Descargado 42 veces
Subido porJulian Camilo España Saavedra
Antirretrovirales
Este documento describe las propiedades y uso de la didanosina, un antiviral que inhibe la replicación del VIH al bloquear la formación de ADN proviral. Se usa en combinación con otros antirretrovirales para tratar la infección por VIH-1. Debe administrarse oralmente en ayunas para maximizar su absorción. Puede causar efectos adversos como diarrea, náuseas y elevación de enzimas hepáticas. Su uso durante el embarazo y la lactancia requiere precaución.
Más contenido relacionado
La actualidad más candente
Similar a Antirretrovirales
Más de Julian Camilo España Saavedra
![Manejo de via aerea en situciones especiales [autoguardado]](https://cdn.slidesharecdn.com/ss_thumbnails/manejodeviaaereaensitucionesespecialesautoguardado-190624111755-thumbnail.jpg?width=640&height=640&fit=bounds)
Antirretrovirales
- 2. ESTAVUDINA AZIDOTIMIDI DIDANOSINA NA
- 5. Antivírico frente aVIH. Inhibe la transcriptasa inversa por competición con el sustrato natural timidina trifosfato y la síntesis de ADN viral.
- 7. Se usa encombinación con otros antirretrovirales, como tratamiento de infectados por VIH.
- 11. Debe administrarse conel estómago vacío, es decir, al menos una hora antes de las comidas, si esto no fuera posible, puede tomarse con una comida ligera. Las cápsulas duras pueden abrirse cuidadosamente y mezclar el contenido con alimento.
- 13.
- 15. • Monitorizar conantecedentes de pancreatitis o de neuropatía periférica • Riesgo de acidosis láctica con hepatomegalia, hepatitis u otros factores de riesgo en especial mujeres obesas, e infectados con hepatitis C • suspender si aparece hepatomegalia progresiva o elevación rápida de aminotransferasas • Riesgo de: lipodistrofia, osteonecrosis, reconstitución inmune con inmunodeficiencia grave, disfunción mitocondrial en niños
- 16. Principalmente, riesgo de: • Insuficiencia hepática • Insuficiencia renal
- 17. En el Embarazo Experienciaclínica limitada, pero hay observados casos de anomalías congénitas y abortos; estudios preclínicos evidencian paso a través de placenta. No usar salvo necesidad.
- 18. En la Lactancia Serecomienda que las mujeres infectadas por el VIH no amamanten bajo ninguna circunstancia, para evitar la transmisión del VIH.
- 19. Además… Estudios en rataslactantes demostraron que estavudina se excreta en la leche materna. Por esta razón debe recomendarse a las madres interrumpir la lactancia antes de tomar estavudina
- 21. • Diarrea • Mareos • Dolor abdominal • Sueños anormales • Náusea • Cefalea • Dispepsia • Insomnio • Fatiga • Pensamiento anormal • Lipoatrofia • Somnolencia • Lipodistrofia • Depresión • Neuropatía periférica • Erupción • Parestesia • Prurito • Neuritis periférica
- 24. Antiviral frente a retrovirus,inhibe la transcriptasa inversa bloqueando la formación de ADN proviral.
- 26. • Oral: terapia decombinación antirretroviral a infectados por VIH quimioprofilaxis en embarazadas VIH+ (gestación > 14 sem) para prevenir transmisión materno-fetal de VIH profilaxis de VIH en recién nacidos.
- 27. • IV: tto. acorto plazo de manifestación grave de infección por VIH en pacientes con SIDA cuando tto. oral no es posible quimioprofilaxis en embarazadas VIH+ (gestación > 14 sem) profilaxis VIH en recién nacidos.
- 29. • Hipersensibilidad • hiperbilirrubinemia en recién nacidos
- 31. • Riesgo deanemia, leuco y neutropenia Disfunción mitocondrial en niños expuestos durante la gestación • Lipodistrofia • Deficiencia inmune grave • Osteonecrosis • Acidosis láctica • Evitar concomitancia con: rifampicina, estavudina
- 32. Principalmente, riesgo de: • Insuficiencia hepática • Insuficiencia renal
- 34. • Toxicidad aumentadapor: ác. valproico, fluconazol, metadona • Riesgo de reacciones adversas con: cotrimoxazol, amfotericina, ganciclovir, interfe rón; principalmente • Absorción reducida por: claritromicina, espaciar mín. 2 h • IV: no mezclar con otros fármacos por ausencia de estudios de compatibilidad
- 35. En el Embarazo Datoslimitados de uso en embarazo, debe utilizarse antes de sem 14 de gestación sólo cuando el beneficio para madre y feto supere los riesgos.
