Enviar búsqueda
Cargar
01 caratula
•
0 recomendaciones
•
26 vistas
Danny Jorge Huicy Fernandez
Seguir
no
Leer menos
Leer más
Empresariales
Denunciar
Compartir
Denunciar
Compartir
1 de 1
Descargar ahora
Descargar para leer sin conexión
Recomendados
Q-TrainingPresentation
Q-TrainingPresentation
Francisco Quintero
weel control
406 lesson 7
406 lesson 7
Adolfo Angulo
E-book da IADC mostrando as competências e habilidades que deve ser demonstrada pelos profissionais que trabalham em Plataformas de Perfuração. (em inglês). As funções descritas são: Roustabout (Homem de área) Floorman (Plataformista) Derrickman (Torrista) Crane Operator (Guindasteiro) Motorman (Auxiliar de Mecânico) Mechanic (Mecânico) Electrician (Eletricista) Driller and Assistant Driller (Sondador e Assistente de Sondador) Toolpusher (Encarregado de Sonda) OIM (Gerente da Sonda) Fonte: http://www.iadc.org/committees/training/documents/KSA%20Book.PDF
IADC - KSA Book
IADC - KSA Book
Victor Couto Alves
The problem of water and gas coning has plagued the petroleum industry for decades. Water or gas encroachment in oil zone and thus simultaneous production of oil & water or oil & gas is a major technical, environmental and economic problems associated with oil and gas production. This can limit the productive life of the oil and gas wells and can cause severe problems including corrosion of tubulars, fine migration, hydrostatic loading etc. The environmental impact of handling, treating and disposing of the produced water can seriously affect the economics of the production. Commonly, the reservoirs have an aquifer beneath the zone of hydrocarbon. While producing from oil zone, there develops a low pressure zone as a result of which the water zone starts coning upwards and gas zone cones down towards the production perforation in oil zone and thus reducing the oil production. Pressure enhanced capillary transition zone enlargement around the wellbore is responsible for the concurrent production. This also results in the loss of water drive and gas drive to a certain extent. Numerous technologies have been developed to control unwanted water and gas coning. In order to design an effective strategy to control the coning of oil or gas, it is important to understand the mechanism of coning of oil and gas in reservoirs by developing a model of it. Non-Darcy flow effect (NDFE), vertical permeability, aquifer size, density of well perforation, and flow behind casing increase water coning/inflow to wells in homogeneous gas reservoirs with bottom water are important factors to consider. There are several methods to slow down coning of water and/or gas such as producing at a certain critical rate, polymer injection, Downhole Water Sink (DWS) technology etc. Shubham Saxena B.Tech. petroleum Engineering IIT (ISM) Dhanbad
Water coning in oil wells and DWS technology
Water coning in oil wells and DWS technology
shubhamsaxena2329
Iadc tricone bits
Iadc tricone bits
Igor Cencic :.
