicate square away from the first row of squares. Repeat this process two more times for a total of four new squares (a total of eight squares on the slide).On the Home tab, in the Editing group, click Select, and then click SelectionPane. Press and hold CTRL, and then in the Selection and Visibility pane, select the fifth, sixth, seventh, and eighth objects (four new squares). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Middle.Click Distribute Horizontally.In the Custom Animationtask pane, select the fifth, sixth, seventh, and eighth animation effects (fade effects for the second row of squares), and then do the following:Under Modify: Fade, in the Start list, select With Previous. Under Modify: Fade, in the Speed list, select Very Fast. Also in the CustomAnimation task pane, do the following:Select the fifth animation effect. Click the arrow to the right of the fifth animation effect (fade effect for the fifth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK.Select the sixth animation effect. Click the arrow to the right of the sixth animation effect (fade effect for the sixth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5, and then click OK.Select the seventh animation effect. Click the arrow to the right of the seventh animation effect (fade effect for the seventh square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK.Select the eighth animation effect. Click the arrow to the right of the eighth animation effect (fade effect for the eighth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.7, and then click OK.To reproduce the third row of squares with animation effects on this slide, do the following:On the slide, select one of the squares in the second row.On the Home tab, in the Clipboard group, click the arrow under Paste, click Duplicate, and then drag the duplicate square away from the second row of squares. Repeat this process two more times for a total of four new squares (a total of 12 squares on the slide).Press and hold CTRL, and then in the Selection and Visibility pane, select the ninth, 10th, 11th, and 12thobjects (four new squares). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Bottom.Click Distribute Horizontally.In the Custom Animationtask pane, select the ninth, 10th, 11th, and 12thanimation effects (fade effects for the third row of squares), and then do the following:Under Modify: Fade, in the Start list, select With Previous. Under Modify: Fade, in the Speed list, select Very Fast. Also in the CustomAnimation task pane, do the following:Select the ninth animation effect. Click the arrow to the right of the ninth animation effect (fade effect for the ninth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK.Select the 10th animation effect. Click the arrow to the right of the 10th animation effect (fade effect for the 10th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.9, and then click OK.Select the 11th animation effect. Click the arrow to the right of the 11th animation effect (fade effect for the 11th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 1, and then click OK.Select the 12th animation effect. Click the arrow to the right of the 12th animation effect (fade effect for the 12th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 1.1, and then click OK.
For reproduction steps for this slide, refer to the PowerPoint template titled “Combined picture and text effects for PowerPoint slides” (ANI_TEXT.potx), slide number 8.
Custom animation effects: Grayscale picture fades to full color(Basic)To reproduce the grayscale picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click Picture.In the Insert Picture dialog box, select a color picture and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.15” and the Width box is set to 6.25”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Under PictureTools, on the Format tab, in the Adjust group, click Recolor, and then under Color Modes click Grayscale (first option from the left).Right-click the grayscale picture, and then click Format Picture. In the Format Picture dialog box, in the left pane, click Shadow. In the Shadow pane, click the button next to Presets, and then under Outer click Offset Diagonal Top Right (third row, first option on the left).On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the full-color picture effects on this slide, do the following:Select the grayscale picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.Select the duplicate picture. Under PictureTools, on the Format tab, in the Adjust group, click Recolor, and then under No Recolor click No Recolor.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the full-color picture, and then do the following in the CustomAnimationtask pane: Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box,under Subtle, click Fade, and then click OK.Under Modify: Fade, in the Start list, select With Previous.Under Modify: Fade, in the Speed list, select Slow.Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box,under Subtle, click Expand, and then click OK.Under Modify: Expand, in the Start list, select With Previous.Under Modify: Expand, in the Speed list, select Fast.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Style 8 (second row, fourth option from the left). (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