- 36. En la Lactancia Dadoque el fármaco y el virus pasan a la leche, se recomienda que las madres que estén tomando zidovudina no amamanten a sus hijos.
- 38. • Anemia, neutro y leucopenia • Cefalea • Mareo • Náuseas y vómitos • Dolor abdominal • Diarrea • Elevación de enzimas hepáticas y bilirrubina • Mialgia • Malestar
- 41. • Inhibe lareplicación viral y la transcriptasa inversa del VIH impidiendo la síntesis de ADN provírico.
- 43. • Tto. deinfección por VIH-1, combinado con otros antirretrovirales.
- 45. • Oral (enayunas). – Debe administrarse en ayunas debido a que los alimentos disminuyen su absorción – En Niños debe ser combinado con zidovudina
- 47.
- 49. • Riesgo deneuropatía periférica • Riesgo de acidosis láctica en sujetos con hepatomegalia • Riesgo de lesiones retinianas o del nervio óptico • Inmunodepresión • Osteonecrosis • Lipodistrofia y daño mitocondrial
- 50. Principalmente, riesgo de: • Insuficiencia hepática • Insuficiencia renal
- 52. • Reacción adversaaumentada por: inhibidores de oxidasa xantina • Absorción disminuida por: alimentos • Exposición reducida por: metadona
- 53. En el Embarazo •Sólo si beneficio supera riesgo potencial. Sin estudios adecuados y bien controlados, se ignora si puede causar lesión fetal en embarazo. En animales no se han evidenciado efectos nocivos.
- 54. En la Lactancia Seignora si didanosina se excreta en la leche materna. Se recomienda que las mujeres en tratamiento con didanosina no lacten por que el VIH sí se excreta en la lactancia.
- 56. • Diarrea, Fatiga • síntoma neurológico periférico • cefalea, náuseas, vómitos • dolor abdominal • erupción cutánea • aumento de ALT y AST, • Pancitopenia • cambio retiniano o del nervio óptico • Más frecuente en niños: hematotoxicidad (con zidovudina)
Notas del editor
- #2 SmartArt custom animation effects: continuous picture list(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Continuous Picture List (third row, fourth option from the left) to insert the graphic into the slide.On the slide, select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 5.05”.In the Width box, enter 7.57”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click More, and then under Best Match for Document clickselect Moderate Effect (fourth option from the left).Click each of the three picture placeholders in the SmartArt graphic, and then in the Insert Picture dialog box, select a picture and click Insert.Press and hold CTRL, and then select the three circle pictures on the slide.Under PictureTools, on theFormat tab, in the PictureStyles group, click PictureEffects, point toGlow, and then do the following:Under Glow Variations, click Accent color 1, 8 pt glow(second row, first option from the left).Point to MoreGlowColors,and then under Theme Colors click Orange, Accent 6, Lighter 80% (second row, 10th option from the left).Select the left-right arrow at the bottom of the SmartArt graphic. Under SmartArtTools, on the Format tab, in the ShapeStyles group, click the arrow next to ShapeFill, point to Gradient, and then click MoreGradients. In the Format Shape dialog box, click Fill in the left pane,select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme ColorsclickOrange, Accent 6, Darker 25% (fifth row, 10th option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then click MoreColors. In the Colors dialog box,on theCustom tab, enter values for Red: 255, Green: 192, Blue: 0.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme ColorsclickOrange, Accent 6, Darker 25% (fifth row, 10th option from the left).Press and hold CTRL, and then select the three rounded rectangles on the slide. On the Home tab, in the Font group, select Gill Sans MT from the Font list, enter 30 pt in the Font Size box, click the arrow next to Font Color, and then click White, Background 1 (first row, first option from the left).Under SmartArtTools, on the Format tab, in the ShapeStyles group, click Shape Effects, point to Reflection, and then under ReflectionVariations click Tight reflection, touching (first row, first option from the left).Under SmartArtTools, on the Format tab, in the ShapeStyles group, click Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 19%.Click the button next to Color, and then under Theme ColorsclickBlack, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter100%.Click the button next to Color, and then under Theme ColorsclickBlack, Text 1, Lighter 50% (second row, second option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the Custom Animation task pane, do the following:Click Add Effect, point to Entrance, and then clickMoreEffects. In the Add Entrance Effect dialog box, underModerate, clickStretch. Under Modify: Stretch, in the Speed list, selectFast.Also in the CustomAnimation task pane, click the arrow to the right of the animation effect, and then click Effect Options. In the Stretch dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by One.Also in the CustomAnimation task pane, click the double arrows under the animation effect to expand the list of effects. Press and hold CTRL, and then select all of the animation effects in the Custom Animation task pane. Under Modify: Stretch, in the Start list, selectWith Previous.Select the first animation effect (stretch effect for the left-right arrow) in the CustomAnimation task pane. Under Modify: Stretch, click the arrow to the right of the effect, and then click Timing. In the Stretch dialog box, on the Timing tab, do the following: In the Delay box, enter 