Offshore drilling and production equipment - ha noi university of mining and geography
Offshore drilling and production equipment (1)
Offshore drilling and production equipment (1)
nhuvangiap
This Training include several parts of Oil & Gas Engineering: Petroleum Geology Process Presentation Utilities in an Oil & Gas Field Process Engineering Safety Engineering Mechanical Engineering Civil Engineering Control & Instrumentation Engineering Electrical Engineering Design Engineering - 3D Model Field Engineering Commissioning & Startup For more détails, please contact: Ramzi Fathallah https://www.linkedin.com/in/ramzi-fathallah-a3762b85?trk=nav_responsive_tab_profile
Oil & Gas Engineering
Oil & Gas Engineering
Ramzi Fathallah
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 5
Fundamentals of Petroleum Engineering Module 5
Aijaz Ali Mooro
Recomendados
Q-TrainingPresentation
Q-TrainingPresentation
Francisco Quintero
weel control
406 lesson 7
406 lesson 7
Adolfo Angulo
E-book da IADC mostrando as competências e habilidades que deve ser demonstrada pelos profissionais que trabalham em Plataformas de Perfuração. (em inglês). As funções descritas são: Roustabout (Homem de área) Floorman (Plataformista) Derrickman (Torrista) Crane Operator (Guindasteiro) Motorman (Auxiliar de Mecânico) Mechanic (Mecânico) Electrician (Eletricista) Driller and Assistant Driller (Sondador e Assistente de Sondador) Toolpusher (Encarregado de Sonda) OIM (Gerente da Sonda) Fonte: http://www.iadc.org/committees/training/documents/KSA%20Book.PDF
IADC - KSA Book
IADC - KSA Book
Victor Couto Alves
The problem of water and gas coning has plagued the petroleum industry for decades. Water or gas encroachment in oil zone and thus simultaneous production of oil & water or oil & gas is a major technical, environmental and economic problems associated with oil and gas production. This can limit the productive life of the oil and gas wells and can cause severe problems including corrosion of tubulars, fine migration, hydrostatic loading etc. The environmental impact of handling, treating and disposing of the produced water can seriously affect the economics of the production. Commonly, the reservoirs have an aquifer beneath the zone of hydrocarbon. While producing from oil zone, there develops a low pressure zone as a result of which the water zone starts coning upwards and gas zone cones down towards the production perforation in oil zone and thus reducing the oil production. Pressure enhanced capillary transition zone enlargement around the wellbore is responsible for the concurrent production. This also results in the loss of water drive and gas drive to a certain extent. Numerous technologies have been developed to control unwanted water and gas coning. In order to design an effective strategy to control the coning of oil or gas, it is important to understand the mechanism of coning of oil and gas in reservoirs by developing a model of it. Non-Darcy flow effect (NDFE), vertical permeability, aquifer size, density of well perforation, and flow behind casing increase water coning/inflow to wells in homogeneous gas reservoirs with bottom water are important factors to consider. There are several methods to slow down coning of water and/or gas such as producing at a certain critical rate, polymer injection, Downhole Water Sink (DWS) technology etc. Shubham Saxena B.Tech. petroleum Engineering IIT (ISM) Dhanbad
Water coning in oil wells and DWS technology
Water coning in oil wells and DWS technology
shubhamsaxena2329
Iadc tricone bits
Iadc tricone bits
Igor Cencic :.
Offshore drilling and production equipment - ha noi university of mining and geography
Offshore drilling and production equipment (1)
Offshore drilling and production equipment (1)
nhuvangiap
This Training include several parts of Oil & Gas Engineering: Petroleum Geology Process Presentation Utilities in an Oil & Gas Field Process Engineering Safety Engineering Mechanical Engineering Civil Engineering Control & Instrumentation Engineering Electrical Engineering Design Engineering - 3D Model Field Engineering Commissioning & Startup For more détails, please contact: Ramzi Fathallah https://www.linkedin.com/in/ramzi-fathallah-a3762b85?trk=nav_responsive_tab_profile
Oil & Gas Engineering
Oil & Gas Engineering
Ramzi Fathallah
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 5
Fundamentals of Petroleum Engineering Module 5
Aijaz Ali Mooro
100% Job Assistance. IADC approved Petroleum training institute in India. Practical Hand-on training on drilling rig.
PetroTalent Institute of Petroleum Technology
PetroTalent Institute of Petroleum Technology
Sharad Agarwal
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 4
Fundamentals of Petroleum Engineering Module 4
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 6
Fundamentals of Petroleum Engineering Module 6
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module-1
Fundamentals of Petroleum Engineering Module-1
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 3
Fundamentals of Petroleum Engineering Module 3
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 2
Fundamentals of Petroleum Engineering Module 2
Aijaz Ali Mooro
Petroleum Production Engineering
Petroleum Production Engineering - Perforation
Petroleum Production Engineering - Perforation
James Craig
Petrel is main software in petroleum industry and geophysical study.
