238803344 tutorial-de-buo77-erdas-imagine-2014 como instalar
1. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 1 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
TUTORIAL DE INSTALACIÓN DE ERDAS IMAGINE 2014
MATERIA: RECTIFICACION Y RESTITUCION FOTOGRAMETRICA (FOT-854)
AUXILIAR ACADÉMICO: BRUNO RICHARD BLANCO ALARCON
VERSION: 14.00.0100
AÑO: 2014
2. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 2 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
PREPARACIÓN, REQUISITOS Y REQUERIMIENTOS
Preparación
About this Release
This document describes the enhancements for ERDAS IMAGINE 2014 Minor Release 1, including
IMAGINE Photogrammetry (formerly LPS Core) and ERDAS ER Mapper. Although the information in
this document is current as of the product release, see the Intergraph Support website for the most
current version.
This release includes both enhancements and fixes. For information on fixes that were made to ERDAS
IMAGINE for this release, see the Issues Resolved report on the Intergraph Support website for a
specific product.
This document is only an overview and does not provide all of the details about the product's
capabilities. See the online help and other documents provided with ERDAS IMAGINE for more
information.
Requisitos
Copyright (C) 2013 Intergraph Security, Government & Infrastructure
Many Intergraph SG&I Products require the .Net Framework 4 Full Profile.
The simplest way to load the necessary .Net Framework onto your computer system is to run the
Setup.vbs file. This will automatically start the .Net Framework installer (if it is not already loaded), and
then automatically proceed to the Intergraph Setup Manager.
Alternatively, you can manually launch the .NET Framework 4 Full Profile installer
(dotNetFx40_Full_x86_x64.exe), followed by the Intergraph Setup Manager (Setup.exe).
Regional Note: If your region has a language pack for the .Net Framework 4 Full Profile, this may be
installed at any later time.
New Platforms
Please refer to the Supported Environments document for full details on all platforms supported by
ERDAS IMAGINE 2014 Minor Release 1. However some key changes are noted below.
Microsoft Windows 8.1
The official release version of Windows 8.1 has now been tested and certified as supported with ERDAS
IMAGINE 2014 Minor Release 1.
Stereo Support in Windows 8
3. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 3 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Stereo visualization in Windows 8 is now supported for all Stereo enabled ERDAS IMAGINE applications
(SPMT, TE, ORIMA, PRO600, Stereo Analyst). For a list of supported graphics cards, refer to system
requirements document on the Intergraph Support website
ArcGIS 10.2
With the Minor Release 1 update, ERDAS IMAGINE 2014 supports being installed alongside ArcGIS
10.2 (or ArcGIS 10.2.1 if running on Windows 8.1) to provide Geodatabase support within ERDAS
IMAGINE 2014. Note that this requires the use of an ArcGIS license.
Alternatively, the IMAGINE Geodatabase Support installer can be used to provide Geodatabase support
if ArcGIS is not going to be installed and licensed (on any of the Operating Systems supported by
ERDAS IMAGINE).
Requerimiento:
Se debe tener las siguientes carpetas de archivos los cuales están dentro de la carpeta principal
ERDAS IMAGINE & ERDAS ER Mapper
Cada uno con el siguiente detalle:
1.- foundation-v14.0-win, Tamaño en disco: 1,49 GB, Contiene: 485 archivos, 118 carpetas
2.- Intergraph_License_Administration_Tool_11.11.1, Tamaño en disco: 138 MB, Contiene: 223
archivos, 62 carpetas
3.- imagine-v14.0-win-x86, Tamaño en disco: 2,98 GB, Contiene: 22.581 archivos, 830 carpetas
4.- Crack of ERDAS IMAGINE 2014, Tamaño en disco: 73,1 MB, Contiene: 29 archivos, 27 carpetas
CONTENIDO:
1. Instalación de foundation-v14.0-win
2. Instalación de Intergraph_License_Administration_Tool_11.11.1
3. Instalación de imagine-v14.0-win-x86
4. Modo de craquear ERDAS IMAGINE 2014
Desarrollo:
1. Instalación de foundation-v14.0-win
4. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 4 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Ejecutar el archivo Setup.exe que se encuentra dentro la carpeta foundation-v14.0-win en modo como
administrador y se abrirá la siguiente venta:
En donde se debe dar click con el botón izquierdo del maus en el texto donde dice instalar.
Luego se abrirá la venta donde de configuración para la instalación en Windows, una vez configurada
automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Next >
Luego automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Install.
5. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 5 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Al culminar las instalación se abrirá automáticamente la siguiente ventana en donde se debe hacer click
con el botón izquierdo del maus en donde dice Finish para terminar la instalación
2. Instalación de Intergraph_License_Administration_Tool_11.11.1
Ejecutar el archivo Setup.exe que se encuentra dentro la carpeta Intergraph License Administration Tool
11.11.1 en modo como administrador y se abrirá la siguiente venta:
En donde se debe dar click con el botón izquierdo del maus en el texto donde dice instalar.