Custom animation effects: faded zoom entrance and exit(Basic)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Select the picture. Under Picture Tools, on the Format tab, in the PictureStyles group, click PictureShape, and then under Rectangles click RoundedRectangle (second option from the left).On the picture, drag the yellow diamond adjustment handle toward the corner to decrease the rounding on the corners of the rectangle. Under Picture Tools, on the Format tab, in the PictureStyles group, click PictureEffects,point to Shadow, and then under Outer clickOffsetCenter (second row, second option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the picture. In the CustomAnimationtask pane, click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom, and then click OK. Under Modify: Faded Zoom, in the Start list, select With Previous.Under Modify: Faded Zoom, in the Speed list, select Medium.Also in the Custom Animation task pane, click Add Effect, point to Exit, and then click MoreEffects. In the Add Exit Effect dialog box, under Subtle, click Faded Zoom, and then click OK. Under Modify: Faded Zoom, in the Start list, select On Click.Under Modify: Faded Zoom, in the Speed list, select Medium.To duplicate the animated picture effects on this slide, do the following:Select the first picture. On the Home tab, in theClipboard group, click the arrow under Paste, and then click Duplicate.Select the second picture.Under Picture Tools, on the Format tab, in theAdjust group, click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert.Select the second picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Select the second picture. On the Home tab, in theClipboard group, click the arrow under Paste, and then click Duplicate.Select the third picture. Under Picture Tools, on the Format tab, in theAdjust group, click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert.Select the third picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Press and hold CTRL, and then select all three pictures.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center. In the Custom Animation task pane, select the sixth animation effect (faded zoom exit effect for the third picture). Click the arrow to the right of the effect, and then click Remove.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
Custom animation effects: faded zoom entrance and exit(Basic)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Select the picture. Under Picture Tools, on the Format tab, in the PictureStyles group, click PictureShape, and then under Rectangles click RoundedRectangle (second option from the left).On the picture, drag the yellow diamond adjustment handle toward the corner to decrease the rounding on the corners of the rectangle. Under Picture Tools, on the Format tab, in the PictureStyles group, click PictureEffects,point to Shadow, and then under Outer clickOffsetCenter (second row, second option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the picture. In the CustomAnimationtask pane, click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom, and then click OK. Under Modify: Faded Zoom, in the Start list, select With Previous.Under Modify: Faded Zoom, in the Speed list, select Medium.Also in the Custom Animation task pane, click Add Effect, point to Exit, and then click MoreEffects. In the Add Exit Effect dialog box, under Subtle, click Faded Zoom, and then click OK. Under Modify: Faded Zoom, in the Start list, select On Click.Under Modify: Faded Zoom, in the Speed list, select Medium.To duplicate the animated picture effects on this slide, do the following:Select the first picture. On the Home tab, in theClipboard group, click the arrow under Paste, and then click Duplicate.Select the second picture.Under Picture Tools, on the Format tab, in theAdjust group, click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert.Select the second picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Select the second picture. On the Home tab, in theClipboard group, click the arrow under Paste, and then click Duplicate.Select the third picture. Under Picture Tools, on the Format tab, in theAdjust group, click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert.Select the third picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 5.5” and the Width box is set to 6.5”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes.Press and hold CTRL, and then select all three pictures.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Click Align Center. In the Custom Animation task pane, select the sixth animation effect (faded zoom exit effect for the third picture). Click the arrow to the right of the effect, and then click Remove.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
Custom animation effects: duplicate picture with varied brightness to full color(Advanced)Tip: For the effects on this slide, use a picture with a “portrait” (vertical) orientation. To reproduce the text effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, select Georgiafrom the Font list, enter 34 in the Font Size box, click Italic, click the arrow next to Font Color, and then under Theme Colors click Aqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Drag the text box into the upper half of the slide, slightly left of the center.To reproduce the first picture with animation effects on this slide, do the following:On the Insert tab, in the Illustrations group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 3.81” and the Width box is set to 2.54”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Drag the picture into the into the top left corner of the slide. (Note: Align the left edge of the picture with the left edge of the slide, and leave a small margin between the top edge of the picture and the top edge of the slide.)Select the picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher.In the Format Picture dialog box, in the left pane, click Picture, and then do the following in the Picture pane: Click the button next to Recolor, and then select the recolor option that works best with the picture. (Note: The first picture in the example above is set to No Recolor.)In the Brightness box, enter 50%. (Note: You may want to adjust the brightness settings for the picture you have chosen.)On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the picture, and then do the following in the Custom Animation task pane:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box,under Basic, click Fly In, and then click OK.Under Modify: Fly In, in the Start list, select With Previous. Under Modify: Fly In,in the Direction list, select From Left.Under Modify: Fly In,in the Speed list, select Fast.Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box,under Subtle, click Expand, and then click OK.Under Modify: Expand, in the Start list, select With Previous.Under Modify: Expand, in the Speed list, select Fast.To reproduce the second picture with animation effects on this slide, do the following:On the slide, select the picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.Drag the second picture until the left side slightly overlaps the right side of the first picture.Select the second picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher.In the Format Picture dialog box, in the left pane, click Picture. In the Picture pane, in the Brightness box, enter 40%. (Note: You may want to adjust the brightness settings for the picture you have chosen.)Press and hold CTRL, and then select the third and fourth animation effects (fly-in and expand effects for the second picture) in the CustomAnimation task pane. Click the arrow to the right of one of the animation effects, and then click Timing. In the Effect Options dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK.To reproduce the third picture with animation effects on this slide, do the following:On the slide, select the second picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.Drag the third picture until its left side slightly overlaps the right side of the second picture.Select the third picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher.In the Format Picture dialog box, in the left pane, click Picture. In the Picture pane, in the Brightness box, enter 20%. (Note: You may want to adjust the brightness settings for the picture you have chosen.)Press and hold CTRL, and then select the fifth and sixth animation effects (fly-in and expand effects for the third picture) in the CustomAnimation task pane. Click the arrow to the right of one of the animation effects, and then click Timing. In the Effect Options dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK.To reproduce the fourth picture with animation effects on this slide, do the following:On the slide, select the third picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.Drag the fourth picture until its left side slightly overlaps the right side of the third picture.Select the fourth picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher.In the Format Picture dialog box, in the left pane, click Picture. In the Picture pane, in the Brightness box, enter 0%. Press and hold CTRL, and then select the seventh and eighth animation effects (fly-in and expand effects for the fourth picture) in the CustomAnimation pane. Click the arrow to the right of one of the animation effects, and then click Timing. In the Effect Options dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK.To reproduce the fifth picture with animation effects on this slide, do the following:On the slide, select the fourth picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.Drag the fifth picture until its left side slightly overlaps the right side of the fourth picture.Select the fifth picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher.In the Format Picture dialog box, in the left pane, click Picture. In the Picture pane, click the button next to Recolor, and then under No Recolor click No Recolor. Press and hold CTRL, and then select the ninth and 10th animation effects (fly-in and expand effects for the fifth picture) in the CustomAnimation task pane. Click the arrow to the right of one of the selected animation effects, and then click Timing. In the Effect Options dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK.To reproduce the animation effects for the text box on this slide, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.In the Selection and Visibility pane, select the text box, and then do the following in the CustomAnimation task pane:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box,under Subtle, click Fade, and then click OK.Under Modify: Fade, in the Start list, select With Previous. Under Modify: Fade, in the Speed list, select Very Fast.In the Selection and Visibility pane, press and hold CTRL, and then select the first, second, third, and fourth pictures. In the CustomAnimation task pane do the following:Click Add Effect, point to Exit, and then click MoreEffects. In the Add Exit Effect dialog box,under Moderate, click Stretchy, and then click OK.Under Modify: Stretchy, in the Start list, select With Previous. Under Modify: Stretchy, in the Speed list, select Fast.Also in the Custom Animation task pane, select the 12th animation effect (first stretchy effect for the text box). Click the arrow to the right of the animation effect, and then click Timing. In the Stretchy dialog box, on the Timing tab, in the Delay box, enter 1.4, and then click OK.Also in the Custom Animation task pane, select the 13th animation effect (second stretchy effect for the text box). Click the arrow to the right of the animation effect, and then click Timing. In the Stretchy dialog box, on the Timing tab, in the Delay box, enter 1.6, and then click OK.Also in the Custom Animation task pane, select the 14th animation effect (third stretchy effect for the text box). Click the arrow to the right of the animation effect, and then click Timing. In the Stretchy dialog box, on the Timing tab, in the Delay box, enter 1.8, and then click OK.Also in the Custom Animation task pane, select the 15th animation effect (fourth stretchy effect for the text box). Click the arrow to the right of the animation effect, and then click Timing. In the Stretchy dialog box, on the Timing tab, in the Delay box, enter 2.0, and then click OK.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5%(second row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 34%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left). Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 50% (sixth row, first option from the left).