Petrel course
Petrel course
Amir Hossein Mardan
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
Petroleum Refinery Engineering-Part-2-30-July-2016
Petroleum Refinery Engineering-Part-2-30-July-2016
Muhammad Rashid Usman
explanation of reservoir engineering
Applied reservoir eng
Applied reservoir eng
mohamad1286
Petroleum Geology, Petroleum Engineering, Origin of Petroleum (Formation, Migration, & Accumulation of Petroleum)
Petroleum Geology - Origin of Petroleum
Petroleum Geology - Origin of Petroleum
James Craig
Basics of drilling 1
Basics of drilling 1
SATYANARAYANA I
useful for offshore structure designer.
Introduction to offshore structure
Introduction to offshore structure
Indian Maritime University, Visakhapatnam
Drilling operation and components
Drilling operation and components
Choong KW
Introduction to offshore oil and gas surface facilities, including drilling rig types, topside and substructures, jacket, compliant tower, jack up, gravity based structure, fpso, fso, semi submersible, tlp, spar, wellhead platform, processing platform, pipeline, and surface facilities selection
Introduction to Offshore Oil and Gas Surface Facilities
Introduction to Offshore Oil and Gas Surface Facilities
Ir. Puput Risanto, IPM, PMP, PMI-RMP, ASEAN Eng
APUNTES
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
GianmarcoAdrianzenPe
MATERIAL DE ESTUDIOS
López-Administración de proyectos estudios de
López-Administración de proyectos estudios de
CesarRafaelBarreraBe1
Técnicas De Expresión Oral
Mapa mental Técnicas De Expresión Oral.pdf
Mapa mental Técnicas De Expresión Oral.pdf
jaimehuamanicardenas
Una breve presentación de los valores y antivalores en las organizaciones
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
JavierLopez591396
EXCELENTE
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
KarinaChavez80
MATERIAL DE ESTUDIOS
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
CesarRafaelBarreraBe1
"El Centro de Soluciones del Comité de la Pequeña Industria de la Sociedad Nacional de Industrias y TDConvergente, te invitan a nuestro Programa: Especialización Profesional en Transformación Digital. Este innovador Programa, único en el medio por desarrollar experiencias vivenciales para formular LINEAS MAESTRAS para el desarrollo de las empresas o de los sectores donde trabajan los participantes, fortalecerá tu liderazgo digital como dueño de negocio o alto directivo con capacidad de toma de decisiones. La especialización en Transformación Digital se centra en un programa de 10 EXPERIENCIAS y desde las primeras sesiones se incentiva el LIDERAZGO, LA ESTRATEGIA Y LA TECNOLOGÍA, así mismo, se propicia el uso de la Inteligencia Artificial y la formación de grupos de trabajo durante el desarrollo del Programa construyendo en forma conjunta con todos los participantes un enfoque holistico que puede acelerar significativamente el paso de nuestras organizaciones hacia la cuarta revolución industrial.
Programa de Especializacion Transformación Digital.pdf
Programa de Especializacion Transformación Digital.pdf
WILFREDO ELIAS PIMENTEL SERRANO
Más contenido relacionado
Destacado
100% Job Assistance. IADC approved Petroleum training institute in India. Practical Hand-on training on drilling rig.
PetroTalent Institute of Petroleum Technology
PetroTalent Institute of Petroleum Technology
Sharad Agarwal
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 4
Fundamentals of Petroleum Engineering Module 4
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 6
Fundamentals of Petroleum Engineering Module 6
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module-1
Fundamentals of Petroleum Engineering Module-1
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 3
Fundamentals of Petroleum Engineering Module 3
Aijaz Ali Mooro
Fundamentals of Petroleum Engineering
Fundamentals of Petroleum Engineering Module 2
Fundamentals of Petroleum Engineering Module 2
Aijaz Ali Mooro
Petroleum Production Engineering
Petroleum Production Engineering - Perforation
Petroleum Production Engineering - Perforation
James Craig
Petrel is main software in petroleum industry and geophysical study.