Luego se abrirá la venta donde de configuración para la instalación en Windows, una vez configurada
automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Next >
6. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 6 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Luego automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Install.
Al culminar las instalación se abrirá automáticamente la siguiente ventana en donde se debe hacer click
con el botón izquierdo del maus en donde dice Finish para terminar la instalación
3. Instalación de imagine-v14.0-win-x86
Ejecutar el archivo Setup.exe que se encuentra dentro la carpeta imagine-v14.0-win-x86 en modo como
administrador y se abrirá la siguiente venta:
En donde se debe dar click con el botón izquierdo del maus en el texto donde dice instalar.
7. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 7 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Luego se abrirá la venta donde de configuración para la instalación en Windows, una vez configurada
automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Next >
Luego automáticamente se desplegara la siguiente ventana en donde se debe hacer click con el botón
izquierdo del maus en donde dice Install.
Al culminar las instalación se abrirá automáticamente la siguiente ventana en donde se debe hacer click
con el botón izquierdo del maus en donde dice Finish para terminar la instalación
4. Modo de craquear ERDAS IMAGINE 2014
En la carpeta 4.- Crack of ERDAS IMAGINE 2014 se deberá ingresar al carpeta x86 que es el crack
para el sistema operativo de 32bits y ahí se encontrara la carpeta Program Files en donde están las
carpetas Common Files y Intergraph.
De la carpeta Common FilesIntergraphLicensing se deberá copiar y reemplazar toda la carpeta
11.11.1 en C:Program FilesIntergraphLicensing.
8. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 8 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
De la carpeta Intergraph se deberá copiar la carpeta ERDAS IMAGINE 2014 en C:Program
FilesIntergraph.
Luego se deberá dirigirse a la carpeta donde se instaló el programa de ERDAS IMAGINE 2014 si es
Windows seven estará en C:Program FilesIntergraphLicensing11.11.1Program y copiar ahí el archivo
Intergraph.lic. que se encuentra en la carpeta 4.- Crack of ERDAS IMAGINE 2014.
Ejecutar el archivo lmtools.exe que se encuentra dentro la misma carpeta en modo como administrador
y se abrirá la siguiente venta:
Donde nos dirigiremos a la pestaña de Config Services
Para luego configurar lo siguiente:
En service name se colocara el nombre del servidor, en este caso se nombró erdas 2014.
9. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 9 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
En Path to the lmgrd.exe file se deberá buscar el archivo lmgrd.exe haciendo click con el botón
izquierdo del maus en browse.
Donde se abrirá la ventana de búsqueda y nos dirigiremos a la carpeta de C:Program
FilesIntergraphLicensing11.11.1Program y ahí seleccionaremos el archivo lmgrd.exe y lo abriremos
con el botón de abrir.
Posteriormente en Path to the license file se deberá buscar el archivo Intergraph.lic haciendo click
con el botón izquierdo del maus en browse.
10. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 10 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Donde se abrirá la ventana de búsqueda y nos dirigiremos a la carpeta de C:Program
FilesIntergraphLicensing11.11.1Program y ahí seleccionaremos el archivo Intergraph.lic y lo
abriremos con el botón de abrir.
Posteriormente en Path to the debug log file se deberá buscar el archivo 2014-07-20.log haciendo
click con el botón izquierdo del maus en browse.
Donde se abrirá la ventana de búsqueda y nos dirigiremos a la carpeta de C:Program
FilesIntergraphLicensing11.11.1Program y ahí seleccionaremos el archivo Intergraph.lic y lo
abriremos con el botón de abrir.
11. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 11 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Para después tiquear las casilla de Start Server at Power Up y Use Services.
Para culminar guardar la configuración haciendo click con el botón izquierdo del maus en Save Service.
Una vez culminada esta operación toda la venta deberá quedar de la siguiente manera:
12. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 12 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
luego nos dirigiremos a la pestaña de Star/Stop/Reread para hacer corer la licencia haciendo click con
el botón izquierdo del maus en primero Start Server y luego en Reread License File.
Para finalizar nos dirigiremos al archivo Intergraph.Licensing.Administrator.exe en C:Program
FilesIntergraphLicensing11.11.1Program y lo ejecutaremos en modo administrador.
13. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 13 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
En donde primero importaremos el archivo Intergraph.lic que es la licencia por medio de la pestaña
File/Import License File…
Donde se abrirá la ventana de búsqueda y nos dirigiremos a la carpeta de C:Program
FilesIntergraphLicensing11.11.1Program y ahí seleccionaremos el archivo Intergraph.lic y lo
abriremos con el botón de abrir.
14. LA PAZ – BOLIVIA - 2014
UMSA – FACTEC - TOPGEO
AUTOR: BRUNO RICHARD BLANCO ALARCON
PÁGINA 14 DE 14
LABORATORIO
TEXTO GUÍA DE FOT-854
Y con eso ya estará todo listo para que comiences a emplear el ERDAS IMAGINE 2014.