0.5.In the Speed box, enter 1.5 seconds.Press and hold CTRL, and then select the second and third animation effects (stretch effects for the left panel) in the CustomAnimation task pane. Under Modify: Stretch, in the Direction list, select From Right. Also in the Custom Animation task pane, with the second and third animation effects still selected, click the arrow to the right of one of those effects, and then click Timing. In the Stretch dialog box, on the Timing tab, in the Delay box, enter 1, and then click OK.Press and hold CTRL, and then select the sixth and seventh animation effects (stretch effects for the right panel) in the Custom Animation task pane. Under Modify: Stretch, in the Direction list, select From Left. Also in the Custom Animation task pane, with the sixth and seventh animation effects still selected, click the arrow to the right of one of those effects, and then click Timing. In the Stretch dialog box, on the Timing tab, in the Delay box, enter 1.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center(third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).
- #3 Picture-filled text with reflection(Basic)To reproduce the text effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Franklin Gothic Heavy from the Font list, select 36 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Under Drawing Tools, on the Format tab, in the WordArt Styles group, click the arrow next toText Fill, and then click Picture. In the Insert Picture dialog box, select a picture and then click Insert. Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations select Tight Reflection, touching (first row, first option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Bevel, and then under Bevel click Angle (second row, first option from the left). To reproduce the background on this slide, do the following:Right-click the slide background area, then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then clickLinear Down (first row, second option from the left).In the Angle box, enter 90%. Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter64%.Click the button next to Color, and thenunder Theme Colorsclick Black, Text 1, Lighter 5% (sixth row, second option from the left).Select Stop 2 from the list, and then do the following:In the Stop position box, enter65%.Click the button next to Color, and then under Theme Colorsclick Black, Text 1, Lighter 5% (sixth row, second option from the left).Select Stop 3 from the list, and then do the following:In the Stop position box, enter100%. Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).
- #4 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #5 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #6 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #7 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #8 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #9 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #10 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #11 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #12 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #13 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #14 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #15 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #16 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #17 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #18 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #19 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).
- #20 Glowing“neon tubes” text with reflection(Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Arial Rounded MT Boldfrom the Font list, select 60 from the Font Size list, and then click Bold.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacingtab, in the Spacing list, select Expanded. In the By box, enter 2.Select the text box. Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click TextFill in the left pane, select Gradient fill in the TextFill pane, and then do the following:Click the button next to Preset colors, and then click Ocean (second row, second option from the left).In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left).In the Angle box, enter 45°.Also in the Format Text Effects dialog box, click Text Outline in the left pane. In the Text Outline pane, select Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Text Effects dialog box, click Outline Style in the left pane. In the Outline Style pane, in the Width box, enter 0.75 pt. Also in the Format Text Effects dialog box, click 3-DFormatin the left pane, and then do the following in the 3-DFormatpane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 0.8 pt.Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Depth box, enter 4.5 pt.Under Surface, click the button next to Material, and then under Translucent click Powder (first option from the left). Click the button next to Lighting, and then under Special click Glow (third option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Glow, and then under Glow Variations click Accent color 5, 8 pt glow (second row, fifth option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations click Half Reflection, 4 pt offset (second row, second option from the left). Drag the text box vertically on the slide to position it slightly above the middle.Select the text box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, and then click the button next to Color, and under Theme Colors click Black, Text 1 (first row, second option from the left).