Petrel course
Petrel course
Amir Hossein Mardan
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
Petroleum Refinery Engineering-Part-2-30-July-2016
Petroleum Refinery Engineering-Part-2-30-July-2016
Muhammad Rashid Usman
explanation of reservoir engineering
Applied reservoir eng
Applied reservoir eng
mohamad1286
Petroleum Geology, Petroleum Engineering, Origin of Petroleum (Formation, Migration, & Accumulation of Petroleum)
Petroleum Geology - Origin of Petroleum
Petroleum Geology - Origin of Petroleum
James Craig
Basics of drilling 1
Basics of drilling 1
SATYANARAYANA I
useful for offshore structure designer.
Introduction to offshore structure
Introduction to offshore structure
Indian Maritime University, Visakhapatnam
Drilling operation and components
Drilling operation and components
Choong KW
Introduction to offshore oil and gas surface facilities, including drilling rig types, topside and substructures, jacket, compliant tower, jack up, gravity based structure, fpso, fso, semi submersible, tlp, spar, wellhead platform, processing platform, pipeline, and surface facilities selection
Introduction to Offshore Oil and Gas Surface Facilities
Introduction to Offshore Oil and Gas Surface Facilities
Ir. Puput Risanto, IPM, PMP, PMI-RMP, ASEAN Eng
Destacado
(15)
PetroTalent Institute of Petroleum Technology
PetroTalent Institute of Petroleum Technology
Fundamentals of Petroleum Engineering Module 4
Fundamentals of Petroleum Engineering Module 4
Fundamentals of Petroleum Engineering Module 6
Fundamentals of Petroleum Engineering Module 6
Fundamentals of Petroleum Engineering Module-1
Fundamentals of Petroleum Engineering Module-1
Fundamentals of Petroleum Engineering Module 3
Fundamentals of Petroleum Engineering Module 3
Fundamentals of Petroleum Engineering Module 2
Fundamentals of Petroleum Engineering Module 2
Petroleum Production Engineering - Perforation
Petroleum Production Engineering - Perforation
Petrel course
Petrel course
Petroleum Refinery Engineering-Part-2-30-July-2016
Petroleum Refinery Engineering-Part-2-30-July-2016
Applied reservoir eng
Applied reservoir eng
Petroleum Geology - Origin of Petroleum
Petroleum Geology - Origin of Petroleum
Basics of drilling 1
Basics of drilling 1
Introduction to offshore structure
Introduction to offshore structure
Drilling operation and components
Drilling operation and components
Introduction to Offshore Oil and Gas Surface Facilities
Introduction to Offshore Oil and Gas Surface Facilities
Último
APUNTES
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
GianmarcoAdrianzenPe
MATERIAL DE ESTUDIOS
López-Administración de proyectos estudios de
López-Administración de proyectos estudios de
CesarRafaelBarreraBe1
Técnicas De Expresión Oral
Mapa mental Técnicas De Expresión Oral.pdf
Mapa mental Técnicas De Expresión Oral.pdf
jaimehuamanicardenas
Una breve presentación de los valores y antivalores en las organizaciones
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
JavierLopez591396
EXCELENTE
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
KarinaChavez80
MATERIAL DE ESTUDIOS
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
CesarRafaelBarreraBe1
"El Centro de Soluciones del Comité de la Pequeña Industria de la Sociedad Nacional de Industrias y TDConvergente, te invitan a nuestro Programa: Especialización Profesional en Transformación Digital. Este innovador Programa, único en el medio por desarrollar experiencias vivenciales para formular LINEAS MAESTRAS para el desarrollo de las empresas o de los sectores donde trabajan los participantes, fortalecerá tu liderazgo digital como dueño de negocio o alto directivo con capacidad de toma de decisiones. La especialización en Transformación Digital se centra en un programa de 10 EXPERIENCIAS y desde las primeras sesiones se incentiva el LIDERAZGO, LA ESTRATEGIA Y LA TECNOLOGÍA, así mismo, se propicia el uso de la Inteligencia Artificial y la formación de grupos de trabajo durante el desarrollo del Programa construyendo en forma conjunta con todos los participantes un enfoque holistico que puede acelerar significativamente el paso de nuestras organizaciones hacia la cuarta revolución industrial.