Custom animation effects: floating petals(Difficult)Tip: For best results with the animation effects on this slide, choose a picture with an object that is made up of multiple parts, like the flower in this example. To reproduce the background effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. Right-click the slide and then click FormatBackground.In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 7.5”.In the Shape Width box, enter 10”.On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then click No Outline.On the Home tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Gradient fill, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).In the Transparency box, enter 40%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5%(sixth row, second option from the left).In the Transparency box, enter 10%.Select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Middle.Click Align Center. To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Lines, click Freeform (11th option from the left).On the slide, click points to trace an outline around a shape on the background picture (in the example above, one of the flower petals). Right-click the freeform shape and click Edit Points. To make the freeform shape more similar to the shape on the picture, right-click a place to include another point, and click AddPoints. Drag the new point to follow the contour of the shape on the picture. To outline rounded edges of the shape on the picture, right-click a straight line segment, and click Curved Segment.Select the freeform shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane, select No line. Also in the Format Shape dialog box, click Fill in the left pane, and then in the Fill pane, select Slide background fill. Repeat the process in steps 1-5to create six full-color shapes on the slide (in the example above, six flower petals from the same flower). To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the rectangle.In the Custom Animation task pane, do the following:Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade, and then click OK. UnderModify: Fade, in theStartlist, select After Previous.UnderModify: Fade, in theSpeedlist, select Medium.On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following:Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Spin, and then click OK. Press and hold CTRL and select all of the freeform spin effects. Under Modify: Spin, in the Start list, select With Previous. Under Modify: Spin, in the Speed list, select Medium. Also in the Custom Animation task pane, do the following to edit each freeform shape spin effect:Select the first freeform shape spin effect, and then do the following:Under Modify: Spin, in the Start list, select After Previous.Under Modify: Spin, in the Amount list, in the Custom box, enter 360⁰, and then press ENTER. Also in the Amount list, click Counterclockwise. Select the second freeform shape spin effect, and then do the following:Under Modify: Spin, in the Amount list, in the Custom box, enter 30⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.3.Select the third freeform shape spin effect, and then do the following:Under Modify: Spin, in the Amount list, in the Custom box, enter 40⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.3.Select the fourth freeform shape spin effect, and then do the following:Under Modify: Spin, in the Amount list, in the Custom box, enter 90⁰, and then press ENTER. Also in the Amount list, click Counterclockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.4.Select the fifth freeform shape spin effect, and then do the following:Under Modify: Spin, in the Amount list, in the Custom box, enter 90⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.5.Select the sixth freeform shape spin effect, and then do the following:Under Modify: Spin, in the Amount list, in the Custom box, enter 360⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.6.In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following:Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink, and then click OK. Press and hold CTRL and select all of the grow/shrink effects (the final six effects in the list). Under Modify: Grow/Shrink, in the Start list, select With Previous. Under Modify: Grow/Shrink, in the Speed list, select Medium. Also in the Custom Animation task pane, do the following to edit each freeform shape grow/shrink effect:Select the first freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 40%, and then press ENTER. Also in the Size list, click Vertical. In the pane, drag the effect until it is third in the list of effects. Select the second freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 50%,and then press ENTER. Also in the Size list, click Horizontal. In the pane, drag the effect until it is fifth in the list of effects. Select the third freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 50%,and then press ENTER. Also in the Size list, click Horizontal. In the pane, drag the effect until it is seventh in the list of effects. Select the fourth freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 40%,and then press ENTER. Also in the Size list, click Vertical. In the pane, drag the effect until it is ninth in the list of effects. Select the fifth freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 50%,and then press ENTER. Also in the Size list, click Horizontal.In the pane, drag the effect until it is 11th in the list of effects. Select the sixth freeform shape grow/shrink effect, and then do the following:Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 50%,and then press ENTER. Also in the Size list, click Horizontal. In the pane, drag the effect until it is 13th in the list of effects. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, click Add effect, point to Motion Path, point to Draw Custom Motion Path, and then click Curve. On the slide, click five points to create a simple curved motion path, starting on the group of freeform shapes and ending off the right side of the slide. Double-click the final point to accept the motion path.In the Custom Animation task pane, do the following:Press and hold CTRL and select all of the freeform shape custom path effects (the final six effects in the list). Under Modify: Custom Path, in the Start list, select With Previous. Under Modify: Custom Path,in the Speed list, select Medium.Also in the Custom Animation task pane, do the following:Drag the first custom path effect until it is fourth in the list of effects. Drag the second custom path effect until it is seventh in the list of effects. Drag the third custom path effect until it is 10th in the list of effects. Drag the fourth custom path effect until it is 13th in the list of effects. Drag the fifth custom path effect until it is 16th in the list of effects. Drag the sixth custom path effect until it is 19th in the list of effects.
For reproduction steps for this slide, refer to the PowerPoint template titled “Static text effects for PowerPoint slides” (STATIC_TEXT.potx), slide number 17.