Programa de Especializacion Transformación Digital.pdf
Programa de Especializacion Transformación Digital.pdf
WILFREDO ELIAS PIMENTEL SERRANO
presentacion ppt
PRESENTACION FIDELIZACION DE CLIENTES.ppt
PRESENTACION FIDELIZACION DE CLIENTES.ppt
LEONELREYES28
Sistema de Administracion de Personal, en funcion publica procura que todo personal de una institucion o entidad publica, se guie bajo la Ley 1178, que es la normativa legal vigente en dichas instituciones.
SISTEMA DE ADMINISTRACION DE PERSONAL.pptx
SISTEMA DE ADMINISTRACION DE PERSONAL.pptx
ANGULOVASQUEZMARIAGE
Libro: "Contabilidad Hotelera, de Restaurantes y de Gestión" Capitulo II Escrito por el Contador Público Alcides Peña Sánchez
Resumen del libro: Contabilidad Hotelera, de Restaurantes y de Gestión Capitu...
Resumen del libro: Contabilidad Hotelera, de Restaurantes y de Gestión Capitu...
andreacachata
PLAN DE NEGOCION Y EJEMPLOS
PLAN DE NEGOCIOS EJEMPLOS VARIOS utb.pptx
PLAN DE NEGOCIOS EJEMPLOS VARIOS utb.pptx
SergioAntonioAaguaya
Infografía RESPONSABILIDAD CIVIL Y PENAL - CULPA PATRONAL
Infografía RESPONSABILIDAD CIVIL Y PENAL - CULPA PATRONAL
Infografía RESPONSABILIDAD CIVIL Y PENAL - CULPA PATRONAL
bygilprl
MATERIAL DE ESTUDIOS
Metodología de la investigación, 4ta Edición - César A. Bernal-FREELIBROS.ME.pdf
Metodología de la investigación, 4ta Edición - César A. Bernal-FREELIBROS.ME.pdf
CesarRafaelBarreraBe1
asesoría jurídica inmobiliaria +56941055309
OBRAS QUE NO NECESITAN PERMISO DE CONSTRUCCIÓN
OBRAS QUE NO NECESITAN PERMISO DE CONSTRUCCIÓN
Arquitecto Chile
lkjbpivnw'ifbnw'0irijbwtrb
NGANGAS_pdf.pdf9uhrg9hrg8hre8rg8rg4tg45g4
NGANGAS_pdf.pdf9uhrg9hrg8hre8rg8rg4tg45g4
EromJimmy1
MENTORÍA "HABILIDADES BLANDAS" COMUNICACIÓN EFECTIVA, EMPATÍA Y GESTIÓN DE CONFLICTOS Este curso de habilidades blandas, impartido mediante un formato de MENTORÍA especializada, está diseñado para desarrollar y fortalecer las competencias interpersonales y de autogestión esenciales para el éxito profesional. A través de 6 sesiones (Las sesiones se coordinarán de manera flexible, ajustándose a la disponibilidad de la agenda del cliente para garantizar la máxima conveniencia y participación) de 45 minutos cada una, los participantes tendrán la oportunidad de aprender, practicar y aplicar estrategias efectivas para mejorar su desempeño en el ámbito laboral. #MentoríaHabilidadesBlandas #ComunicaciónEfectiva #EmpatíaProfesional #GestiónDeConflictos #DesarrolloProfesional #LiderazgoEmpático #EscuchaActiva #TrabajoEnEquipo #ResoluciónDeConflictos #HabilidadesInterpersonales #MentoríaProfesional #CrecimientoPersonal #HabilidadesDeLiderazgo #InteligenciaEmocional #ColaboraciónEfectiva #DesarrolloDeCompetencias #ComunicaciónAsertiva #ResilienciaLaboral #FeedbackConstructivo #AdaptabilidadProfesional OBJETIVOS: Comprender la Importancia de las Habilidades Blandas en el Entorno Profesional Actual: • Reconocer cómo las habilidades blandas, como la comunicación efectiva, la empatía y la gestión de conflictos, son fundamentales para el éxito en el mundo laboral actual, donde las relaciones interpersonales y la inteligencia emocional juegan un papel crucial en el desempeño profesional. Desarrollar y Fortalecer Competencias Clave en Habilidades Blandas: • Mejorar la comunicación efectiva para establecer relaciones sólidas, fomentar la empatía para comprender y conectar con los demás, y dominar la gestión de conflictos para resolver disputas de manera constructiva, potenciando así el trabajo en equipo y el liderazgo efectivo. Aprender Técnicas Avanzadas de Autoconocimiento y Gestión Emocional: • Adquirir herramientas prácticas para aumentar la conciencia personal, identificar fortalezas y áreas de mejora, gestionar emociones de manera positiva y cultivar la adaptabilidad al cambio, promoviendo un crecimiento personal y profesional continuo. Aplicar de Forma Efectiva los Conocimientos Adquiridos en Escenarios Reales: • Practicar y transferir las habilidades desarrolladas en situaciones laborales reales, enfrentando desafíos cotidianos con confianza, resolviendo conflictos de manera constructiva y mejorando la comunicación interpersonal para lograr resultados exitosos y sostenibles. Recibir Retroalimentación Personalizada y Orientación de un Mentor Especializado: • Obtener comentarios específicos y guía experta de un mentor en habilidades blandas, permitiendo un crecimiento individualizado, la identificación de áreas de mejora personalizadas y el desarrollo de un plan de acción para alcanzar metas profesionales con éxito y confianza. METODOLOGÍA: El Curso "Habilidades Blandas: Comunicación Efectiva, Empatía y Gestión de Conflictos"
MENTORÍA HABILIDADES BLANDAS COMUNICACIÓN EFECTIVA, EMPATÍA Y GESTIÓN DE CONF...
MENTORÍA HABILIDADES BLANDAS COMUNICACIÓN EFECTIVA, EMPATÍA Y GESTIÓN DE CONF...
Oxford Group
REGIMEN LABORAL MYPE
REGIMEN LABORAL - MYPE EN EL PERU 2024.pptx
REGIMEN LABORAL - MYPE EN EL PERU 2024.pptx
MoisesZamalloa
Descubre en este ebook la historia y funciones de Aceros de Guatemala, Grupo AG, una corporación líder en la fabricación y distribución de productos derivados del acero, concreto y cal. Con más de siete décadas de experiencia, Grupo AG opera en Guatemala y Honduras, y distribuye en 11 países de la región. Conozca cómo su enfoque en la innovación, excelencia y sostenibilidad ha permitido un crecimiento sostenido y un impacto positivo en los mercados donde actúa.
Aceros de Guatemala Orígenes y Propósito de la Corporación que Revolucionó la...
Aceros de Guatemala Orígenes y Propósito de la Corporación que Revolucionó la...
casoacerosdeguatemal
MENTORÍA en Habilidades Blandas: Comunicación Efectiva, Trabajo en Equipo, Liderazgo y Gestión Emocional Embárcate en un viaje de desarrollo personal y profesional con nuestro exclusivo curso de habilidades blandas. Impartido en un formato de MENTORÍA especializada, este programa está diseñado para potenciar tus competencias interpersonales y de autogestión, clave para alcanzar el éxito en tu carrera. Durante 6 sesiones dinámicas de 45 minutos cada una, te sumergirás en un mundo de aprendizaje práctico y aplicado. Descubrirás estrategias efectivas que te ayudarán a brillar en tu entorno laboral, potenciando tu desempeño y destacando tus habilidades únicas. ¡Prepárate para desbloquear tu máximo potencial y alcanzar nuevas alturas profesionales! #HabilidadesBlandas #ComunicaciónEfectiva #TrabajoEnEquipo #Liderazgo #GestiónEmocional #DesarrolloPersonal #ÉxitoLaboral #MentoríaEspecializada #ComunicaciónAsertiva #InteligenciaEmocional #ResolverConflictos #TomaDeDecisiones #MotivaciónyEquipos #AutoconocimientoLaboral #AprendizajeExperiencial #HabilidadesInterPersonales #AutorregulaciónyEstrés #ResilienciaLaboral #DesarrolloDeHabilidades #MentoríaHabilidadesBlandas
MENTORÍA en Habilidades Blandas Comunicación Efectiva, Trabajo en Equipo, L...
MENTORÍA en Habilidades Blandas Comunicación Efectiva, Trabajo en Equipo, L...
Oxford Group
Imágenes de cortinas, persianas, toldos, etc.
Imágenes de cortinas, persianas, toldos, etc.
Imágenes de cortinas, persianas, toldos, etc.
Comunidad sdm
Último
(20)
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
GRUPO 14-DIAPOSITIVAS DEL PROYECTO.pptx,
López-Administración de proyectos estudios de
López-Administración de proyectos estudios de
Mapa mental Técnicas De Expresión Oral.pdf
Mapa mental Técnicas De Expresión Oral.pdf
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
DEFINICIÓN, CARACTERISTICAS Y DIFERENCIAS ENTRE LOS VALORES Y LOS ANTIVALORES...
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
BUENAS PRACTICA DE ALMACENAMIENTO PARA DROGUERIAS LABORATORIOS Y ALMACENES ES...
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
METODOLOGIA_DE_LA_INVESTIGACION_LAS_RUTA.pdf
Programa de Especializacion Transformación Digital.pdf
Programa de Especializacion Transformación Digital.pdf
PRESENTACION FIDELIZACION DE CLIENTES.ppt
PRESENTACION FIDELIZACION DE CLIENTES.ppt
SISTEMA DE ADMINISTRACION DE PERSONAL.pptx
SISTEMA DE ADMINISTRACION DE PERSONAL.pptx
Resumen del libro: Contabilidad Hotelera, de Restaurantes y de Gestión Capitu...
Resumen del libro: Contabilidad Hotelera, de Restaurantes y de Gestión Capitu...
PLAN DE NEGOCIOS EJEMPLOS VARIOS utb.pptx
PLAN DE NEGOCIOS EJEMPLOS VARIOS utb.pptx
Infografía RESPONSABILIDAD CIVIL Y PENAL - CULPA PATRONAL
Infografía RESPONSABILIDAD CIVIL Y PENAL - CULPA PATRONAL
Metodología de la investigación, 4ta Edición - César A. Bernal-FREELIBROS.ME.pdf
Metodología de la investigación, 4ta Edición - César A. Bernal-FREELIBROS.ME.pdf
OBRAS QUE NO NECESITAN PERMISO DE CONSTRUCCIÓN
OBRAS QUE NO NECESITAN PERMISO DE CONSTRUCCIÓN
NGANGAS_pdf.pdf9uhrg9hrg8hre8rg8rg4tg45g4
NGANGAS_pdf.pdf9uhrg9hrg8hre8rg8rg4tg45g4
MENTORÍA HABILIDADES BLANDAS COMUNICACIÓN EFECTIVA, EMPATÍA Y GESTIÓN DE CONF...
MENTORÍA HABILIDADES BLANDAS COMUNICACIÓN EFECTIVA, EMPATÍA Y GESTIÓN DE CONF...
REGIMEN LABORAL - MYPE EN EL PERU 2024.pptx
REGIMEN LABORAL - MYPE EN EL PERU 2024.pptx
Aceros de Guatemala Orígenes y Propósito de la Corporación que Revolucionó la...
Aceros de Guatemala Orígenes y Propósito de la Corporación que Revolucionó la...
MENTORÍA en Habilidades Blandas Comunicación Efectiva, Trabajo en Equipo, L...
MENTORÍA en Habilidades Blandas Comunicación Efectiva, Trabajo en Equipo, L...
Imágenes de cortinas, persianas, toldos, etc.
Imágenes de cortinas, persianas, toldos, etc.
01 caratula
1.
Manual de Well
Control Acreditación IACD WellCAP ID WC 300416
Descargar ahora